AS/NZS 3500.0:1995
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
National Plumbing and Drainage Code Glossary of terms
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
12-05-1995
Specifies terms primarily intended for use in the interpretation of plumbing and drainage Standards, and covers water supply from the reticulation main into the premises, including hot water service systems, sanitary fixtures, drainage and their associated water and waste fittings, pipe systems and associated components.
| Committee |
WS-014
|
| DocumentType |
Standard
|
| ISBN |
0 7337 0070 5
|
| Pages |
81
|
| PublisherName |
Standards Australia
|
| Status |
AvailableSuperseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
Under Revision see DR 03066 First published as AS 1355-1979.Revised and redesignated AS 3500.0-1990.Jointly revised and designated AS/NZS 3500.0:1995. First published as AS 1355-1979. Revised and redesignated AS 3500.0-1990. Jointly revised and designated AS/NZS 3500.0:1995.
| AS 1281-2001 | Cement mortar lining of steel pipes and fittings (Reconfirmed 2018) |
| AS 3496-1999 | Metal-bodied and plastic-bodied taps |
| AS 3500.2.1-1996 | National Plumbing and Drainage Sanitary plumbing and drainage - Performance requirements |
| AS 4139-2003 | Fibre-reinforced concrete pipes and fittings (Reconfirmed 2018) |
| AS/NZS 3500.1.2:1998 | National plumbing and drainage Water supply - Acceptable solutions |
| AS 3500.1.1-1998 | National plumbing and drainage Water supply - Performance requirements |
| AS/NZS 1546.3:2001 | On-site domestic wastewater treatment units Aerated wastewater treatment systems |
| AS/NZS 1730:1996 | Washbasins |
| AS/NZS 1260:1996 | PVC pipes and fittings for drain, waste and vent applications |
| AS 3494-1997 | Bidettes and bidets |
| AS/NZS 3500.4.2:1997 | National Plumbing and Drainage Hot water supply systems - Acceptable solutions |
| AS 3500.4.1-1997 | National Plumbing and Drainage Hot water supply systems - Performance requirements |
| AS/NZS 3500.2.2:1996 | National plumbing and drainage Sanitary plumbing and drainage - Acceptable solutions |
| AS/NZS 4130:2003 | Polyethylene (PE) pipes for pressure applications |
| AS 2050-2002 | Installation of roof tiles |
| AS 4809-2003 | Copper pipe and fittings - Installation and commissioning |
| AS/NZS 3499:1997 | Flexible tube connectors for water supply |
| ATS 5200.037.2-2005 | Technical Specification for plumbing and drainage products Flow controllers - For use in heated or cold water plumbing systems |
| AS 4321-2001 | Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings (Reconfirmed 2019) |
| AS/NZS 4130:2001 | Polyethylene (PE) pipes for pressure applications |
| AS/NZS 4131:2003 | Polyethylene (PE) compounds for pressure pipes and fittings |
| AS 1756-1999 | Household sinks |
| AS/NZS 1229:1997 | Laundry troughs and tubs |
| AS/NZS 4158:1996 | Thermal-bonded polymeric coatings on valves and fittings for water industry purposes |
| AS 2845.2-1996 | Water supply - Backflow prevention devices Air gaps and break tanks |
| AS/NZS 4129:2000 | Fittings for polyethylene (PE) pipes for pressure applications |
| AS/NZS 4158:2003 | Thermal-bonded polymeric coatings on valves and fittings for water industry purposes |
| AS/NZS 1254:2002 | PVC pipes and fittings for storm and surface water applications |
| DR 01195 CP | Laundry troughs and tubs |
| AS/NZS 3982:1996 | Urinals |
| AS/NZS 3718:2003 | Water supply - Tap ware |
| AS 1357.2-1998 | Valves primarily for use in warm and hot water systems - Control valves |
| AS 1172.2-1999 | Water closet (WC) pans of 6/3 L capacity or proven equivalent - Cisterns |
| AS/NZS 3500.5:2000 | National Plumbing and Drainage - Domestic installations |
| AS/NZS 4348:1995 | Water supply - Domestic type water treatment appliances - Performance requirements |
| AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS/NZS 3497:1998 | Drinking water treatment units - Plumbing requirements |
| AS 3500.3.1-1998 | National plumbing and drainage Stormwater drainage - Performance requirements |
| AS/NZS 4131:2001 | Polyethylene (PE) compounds for pressure pipes and fittings |
| MP 52-2001 | Manual of authorization procedures for plumbing and drainage products |
| AS/NZS 4936:2002 | Air admittance valves (AAVs) for use in sanitary plumbing and drainage systems (Reconfirmed 2020) |
| AS 3588-1996 | Shower bases and shower modules (Reconfirmed 2016) |
| AS 4796-2001 | Water supply - Metal bodied and plastic bodied ball valves for property service connection |
| AS/NZS 3718:1997 | Water supply - Metal-bodied taps - Specified by performance |
| AS 3498-2003 | Authorization requirements for plumbing products - Water heaters and hot-water storage tanks |
| AS/NZS 2041:1998 | Buried corrugated metal structures |
| AS 1589-2001 | Copper and copper alloy waste fittings (Reconfirmed 2018) |
| AS 4214-2002 | Gaseous fire extinguishing systems |
| AS/NZS 2280:1999 | Ductile iron pressure pipes and fittings |
| AS/NZS 4494:1998 | Discharge of commercial and industrial liquid waste to sewer - General performance requirements |
| AS 1579-2001 | Arc-welded steel pipes and fittings for water and wastewater (Reconfirmed 2018) |
| AS 3495-1997 | Stainless steel non-pressure pipes and fittings (Reconfirmed 2018) |
| AS/NZS 1260:2002 | PVC-U pipes and fittings for drain, waste and vent application |
| AS/NZS 3500.3.2:1998 | National plumbing and drainage Stormwater drainage - Acceptable solutions |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.