• There are no items in your cart

AS/NZS 3007:2013

Current
Current

The latest, up-to-date edition.

Electrical equipment in mines and quarries - Surface installations and associated processing plant
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

06-24-2013

Preview

Applies to the design, installation and operation of electrical plant and equipment installed at surface mining and quarrying operations, the surface of underground mines, and associated processing plants.

Committee
EL-023
DocumentType
Standard
ISBN
978 1 74342 516 9
Pages
112
PublisherName
Standards Australia
Status
Current
Supersedes

Originated in Australia as AS 3007.1—1982, AS 3007.2—1982, AS 3007.3—1982, AS 3007.4—1985 and AS 3007.5—1987.Previous editions AS 3007.1—2004, AS 3007.2—2004, AS 3007.3—2004, AS 3007.4—2004 and AS 3007.5—2004.Jointly revised, amalgamated and redesignated AS/NZS 3007:2013. Originated in Australia as AS 3007.1-1982, AS 3007.2-1982, AS 3007.3-1982, AS 3007.4-1985 and AS 3007.5-1987. Previous editions AS 3007.1-2004, AS 3007.2-2004, AS 3007.3-2004, AS 3007.4-2004 and AS 3007.5-2004. Jointly revised, amalgamated and redesignated AS/NZS 3007:2013.

AS ISO 14520.14-2009 Gaseous fire-extinguishing systems - Physical properties and system design IG-55 extinguishant (ISO 14520-14:2005, MOD)
AS/NZS 1299:2009 Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV (Reconfirmed 2020)
AS 62061-2006 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
AS 4024.1101-2006 Safety of machinery Terminology - Terms and definitions
AS/NZS ISO 31000:2009 Risk management - Principles and guidelines
AS 7240.2-2004 Fire detection and alarm systems Control and indicating equipment (ISO 7240-2:2003, MOD)
AS 60974.6-2006 Arc welding equipment Limited duty portable arc welding and allied process power sources (IEC 60974-6:2003, MOD)
AS/NZS 61000.6.2:2006 Electromagnetic compatibility (EMC) General standards - Immunity for industrial environments (Reconfirmed 2016)
AS/NZS 61000.1.1:2000 Electromagnetic compatibility (EMC) General - Application and interpretation of fundamental definitions and terms (Reconfirmed 2016)
AS ISO 14520.11-2009 Gaseous fire-extinguishing systems - Physical properties and system design HFC 236fa extinguishant (ISO 14520-11:2005, MOD)
AS/NZS 60079.29.2:2008 Explosive atmospheres Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
AS 61508.0-2006 Functional safety of electrical/electronic/programmable electronic safety-related systems Functional safety and AS 61508 (Reconfirmed 2015)
AS 4024.4-1998 Safeguarding of machinery Installation and commissioning requirements for electro-sensitive systems - Pressure-sensitive devices (Reconfirmed 2016)
AS 2118.5-2008 Automatic fire sprinkler systems Home fire sprinkler systems (Reconfirmed 2020)
AS/NZS 1747:2003 Reeling, trailing and feeder cables used for mining - Repair, testing and fitting of accessories (Reconfirmed 2020)
AS 7240.10-2007 Fire detection and alarm systems Point-type flame detectors
AS 2118.8-1997 Automatic fire sprinkler systems Minor modifications (Reconfirmed 2013)
AS 4024.1801-2006 Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs
AS 2067-2008 Substations and high voltage installations exceeding 1 kV a.c.
AS/NZS 60079.14:2009 Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD)
AS 4024.1901-2006 Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - General principles for human interactions with displays and control actuators
AS 60044.2-2007 Instrument transformers Inductive voltage transformers (IEC 60044-2:Ed.1.2 (2003) MOD)
AS 1824.1-1995 Insulation co-ordination Definitions, principles and rules
AS 62040.2-2008 Uninterruptible power systems (UPS) - Electromagnetic compatibility (EMC) requirements
AS 2118.10-1995 Automatic fire sprinkler systems Approval documentation (Reconfirmed 2013)
AS/NZS 1768:2007 Lightning protection
AS 1603.7-1996 Automatic fire detection and alarm systems Optical beam smoke detectors (Reconfirmed 2016)
AS/NZS 61000.2.12:2003 Electromagnetic compatibility (EMC) Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems (Reconfirmed 2013)
AS/NZS 61000.3.4:2007 Electromagnetic compatibility (EMC) Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 75 A (Reconfirmed 2018)
AS/NZS 61000.2.2:2003 Electromagnetic compatibility (EMC) Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems (Reconfirmed 2013)
AS/NZS 61000.4.30:2012 Electromagnetic compatibility (EMC) Testing and measurement techniques - Power quality measurement methods
AS/NZS 61000.4.13:2012 Electromagnetic compatibility (EMC) Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
AS 60529-2004 Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018)
AS 61508.4-2011 Functional safety of electrical/electronic/programmable electronic safety-related systems Definitions and abbreviations (Reconfirmed 2023)
AS/NZS 61000.3.2:2007 Electromagnetic compatibility (EMC) Limits - Limits for harmonic current emissions (equipment input current (16 A per phase) (IEC 61000-3-2, Ed. 3.0 (2005) MOD)
AS/NZS 4871.1:2012 Electrical equipment for mines and quarries General requirements
AS/NZS 60079.10.1:2009 Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD)
AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 4024.1:2006 Series Safety of machinery Safety of machinery series
AS 4024.1401-2006 Safety of machinery Ergonomic principles - Design principles - Terminology and general principles
AS 4024.2601-2008 Safety of machinery Design of controls, interlocks and guarding - Two-hand control devices - Functional aspects and design principles
AS 2290.3-1990 Electrical equipment for coal mines - Maintenance and overhaul - Maintenance of gas detecting and monitoring equipment
AS 7240.7-2004 Fire detection and alarm systems Point-type smoke detectors using scattered light, transmitted light or ionization (ISO 7240-7:2003, MOD) (Reconfirmed 2016)
AS/NZS 61000.4.27:2012 Electromagnetic compatibility (EMC) Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase (Reconfirmed 2023)
AS 1603.13-1998 Automatic fire detection and alarm systems - Duct sampling units
AS 4024.3001-2009 Safety of machinery Materials forming and shearing - Mechanical power presses
AS 4024.3002-2009 Safety of machinery Materials forming and shearing - Hydraulic power presses
AS 4024.1803-2006 Safety of machinery Safety distances and safety gaps - Minimum gaps to prevent crushing of parts of the human body
AS 4024.3101-2008 Safety of machinery Materials cutting - Milling machines (including boring machines) - Safety requirements (Reconfirmed 2018)
AS 4024.1604-2006 Safety of machinery Design of controls, interlocks and guarding - Emergency stop - Principles for design
AS/NZS 3001:2008 Electrical installations - Transportable structures and vehicles including their site supplies
AS/NZS 4871.3:2010 Electrical equipment for mines and quarries Substations
AS 1603.15-2002 Automatic fire detection and alarm systems - Remote indicators
AS IEC 61511.3-2004 Functional safety - Safety instrumented systems for the process industry sector - Guidance for the determination of the required safety integrity levels (Reconfirmed 2015)
AS ISO 14520.15-2009 Gaseous fire-extinguishing systems - Physical properties and system design IG-541 extinguishant (ISO 14520-15:2005, MOD)
AS 7240.11-2008 Fire detection and alarm systems Manual call points (ISO 7240-11:2005, MOD)
AS 1603.3-1996 Automatic fire detection and alarm systems - Heat alarms
AS 61508.5-2011 Functional safety of electrical/electronic/programmable electronic safety-related systems Examples of methods for the determination of safety integrity levels (Reconfirmed 2023)
AS 7240.8-2007 Fire detection and alarm systems Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor
AS 1603.2-1997 Automatic fire detection and alarm systems Point type smoke detectors (Reconfirmed 2016)
AS/NZS 3012:2010 Electrical installations - Construction and demolition sites
AS 7240.5-2004 Fire detection and alarm systems Point type heat detectors (ISO 7240-5:2003, MOD)
AS 4024.1201-2006 Safety of machinery - General principles - Basic terminology and methodology
AS 7240.1-2007 Fire detection and alarm systems - General and definitions
AS 2118.3-2010 Automatic fire sprinkler systems Deluge systems
AS 1674.2-2007 Safety in welding and allied processes Electrical (Reconfirmed 2018)
AS/NZS 3439.1:2002 Low-voltage switchgear and controlgear assemblies Type-tested and partially type tested assemblies (IEC 60439-1:1999 MOD)
AS 4024.1902-2006 Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Displays
AS 2118.4-2012 Automatic fire sprinkler systems Sprinkler protection for accommodation buildings not exceeding four storeys in height
AS 4024.1301-2006 Safety of machinery Risk assessment - Principles of risk assessment
AS/NZS 61000.2.5:1999 Electromagnetic compatibility (EMC) Environment - Classification of electromagnetic environments (Reconfirmed 2016)
AS 1670.4-2004 Fire detection, warning, control and intercom systems - System design, installation and commissioning Sound systems and intercom systems for emergency purposes
AS/NZS 2802:2000 Electric cables - Reeling and trailing - For mining and general use (other than underground coal mining) (Reconfirmed 2020)
AS 4024.1501-2006 Safety of machinery Design of safety related parts of control systems - General principles for design (Reconfirmed 2014)
AS 4024.1907-2006 Safety of machinery Displays, controls, actuators and signals - System of auditory and visual danger and information signals
AS/NZS 61000.4.16:2002 Electromagnetic compatibility (EMC) Testing and measurement techniques - Test for immunity to conducted common mode disturbances in the frequency range 0 Hz to 150 kHz (Reconfirmed 2013)
AS/NZS 61000.4.11:2005 Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11, Ed. 2.0 (2004) MOD) (Reconfirmed 2016)
AS 1603.11-2010 Automatic fire detection and alarm systems Visual warning devices
AS 4024.1302-2006 Safety of machinery Risk assessment - Reduction of risks to health and safety from hazardous substances emitted by machinery - Principles and specifications for machinery manufacturers
AS 1319-1994 Safety signs for the occupational environment (Reconfirmed 2018)
AS 4024.1202-2006 Safety of machinery General principles - Technical principles
AS 1603.16-2002 Automatic fire detection and alarm systems - In situ testers
AS 2118.9-1995 Automatic fire sprinkler systems Piping support and installation (Reconfirmed 2013)
AS/NZS 4240.3:2013 Remote control systems for mining equipment Operation and maintenance for underground coal mining
AS 4024.1704-2006 Safety of machinery Human body measurements - Anthropometric data
AS ISO 14520.10-2009 Gaseous fire-extinguishing systems - Physical properties and system design HFC 23 extinguishant (ISO 14520-10:2005, MOD)
AS ISO 14520.1-2009 Gaseous fire-extinguishing systems - Physical properties and system design General requirements (ISO 14520-1:2006, MOD)
AS 7240.12-2007 Fire detection and alarm systems Line type smoke detectors using a transmitted optical beam
AS 61508.7-2011 Functional safety of electrical/electronic/programmable electronic safety-related systems Overview of techniques and measures (Reconfirmed 2023)
AS 4024.1603-2006 Safety of machinery Design of controls, interlocks and guards - Prevention of unexpected start-up (Reconfirmed 2014)
AS 7240.13-2006 Fire detection and alarm systems Compatibility assessment of system components
AS/NZS 61000.6.3:2012 Electromagnetic compatibility (EMC) Generic standards - Emission standard for residential, commercial and light-industrial environments
AS 62040.1.2-2003 Uninterruptible power systems (UPS) General and safety requirements for UPS used in restricted access locations
AS 1670.6-1997 Fire detection, warning, control and intercom systems - System design, installation and commissioning Smoke alarms
AS 7240.4-2004 Fire detection and alarm systems Power supply equipment (ISO 7240-4:2003, MOD)
AS 2293.1-2005 Emergency escape lighting and exit signs for buildings - System design, installation and operation
AS/NZS 5603:2009 Stand-alone inverters - Performance requirements (Reconfirmed 2017)
AS 7240.15-2004 Fire detection and alarm systems Point type fire detectors using scattered light, transmitted light or ionization sensors in combination with a heat sensor (ISO 7240-15:2004, MOD) (Reconfirmed 2016)
AS/NZS 1850:2009 Portable fire extinguishers - Classification, rating and performance testing (Reconfirmed 2021)
AS 2700-2011 Colour standards for general purposes (Reconfirmed 2022)
AS/NZS 61000.3.11:2002 Electromagnetic compatibility (EMC) Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current less than or equal to 75 A and subject to conditional connection (Reconfirmed 2013)
AS 61508.1-2011 Functional safety of electrical/electronic/programmable electronic safety-related systems General requirements (Reconfirmed 2023)
AS 7240.6-2006 Fire detection and alarm systems Carbon monoxide fire detectors using electro-chemical cells (Reconfirmed 2016)
AS 60076.1-2005 Power transformers General (IEC 60076-1, Ed. 2.1 (2000) MOD)
AS/NZS 3010:2005 Electrical installations - Generating sets
AS 4024.2801-2008 Safety of machinery Safety distances and safety gaps - Positioning of protective equipment with respect to the approach speed of parts of the human body
AS 61508.2-2011 Functional safety of electrical/electronic/programmable electronic safety-related systems Requirements for electrical/electronic/programmable electronic safety-related systems (Reconfirmed 2023)
AS 4024.1502-2006 Safety of machinery Design of safety related parts of control systems - Validation (Reconfirmed 2014)
AS/NZS 61000.4.7:2012 Electromagnetic compatibility (EMC) Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (Reconfirmed 2023)
AS 2118.1-2006 Automatic fire sprinkler systems General systems
AS 60044.1-2007 Instrument transformers Current transformers (IEC 60044-1 Ed.1.2 (2003) MOD)
AS/NZS 4763:2011 Safety of portable inverters (Reconfirmed 2024)
AS 7240.22-2008 Fire detection and alarm systems Smoke-detection equipment for ducts (ISO 7240-22:2007, MOD)
AS 1824.2-1985 Insulation coordination (phase-to-earth and phase-to-phase, above 1 kV) - Application guide
AS 4024.1905-2006 Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for marking
AS 61508.3-2011 Functional safety of electrical/electronic/programmable electronic safety-related systems Software requirements (Reconfirmed 2023)
AS/NZS 61000.6.1:2006 Electromagnetic compatibility (EMC) Generic standards - Immunity for residential, commercial and light industrial environments (Reconfirmed 2016)
AS 61508.6-2011 Functional safety of electrical/electronic/programmable electronic safety-related systems Guidelines on the application of IEC 61508-2 and IEC 61508-3 (Reconfirmed 2023)
AS 4024.3301-2009 Safety of machinery Robots for industrial environments - Safety requirements
AS 4024.1703-2006 Safety of machinery Principles for determining the dimensions required for access openings
AS 4024.1904-2006 Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for visual, auditory and tactile signals
AS 4024.1802-2006 Safety of machinery Safety distances and safety gaps - Safety distances to prevent danger zones being reached by the lower limbs
AS/NZS 61000.2.4:2009 Electromagnetic compatibility (EMC) Environment-Compatibility levels in industrial plants for low-frequency conducted disturbances (Reconfirmed 2020)
AS 1603.8-1996 Automatic fire detection and alarm systems Multi-point aspirated smoke detectors (Reconfirmed 2016)
AS/NZS 61000.3.5:1998 Electromagnetic compatibility (EMC) Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A
AS 1670.1-2004 Fire detection, warning, control and intercom systems - System design, installation and commissioning Fire
AS 1603.17-2011 Automatic fire detection and alarm systems Warning equipment for people with hearing impairment
AS/NZS 3100:2009 Approval and test specification - General requirements for electrical equipment
AS 61800.3-2005 Adjustable speed electrical power drive systems EMC requirements and specific test methods
AS/NZS 61000.3.12:2006 Electromagnetic compatibility (EMC) Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current greater than 16 A and less than or equal to 75 A per phase
AS/NZS 1020:1995 The control of undesirable static electricity
AS IEC 61511.1-2004 Functional safety - Safety instrumented systems for the process industry sector - Framework, definitions, systems, hardware and software requirements
AS 2444-2001 Portable fire extinguishers and fire blankets - Selection and location (Reconfirmed 2021)
AS ISO 14520.13-2009 Gaseous fire-extinguishing systems - Physical properties and system design IG-100 extinguishant (ISO 14520-13:2005, MOD)
AS/NZS 4836:2011 Safe working on or near low-voltage electrical installations and equipment
AS/NZS 4240.1:2009 Remote control systems for mining equipment Design, construction, testing, installation and commissioning (Reconfirmed 2021)
AS 2665-2001 Smoke/heat venting systems - Design, installation and commissioning (Reconfirmed 2016)
AS ISO 14520.12-2009 Gaseous fire-extinguishing systems - Physical properties and system design IG-01 extinguishant (ISO 14520-12:2005, MOD)
AS 1603.14-2001 Automatic fire detection and alarm systems - Point type carbon monoxide (CO) fire detectors
AS 1318-1985 Use of colour for the marking of physical hazards and the identification of certain equipment in industry (known as the SAA Industrial Safety Colour Code)
AS 60204.1-2005 Safety of machinery - Electrical equipment of machines General requirements (IEC 60204-1, Ed. 5 (FDIS) MOD)
AS 4024.1701-2006 Safety of machinery Human body measurements - Basic human body measurements for technological design
AS/NZS 61000.4.5:2006 Electromagnetic compatibility (EMC) Testing and measurement techniques - Surge immunity test
AS 4024.5-1998 Safeguarding of machinery Manufacturing and testing requirements for electro-sensitive systems - Pressure-sensitive devices
AS 61508 Supp1-2012 Functional safety of electrical/electronic/programmable electronic safety-related systems, Supplement 1: Commented version (Supplement to AS 61508 series) (Reconfirmed 2023)
AS/NZS 60079.10.2:2011 Explosive atmospheres Classification of areas - Combustible dust atmospheres
AS/NZS 3008.1.1:2009 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
AS 4024.1602-2006 Safety of machinery Interlocking devices associated with guards - Principles for design and selection
AS 60974.1-2006 Arc welding equipment Welding power sources (IEC 60974-1:2000, MOD)
AS 1603.1-1997 Automatic fire detection and alarm systems Heat detectors (Reconfirmed 2016)
AS 4024.1702-2006 Safety of machinery Human body measurements - Principles for determining the dimensions required for openings for whole body access into machinery
AS 1603.5-1996 Automatic fire detection and alarm systems Manual call points (Reconfirmed 2016)
AS/NZS 61000.4.8:2012 Electromagnetic compatibility (EMC) Testing and measurement techniques - Power frequency magnetic field immunity test (Reconfirmed 2023)
AS 62040.1.1-2003 Uninterruptible power systems (UPS) General and safety requirements for UPS used in operator access areas
AS 60076.11-2006 Power transformers Dry-type transformers
AS 7240.21-2006 Fire detection and alarm systems - Routing equipment
AS 1755-2000 Conveyors - Safety requirements
AS/NZS 61000.6.4:2012 Electromagnetic compatibility (EMC) Generic standards - Emission standard for industrial environments
AS 60044.5-2004 Instrument transformers Capacitor voltage transformers
AS/NZS 60079.17:2009 Explosive atmospheres Electrical installations inspection and maintenance (IEC 60079-17, Ed.4.0 (2007) MOD)
AS/NZS 61000.2.3:1999 Electromagnetic compatibility (EMC) Environment - Description of the environment - Radiated and non-network-frequency-related conducted phenomena (Reconfirmed 2016)
AS 4024.3-1998 Safeguarding of machinery Manufacturing and testing requirements for electro-sensitive systems - Optoelectronic devices
AS IEC 61511.2-2004 Functional safety - Safety instrumented systems for the process industry sector - Guidelines for the application of AS IEC 61511-1
AS 2118.6-2012 Automatic fire sprinkler systems Combined sprinkler and hydrant systems in multistorey buildings
AS 7240.20-2012 Fire detection and alarm systems Aspirating smoke detectors (Reconfirmed 2023)
AS/NZS 61000.4.15:2012 Electromagnetic compatibility (EMC) Testing and measurement techniques - Flickermeter - Functional and design specifications
AS 60044.3-2004 Instrument transformers Combined transformers
AS 4024.1906-2006 Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for the location and operation of actuators
AS/NZS 2081:2011 Electrical protection devices for mines and quarries (Reconfirmed 2022)
AS 2118.1-1999 Automatic fire sprinkler systems - General requirements
AS/NZS 4240.2:2009 Remote control systems for mining equipment Operation and maintenance for underground metalliferous mining (Reconfirmed 2021)
AS/NZS 61000.4.1:2006 Electromagnetic compatibility (EMC) Testing and measurement techniques - Overview of IEC 61000-4 series
AS/NZS 61000.4.34:2012 Electromagnetic compatibility (EMC) Testing and measurements techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (Reconfirmed 2023)
AS 4024.1601-2006 Safety of machinery Design of controls, interlocks and guarding - Guards - General requirements for the design and construction of fixed and movable guards
AS 1670.3-2004 Fire detection, warning, control and intercom systems - System design, installation and commissioning - Fire alarm monitoring
AS 4024.1903-2006 Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Control actuators
AS 1851-2012 Routine service of fire protection systems and equipment
AS 60204.11-2006 Safety of machinery - Electrical equipment of machines Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c and not exceeding 36 kV (IEC 60204-11, Ed. 1.0 (2000) MOD)
AS 2467-2008 Maintenance of electrical switchgear
AS/NZS 61000.3.3:2012 Electromagnetic compatibility (EMC) Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
AS/NZS 61000.4.14:2012 Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase (Reconfirmed 2023)
AS/NZS 4871.2:2010 Electrical equipment for mines and quarries Distribution, control and auxiliary equipment
AS 4436-1996 Guide for the selection of insulators in respect of polluted conditions
AS/NZS 1668.1:1998 The use of ventilation and airconditioning in buildings Fire and smoke control in multi-compartment buildings
AS/NZS 7000:2010 Overhead line design - Detailed procedures
AS/NZS 3800:2012 Electrical equipment for explosive atmospheres - Repair and overhaul
AS/NZS 4853:2012 Electrical hazards on metallic pipelines

SA/SNZ HB 146:2018 Management of electrical cable in mines and quarries
AS/NZS 3010:2017 Electrical installations - Generating sets
AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) Electrical installations (known as the Australian/New Zealand Wiring Rules)

View more information
US$152.72
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.