ASME B32.100 : 2016
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
10-14-2016
Foreword
Acknowledgement
Committee Roster
Correspondence With the B32 Committee
1 Scope
2 General
3 Use of Tables
4 Basis of Tables
5 Tolerances
Nonmandatory Appendix
A - Related Standards
Describes a preferred series of metric thicknesses, widths, and lengths for flat metal products of rectangular cross-section.
DevelopmentNote |
Supersedes and redesignates ASME B32.3M and ASME B32.4M (10/2005)
|
DocumentType |
Standard
|
ISBN |
978-0-7918-7115-7
|
Pages |
21
|
PublisherName |
American Society of Mechanical Engineers
|
Status |
Current
|
Supersedes |
ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
ISO 4019:2001 | Structural steels Cold-formed, welded, structural hollow sections Dimensions and sectional properties |
ISO 16162:2012 | Cold-rolled steel sheet products — Dimensional and shape tolerances |
ISO 4996:2014 | Hot-rolled steel sheet of high yield stress structural quality |
ISO 4960:2007 | Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % |
ISO 1829:1975 | Selection of tolerance zones for general purposes |
ISO 657-11:1980 | Hot-rolled steel sections — Part 11: Sloping flange channel sections (Metric series) — Dimensions and sectional properties |
ISO 657-1:1989 | Hot-rolled steel sections Part 1: Equal-leg angles Dimensions |
ISO 3574:2012 | Cold-reduced carbon steel sheet of commercial and drawing qualities |
ISO 657-18:1980 | Hot-rolled steel sections — Part 18: L sections for shipbuilding (metric series) — Dimensions, sectional properties and tolerances |
ISO 1035-3:1980 | Hot-rolled steel bars — Part 3: Dimensions of flat bars |
ISO 3:1973 | Preferred numbers Series of preferred numbers |
ISO 2938:1974 | Hollow steel bars for machining |
ISO 1035-4:1982 | Hot-rolled steel bars Part 4: Tolerances |
ISO 16163:2012 | Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances |
ISO 3573:2012 | Hot-rolled carbon steel sheet of commercial and drawing qualities |
ISO 4999:2014 | Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities |
ISO 2937:1974 | Plain end seamless steel tubes for mechanical application |
ISO 1052:1982 | Steels for general engineering purposes |
ISO 8457-1:1989 | Steel wire rod Part 1: Dimensions and tolerances |
ISO 7452:2013 | Hot-rolled steel plates — Tolerances on dimensions and shape |
ISO 9364:2011 | Continuous hot-dip 55 % aluminium/zinc alloy-coated steel sheet of commercial, drawing and structural qualities |
ISO 4998:2014 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality |
ISO 5001:2012 | Cold-reduced carbon steel sheet for vitreous enamelling |
ISO 5002:2013 | Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities |
ISO 5950:2012 | Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities |
ISO 4995:2014 | Hot-rolled steel sheet of structural quality |
ISO 17:1973 | Guide to the use of preferred numbers and of series of preferred numbers |
ISO 657-15:1980 | Hot-rolled steel sections — Part 15: Sloping flange beam sections (Metric series) — Dimensions and sectional properties |
ISO 9034:1987 | Hot-rolled structural steel wide flats Tolerances on dimensions and shape |
ISO 1035-1:1980 | Hot-rolled steel bars — Part 1: Dimensions of round bars |
ISO 8458-1:2002 | Steel wire for mechanical springs Part 1: General requirements |
ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
ISO 5252:1991 | Steel tubes — Tolerance systems |
ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
ISO 10384:2012 | Hot-rolled carbon steel sheet as defined by chemical composition |
ISO 15812:2001 | Continuous mill flat rolled products Guidelines for improved ordering communication |
ISO 1035-2:1980 | Hot-rolled steel bars — Part 2: Dimensions of square bars |
ISO 4997:2015 | Cold-reduced carbon steel sheet of structural quality |
ISO 5952:2011 | Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance |
ISO 6932:2014 | Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
ISO 13887:2017 | Steel sheet, cold-reduced, of higher yield strength with improved formability |
ISO 497:1973 | Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers |
ISO 13976:2016 | Hot-rolled steel sheet in coils of structural quality and heavy thickness |
ISO 630:1995 | Structural steels Plates, wide flats, bars, sections and profiles |
ISO 14590:2016 | Cold-reduced steel sheet of high tensile strength and low yield point with improved formability |
ISO 8458-2:2002 | Steel wire for mechanical springs Part 2: Patented cold-drawn non-alloy steel wire |
ISO 657-2:1989 | Hot-rolled steel sections Part 2: Unequal-leg angles Dimensions |
ISO 657-16:1980 | Hot-rolled steel sections Part 16: Sloping flange column sections (metric series) Dimensions and sectional properties |
ISO 3575:2016 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities |
ISO 657-21:1983 | Hot-rolled steel sections Part 21: T-sections with equal depth and flange width Dimensions |
ISO 5951:2013 | Hot-rolled steel sheet of higher yield strength with improved formability |
ISO 5954:2014 | Cold-reduced carbon steel sheet according to hardness requirements |
ISO 657-5:1976 | Hot-rolled steel sections — Part 5: Equal-leg angles and unequal-leg angles — Tolerances for metric and inch series |
ISO 6316:2012 | Hot-rolled steel strip of structural quality |
ISO 16160:2012 | Hot-rolled steel sheet products — Dimensional and shape tolerances |
ISO 5000:2011 | Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities |
ISO 14788:2011 | Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet |
ISO 6317:2008 | Hot-rolled carbon steel strip of commercial and drawing qualities |
ISO 1127:1992 | Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.