AS/NZS 4836:2011
AvailableSuperseded
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Safe working on or near low-voltage electrical installations and equipment
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
05-04-2011
Publisher
Provides workers on low-voltage electrical installations with: (a) the principles of safe working practices; and (b) recommended procedures for safe working practices.
This Standard outlines principles and procedures of safe work, organization and performance on or near low-voltage electrical installations and equipment. It provides a minimum set of procedures, safety requirements and recommendations to manage the hazards associated with electricity, specifically arc blast, arc flash, electric shock and electrocution. Adopting these will provide a safe working environment for work on or near low-voltage electrical installations (see Clause 1.6.9) and equipment (see Clause 1.6.8).
| Committee |
EL-044
|
| DocumentType |
Standard
|
| ISBN |
978 0 7337 9832 0
|
| Pages |
48
|
| PublisherName |
Standards Australia
|
| Status |
AvailableSuperseded
|
| SupersededBy | |
| Supersedes |
First published as AS/NZS 4836:2001.Second edition 2011. First published as AS/NZS 4836:2001. Second edition 2011. Reissued incorporating Amendment No. 1 (May 2017).
| AS/NZS 2978:1995 | Insulating mats for electrical purposes |
| AS 4024.1101-2006 | Safety of machinery Terminology - Terms and definitions |
| AS/NZS 1337.5:2004 | Personal eye-protection Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
| AS/NZS 1892.5:2000 | Portable ladders - Selection, safe use and care |
| AS 4024.1801-2006 | Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs |
| AS 2225-1994 | Insulating gloves for electrical purposes |
| AS 4024.1901-2006 | Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - General principles for human interactions with displays and control actuators |
| AS 1892.2-1992 | Portable ladders Timber (Reconfirmed 2022) |
| AS 2865-2009 | Confined spaces |
| AS/NZS 1891.1:2007 | Industrial fall-arrest systems and devices Harnesses and ancillary equipment |
| AS/NZS 1715:2009 | Selection, use and maintenance of respiratory protective equipment |
| AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS 4024.1401-2006 | Safety of machinery Ergonomic principles - Design principles - Terminology and general principles |
| AS 2550.10-2006 | Cranes, hoists and winches - Safe use Mobile elevating work platforms |
| AS 4024.1803-2006 | Safety of machinery Safety distances and safety gaps - Minimum gaps to prevent crushing of parts of the human body |
| AS 4024.1604-2006 | Safety of machinery Design of controls, interlocks and guarding - Emergency stop - Principles for design |
| AS/NZS 1337.0(Int):2010 | Personal eye protection - Eye and face protectors - Vocabulary |
| AS/NZS 1716:2003 | Respiratory protective devices |
| AS/NZS 61008.1:2004 | Residual current operated circuit breakers without integral overcurrent protection for household and similar uses (RCCBs) General rules (IEC 61008-1, Ed. 2.1 (2002) MOD) |
| AS/NZS 2210.1:2010 | Safety, protective and occupational footwear Guide to selection, care and use |
| AS 4024.1201-2006 | Safety of machinery - General principles - Basic terminology and methodology |
| AS/NZS 1892.1:1996 | Portable ladders Metal |
| AS/NZS 1337.1:2010 | Personal eye protection Eye and face protectors for occupational applications |
| AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
| AS/NZS 61558.2.3:2001 | Safety of power transformers, power supply units and similar devices Particular requirements for ignition transformers for gas and oil burners (IEC 61558-2-3:1999, IDT) |
| AS/NZS 1337.6:2007 | Personal eye protection - Prescription eye protectors against low and medium impact |
| AS 4024.1902-2006 | Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Displays |
| AS 4024.1301-2006 | Safety of machinery Risk assessment - Principles of risk assessment |
| AS/NZS 61558.2.15:2001 | Safety of power transformers, power supply units and similar Particular requirements for isolating transformers for the supply of medical locations (IEC 61558-2-15:1999, MOD) |
| AS 4024.1501-2006 | Safety of machinery Design of safety related parts of control systems - General principles for design (Reconfirmed 2014) |
| AS/NZS 1336:1997 | Recommended practices for occupational eye protection |
| AS 4024.1907-2006 | Safety of machinery Displays, controls, actuators and signals - System of auditory and visual danger and information signals |
| AS 4024.1302-2006 | Safety of machinery Risk assessment - Reduction of risks to health and safety from hazardous substances emitted by machinery - Principles and specifications for machinery manufacturers |
| AS 4024.1202-2006 | Safety of machinery General principles - Technical principles |
| AS/NZS 1891.4:2009 | Industrial fall-arrest systems and devices Selection, use and maintenance |
| AS 4024.1704-2006 | Safety of machinery Human body measurements - Anthropometric data |
| AS/NZS 61558.2.8:2001 | Safety of power transformers, power supply units and similar Particular requirements for bell and chime transformers (IEC 61558-2-8:1998, IDT) |
| AS 4024.1603-2006 | Safety of machinery Design of controls, interlocks and guards - Prevention of unexpected start-up (Reconfirmed 2014) |
| AS/NZS 61558.2.17:2001 | Safety of power transformers, power supply units and similar Particular requirements for transformers for switch mode power supplies (IEC 61558-2-17:1997, MOD) |
| AS 3527.2-1990 | Hand-operated screwdrivers and screwdriver bits - Insulated screwdrivers |
| AS/NZS 2210.2:2009 | Occupational protective footwear Test methods (ISO 20344:2004, MOD) |
| AS/NZS 61558.1:2008 | Safety of Power Transformers, Power Supplies, Reactors and Similar Products General requirements and tests (IEC 61558-1 Ed 2, MOD) |
| AS/NZS 1337.4:2004 | Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors) |
| AS/NZS 3190:2009 | Approval and test specification - Residual current devices (current-operated earth-leakage devices) |
| AS 2676.1-1992 | Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings - Vented cells |
| AS 4024.1502-2006 | Safety of machinery Design of safety related parts of control systems - Validation (Reconfirmed 2014) |
| AS/NZS 61241.14:2005 | Electrical apparatus for use in the presence of combustible dust Selection and installation (IEC 61241-14, Ed.1.0(2004) MOD) |
| AS 4024.1701-2006 | Safety of machinery Human body measurements - Basic human body measurements for technological design |
| AS 4741-2010 | Testing of connections to low voltage electricity networks (Reconfirmed 2021) |
| AS/NZS 3017:2007 | Electrical installations - Verification guidelines |
| AS 2676.2-1992 | Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings - Sealed cells |
| AS/NZS 3832:1998 | Electrical installations - Cold-cathode illumination systems |
| AS 4024.1905-2006 | Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for marking |
| AS/NZS 61558.2.5:2003 | Safety of power transformers, power supply units and similar Particular requirements for shaver transformers (IEC 61558-2-5:1997, MOD) |
| AS/NZS 61009.1:2004 | Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBOs) General rules (IEC 61009-1, Ed. 2.1 (2003) MOD) |
| AS/NZS 1270:2002 | Acoustics - Hearing protectors (Reconfirmed 2014) |
| AS/NZS ISO 31000:2009 | Risk management - Principles and guidelines |
| AS 4024.1703-2006 | Safety of machinery Principles for determining the dimensions required for access openings |
| AS 4024.1904-2006 | Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for visual, auditory and tactile signals |
| AS 4024.1802-2006 | Safety of machinery Safety distances and safety gaps - Safety distances to prevent danger zones being reached by the lower limbs |
| AS/NZS 3012:2010 | Electrical installations - Construction and demolition sites |
| AS/NZS 4576:1995 | Guidelines for scaffolding |
| AS 4024.1602-2006 | Safety of machinery Interlocking devices associated with guards - Principles for design and selection |
| AS 4202-1994 | Insulating covers for electrical purposes |
| AS 4024.1702-2006 | Safety of machinery Human body measurements - Principles for determining the dimensions required for openings for whole body access into machinery |
| AS/NZS 2161.4:1999 | Occupational protective gloves Protection against thermal risks (heat and fire) (Reconfirmed 2016) |
| AS/NZS 1801:1997 | Occupational protective helmets |
| AS/NZS 60079.17:2009 | Explosive atmospheres Electrical installations inspection and maintenance (IEC 60079-17, Ed.4.0 (2007) MOD) |
| AS/NZS 60079.14:2009 | Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD) |
| AS/NZS 61558.2.23:2001 | Safety of power transformers, power supply units and similar devices Particular requirements for transformers for construction sites (IEC 61558-2-23:2000, MOD) |
| AS/NZS 1892.3:1996 | Portable ladders Reinforced plastic |
| AS 4024.1906-2006 | Safety of machinery Displays, controls, actuators and signals - Indication, marking and actuation - Requirements for the location and operation of actuators |
| AS/NZS 4804:2001 | Occupational health and safety management systems - General guidelines on principles, systems and supporting techniques (Reconfirmed 2020) |
| AS 4024.1601-2006 | Safety of machinery Design of controls, interlocks and guarding - Guards - General requirements for the design and construction of fixed and movable guards |
| AS 4024.1903-2006 | Safety of machinery Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Control actuators |
| AS 61010.1-2003 | Safety requirements for electrical equipment for measurement, control and laboratory use General requirements (IEC 61010-1:2001, MOD) (Reconfirmed 2016) |
| AS/NZS 3760:2010 | In-service safety inspection and testing of electrical equipment |
| AS/NZS 61558.2.9:2003 | Safety of power transformers, power supply units and similar products Particular requirements for transformers for class III handlamps for tungsten filament lamps (IEC 61558-2-9:2002, MOD) |
| AS/NZS 2381.1:2005 | Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance - General requirements |
| AS/NZS 61558.1:2000 | Safety of power transformers, power supply units and similar General requirements and tests (IEC 61558-1 Ed 1.1, MOD) |
| AS/NZS 61558.2.7:2008 | Safety of power transformers, power supplies, reactors and similar products Particular requirements and tests for transformers and power supplies for toys (Reconfirmed 2020) |
| AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 3007:2013 | Electrical equipment in mines and quarries - Surface installations and associated processing plant |
US$127.59
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.