Customer Support: +1 416-401-8730

Login to i2i Subscription Intertek.com
  • There are no items in your cart
Please enter a keyword to search
Advanced search

AS/NZS 1664.2:1997

Current
Current

The latest, up-to-date edition.

Aluminium structures Allowable stress design (Reconfirmed 2020)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

09-05-1997

Publisher

Standards Australia

Preview

SECTION 1 GENERAL 1.1 SCOPE 1.2 MATERIALS 1.3 SAFETY FACTORS 1.4 REFERENCED DOCUMENTSSECTION 2 DESIGN PROCEDURE 2.1 PROPERTIES OF SECTIONS 2.2 PROCEDURE 2.3 LOADINGSECTION 3 GENERAL DESIGN RULES 3.1 INTRODUCTION 3.2 NOMENCLATURE 3.3 TABLES RELATING TO MECHANICAL PROPERTIES AND BUCKLING CONSTANTS 3.4 ALLOWABLE STRESSESSECTION 4 SPECIAL DESIGN RULES 4.1 COMBINED AXIAL LOAD AND BENDING 4.2 TORSION AND SHEAR IN TUBES 4.3 TORSION AND BENDING IN OPEN SHAPES 4.4 COMBINED SHEAR, COMPRESSION AND BENDING 4.5 HORIZONTAL STIFFENERS FOR WEBS 4.6 VERTICAL STIFFENERS FOR SHEAR WEBS 4.7 EFFECTS OF LOCAL BUCKLING ON MEMBER PERFORMANCE 4.8 FATIGUE 4.9 COMPRESSION IN SINGLE WEB BEAMS AND BEAMS HAVING SECTIONS CONTAINING TUBULAR PORTIONS 4.10 COMPRESSION IN ELASTICALLY SUPPORTED FLANGESSECTION 5 MECHANICAL CONNECTIONS 5.1 BOLTED AND RIVETED CONNECTIONS 5.2 METAL STITCHING STAPLES 5.3 SELF TAPPING SCREW CONNECTIONSSECTION 6 FABRICATION 6.1 LAYING OUT 6.2 CUTTING 6.3 HEATING 6.4 PUNCHING, DRILLING AND REAMING 6.5 RIVETING 6.6 PAINTING 6.7 CLEANING AND TREATMENT OF METAL SURFACESSECTION 7 WELDED CONSTRUCTION 7.1 ALLOWABLE STRESSES FOR WELDED MEMBERS 7.2 FILLER WIRE 7.3 MEMBERS WITH LONGITUDINAL WELDS 7.4 MEMBERS WITH TRANSVERSE WELDS 7.5 WELDING FABRICATIONSECTION 8 TESTING 8.1 SCOPE AND GENERAL 8.2 TEST REQUIREMENTS 8.3 TESTS FOR DETERMINING MATERIAL PROPERTIES 8.4 PROCEDURE 8.5 REPORTING OF TEST RESULTS

Specifies requirements for the design of aluminium alloy load-carrying members using the allowable stress design criteria (ASD).

RECONFIRMATION NOTICE
Major stakeholders of this publication have reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 29 August 2018.
Approved for reconfirmation in New Zealand on behalf of the New Zealand Standards Approval Board on 18 June 2020.

This Standard specifies requirements for the design of aluminium alloy load carrying members and elements. The allowable stress design (ASD) criteria are intended as an alternative to the limit state design (LSD) criteria (see AS 1664.1). One design specification (ASD or LSD) applies throughout the design of a single structure.

Committee
BD/50
DocumentType
Standard
ISBN
0 7337 1284 3
Pages
75
ProductNote
See also AS 1664-1979 Reconfirmed 21/08/2020.
This standard has been reconfirmed in Australia in 2020 and remains current in New Zealand. Reconfirmation Notice 21/08/2020
PublisherName
Standards Australia
Status
Current
Supersedes

First published in Australia as part of AS 1664-1975.
Second edition 1979.
Jointly revised and designated AS/NZS 1664.2:1997.
Reconfirmed 2020. Originated in Australia as part of AS 1664-1975. Previous Australian edition AS 1664-1979. Jointly revised and designated AS/NZS 1664.2:1997. Incorporating: Amdt 1-1999

AS 1665-1992 Welding of aluminium structures
AS 1170.2-1989 Minimum design loads on structures (known as the SAA Loading Code) Wind loads
AS 1866-1986 Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes
AS 1170.3-1990 Minimum design loads on structures (known as the SAA Loading Code) - Snow loads
AS 1734-1986 Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate
AS 2848.1-1998 Aluminium and aluminium alloys - Compositions and designations Wrought products (Reconfirmed 2018)
AS 1865-1986 Aluminium and aluminium alloys - Drawn wire, rod, bar and strip
AS 1170.1-1981 Minimum design loads on structures (known as the SAA Loading Code) Dead and live loads
AS 1391-1991 Methods for tensile testing of metals
AS 1170.4-1993 Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads
AS 1867-1986 Aluminium and aluminium alloys - Drawn tubes

AS/NZS 1576.1:2010 Scaffolding General requirements
AS/NZS 1577:2013 Scaffold decking components
AS 1657-2013 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS/NZS 4613:2017 Automotive equipment - Brake force measuring instruments
AS 2047-1999 Windows in buildings - Selection and installation
AS/NZS 4994.1(INT):2004 Temporary roof edge protection for housing and residential buildings General requirements
AS 4997-2005 Guidelines for the design of maritime structures
AS/NZS 4994.4:2018 Temporary edge protection Perimeter Protection Screens
AS/NZS 1576.2:2009 Scaffolding Couplers and accessories
AS 2809.2:2020 Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids
AS 2809.2-1999 Road tank vehicles for dangerous goods - Tankers for flammable liquids
AS 1418.1-2002 Cranes, hoists and winches General requirements
AS 4041-2006 Pressure piping (Reconfirmed 2016)
AS 2809.4-2001 Road tank vehicles for dangerous goods - Tankers for toxic and corrosive cargoes
AS 2809.2-2008 Road tank vehicles for dangerous goods - Road tank vehicles for flammable liquids
AS 3533.1-2009 Amusement rides and devices Design and construction
AS/NZS 1562.2:1999 Design and installation of sheet roof and wall cladding Corrugated fibre-reinforced cement (Reconfirmed 2020)
AS 2316.1-2009 Artificial climbing structures and challenge courses Fixed and mobile artificial climbing and abseiling walls
AS/NZS 1577:2018 Scaffold decking components
AS 3785.5-1998 Underground mining - Shaft equipment Headframes
AS 1170.4-2007 Structural design actions Earthquake actions in Australia (Reconfirmed 2018)
AS 2809.4:2017 Road tank vehicles for dangerous goods Tankers for toxic and corrosive cargoes
AS 3962-2001 Guidelines for design of marinas
AS 1657:2018 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS/NZS 1665:2004 Welding of aluminium structures (Reconfirmed 2016)

View more information
US$153.80
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

or

Get in touch with us