API 941 : 2016
|
STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS |
API 7NRV : 2006
|
SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
API 53 : 2012
|
BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
API 2SC : 2010
|
MANUFACTURE OF STRUCTURAL STEEL CASTINGS FOR PRIMARY OFFSHORE APPLICATIONS |
EN ISO 13628-15:2011
|
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011) |
API TR 17TR7 : 2017
|
VERIFICATION AND VALIDATION OF SUBSEA CONNECTORS |
API 945 : 2003 : R2008
|
AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS |
API RP 16Q : 2017
|
DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS |
NFPA 52 : 2016
|
VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
API 613:2003
|
SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
API 677 : 2006 : R2010
|
GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
API 677 :2006
|
GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
EN ISO 28921-1:2017
|
Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
API 92U : 2008 : R2013
|
UNDERBALANCED DRILLING OPERATIONS |
EN ISO 14693:2003
|
Petroleum and natural gas industries - Drilling and well-servicing equipment (ISO 14693:2003) |
NACE SP 02 86 : 2007
|
ELECTRICAL ISOLATION OF CATHODICALLY PROTECTED PIPELINES |
API 611 : 2008
|
GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 17V : 2015
|
RECOMMENDED PRACTICE FOR ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR SUBSEA APPLICATIONS |
API 582 : 2016
|
WELDING GUIDELINES FOR THE CHEMICAL, OIL, AND GAS INDUSTRIES |
API 677 : 2006 : R2016
|
GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
NACE RP 02 96 : 2004
|
GUIDELINES FOR DETECTION, REPAIR, AND MITIGATION OF CRACKING OF EXISTING PETROLEUM REFINERY PRESSURE VESSELS IN WET H[2]S ENVIRONMENTS |
API 11V1 :1995
|
SPECIFICATION FOR GAS LIFT EQUIPMENT |
API 6A : 2010
|
SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
API 572 : 2016
|
INSPECTION PRACTICES FOR PRESSURE VESSELS |
EN ISO 13709:2009
|
Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
EN ISO 10423:2009
|
Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009) |
EN ISO 13533:2001/AC:2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
NFPA 560 : 2007
|
STORAGE, HANDLING, AND USE OF ETHYLENE OXIDE FOR STERILIZATION AND FUMIGATION |
EN ISO 10432:2004
|
Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
ASHRAE HDBK REFRIGERATION : 2014
|
ASHRAE HANDBOOK - REFRIGERATION |
PIP VESAC001 : 2016
|
AIR-COOLED HEAT EXCHANGER SPECIFICATION (SUPPLEMENT TO API STD 661, 7TH EDITION) |
API 594 : 2017
|
CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING |
NACE SP 04 72 : 2015
|
METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
API 16A CHINESE : 2004
|
SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
API 11V1 : 1995 : R2008
|
SPECIFICATION FOR GAS LIFT EQUIPMENT |
API 6A REDLINE : 2010
|
SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
EN ISO 21049:2004
|
Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004) |
API RP 2201 : 2003
|
SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
EN ISO 17781:2017
|
Petroleum, petrochemical and natural gas industries - Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels (ISO 17781:2017) |
API 611 : 2008 : R2014
|
GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 7NRV CHINESE : 2006
|
SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
API 945:2003
|
AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS |
CSA C22.2 No. 60335-2-40 : 2017
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS |
API TR 17TR8 : 2018
|
HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
EN ISO 10418:2003/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - ANALYSIS, DESIGN, INSTALLATION AND TESTING OF BASIC SURFACE PROCESS SAFETY SYSTEMS |
ASME PTB 2 : 2009
|
GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
API TR 1PER15K-1 : 2013
|
PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
API 7NRV : 2006 : R2012
|
SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
API 14A : 2015
|
SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
API 576 CHINESE : 2009
|
INSPECTION OF PRESSURE-RELIEVING DEVICES |
EN ISO 15547-1:2005
|
Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 1: Plate-and-frame heat exchangers (ISO 15547-1:2005) |
NFPA 99 : 2018
|
HEALTH CARE FACILITIES CODE |
API 92U : 2008 : INC : ADD 1 : 2015 : R201300
|
UNDERBALANCED DRILLING OPERATIONS |
API TR 17TR12 : 2015
|
CONSIDERATION OF EXTERNAL PRESSURE IN THE DESIGN AND PRESSURE RATING OF SUBSEA EQUIPMENT |
EN ISO 13710:2004
|
Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004) |
EN ISO 13625:2002
|
Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002) |
API TR 17TR4 : 2016
|
SUBSEA EQUIPMENT PRESSURE RATINGS |
API 92U : 2008
|
UNDERBALANCED DRILLING OPERATIONS |
API 2201 : 2003 : R2010
|
SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
NFPA 99 HDBK : 2018
|
HEALTH CARE FACILITIES CODE HANDBOOK |
API 546 : 2008
|
BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
API RP 16Q RUSSIAN : 2017
|
DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS |
API 560 : 2016
|
FIRED HEATERS FOR GENERAL REFINERY SERVICE |
NFPA 58 HDBK : 2017
|
LP-GAS CODE HANDBOOK |
API SPEC 11D1 : 2015
|
PACKERS AND BRIDGE PLUGS |
DIN EN ISO 28921-1:2017-05
|
Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) |
ASTM F 682 : 1982 : REV A : R2004
|
Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings |
BS PD5500(2015) : 2015
|
SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
ISO 14693:2003
|
Petroleum and natural gas industries — Drilling and well-servicing equipment |
ASTM F 1201 : 1988 : R2010
|
Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
ASTM F 1201 : 1988 : R2004
|
Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
ASTM F 1200 : 1988 : R2004
|
Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
EN ISO 23251:2007/A1:2008
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
ISO 18139:2017
|
Ships and marine technology — Globe valves for use in low temperature applications — Design and testing requirements |
ASTM A 381 : 1996 : R2001
|
Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems |
BS EN ISO 17781:2017
|
Petroleum, petrochemical and natural gas industries. Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels |
ASTM E 1344 : 1990 : R2006
|
Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities (Withdrawn 2009) |
ASTM A 1005/A1005M : 2000 : EDT 1
|
Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded |
BS EN ISO 23251 : 2007
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
ASTM A 1005/A1005M : 2000 : R2004
|
Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded |
CSA N285.7 : 2015
|
Periodic inspection of CANDU nuclear power plant balance of plant systems and components
|
ASTM B 546 : 2004
|
Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
ISO 13709:2009
|
Centrifugal pumps for petroleum, petrochemical and natural gas industries |
API SPEC 19AC : 2016
|
SPECIFICATION FOR COMPLETION ACCESSORIES |
CAN/CSA-C22.2 NO. 60335-2-34:17
|
Household and similar electrical appliances ? Safety ? Part 2-34: Particular requirements for motor-compressors (Binational standard with UL 60335-2-34) |
ASME PV CODE 7 : 2017
|
BPVC Section VII-BOILER AND PRESSURE VESSEL CODE - RECOMMENDED GUIDELINES FOR THE CARE OF POWER BOILERS |
BS EN ISO 13709:2003
|
CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
BS EN ISO 13625:2002
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - MARINE DRILLING RISER COUPLINGS |
ASTM E 1117 : 1997 : R2006
|
Standard Practice for Design of Fuel-Alcohol Manufacturing Facilities (Withdrawn 2009) |
ASTM F 1201 : 1988 : R2016
|
Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
ISO 21049:2004
|
Pumps Shaft sealing systems for centrifugal and rotary pumps |
ASTM E 1117 : 1997
|
Standard Practice for Design of Fuel-Alcohol Manufacturing Facilities |
ASTM A 358/A358M : 2015 : REDLINE
|
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
ASTM A 1005/A1005M : 2000 : R2010
|
Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded (Withdrawn 2014) |
ASTM F 682 : 1982 : REV A : R2014
|
Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings |
API RP 17R : 2015
|
RECOMMENDED PRACTICE FOR FLOWLINE CONNECTORS AND JUMPERS |
BS EN ISO 10423:2009 (published 2010-07)
|
Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM |
ASTM F 1200 : 1988 : R1998
|
Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
BS EN ISO 15547-1:2005
|
Petroleum, petrochemical and natural gas industries. Plate-type heat exchangers Plate-and-frame heat exchangers |
ASTM E 1344 : 1990 : R1997 : EDT 1
|
Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities |
ISO 13533:2001
|
Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
PD 5500:2003
|
SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
ISO 28921-1:2013
|
Industrial valves Isolating valves for low-temperature applications Part 1: Design, manufacturing and production testing |
ASTM E 2956 : 2014
|
Standard Guide for Monitoring the Neutron Exposure of LWR Reactor Pressure Vessels |
ASTM B 546 : 2004 : R2014
|
Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
ASTM C 1062 : 2000 : R2014
|
Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities |
ASTM E 1068 : 1985 : R2009
|
Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid (Withdrawn 2018) |
ISO 13628-15:2011
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 15: Subsea structures and manifolds |
ASTM A 381 : 1996 : R2005
|
Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems |
BS ISO 18139:2017
|
Ships and marine technology. Globe valves for use in low temperature applications. Design and testing requirements |
ASTM E 1068 : 1985 : R2003
|
Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid |
ASTM B 546 : 2004 : R2009
|
Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
B620-14 (R2019)
|
Highway tanks and TC portable tanks for the transportation of dangerous goods |
ISO 13625:2002
|
Petroleum and natural gas industries — Drilling and production equipment — Marine drilling riser couplings |
SAE J 2579 : 2013
|
STANDARD FOR FUEL SYSTEMS IN FUEL CELL AND OTHER HYDROGEN VEHICLES |
ASTM F 682 : 1982 : REV A : R2008
|
Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings |
ISO 23251:2006
|
Petroleum, petrochemical and natural gas industries Pressure-relieving and depressuring systems |
ASTM F 1200 : 1988 : R2010
|
Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
BS EN ISO 14693:2003
|
Petroleum and natural gas industries. Drilling and well-servicing equipment |
BS EN ISO 13533:2002
|
Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment |
ASTM F 1200 : 1988 : R2016
|
Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
ASTM B 363 : 2014 : REDLINE
|
Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings |
ASTM A 381 : 1996 : R2012
|
Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems |
ISO 10418:2003
|
Petroleum and natural gas industries Offshore production installations Analysis, design, installation and testing of basic surface process safety systems |
ASTM B 361 : 2016 : REDLINE
|
Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings |
ASME PCC 2 : 2015
|
REPAIR OF PRESSURE EQUIPMENT AND PIPING |
BS PD5500(2006) : 2006
|
SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
I.S. EN ISO 28921-1:2017
|
INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING (ISO 28921-1:2013) |
ISO 10423:2009
|
Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
ISO 10432:2004
|
Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
ASTM A 381 : 1996
|
Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems |
BS EN ISO 13628-15:2011 (published 2011-09)
|
Petroleum and natural gas industries. Design and operation of subsea production systems Subsea structures and manifolds |
BS EN ISO 10418:2003
|
Petroleum and natural gas industries. Offshore production Installations. Analysis, design, installation and testing of basic surface process safety systems |
BS EN ISO 21049:2004
|
PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
BS EN ISO 28921-1:2017
|
Industrial valves. Isolating valves for low-temperature applications Design, manufacturing and production testing |
ASTM E 1068 : 1985 : R1996 : EDT 1
|
Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid |
ASTM F 682 : 1982 : REV A : R1998
|
Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings |
NACE RP 04 72 : 2005
|
METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
BS EN ISO 10432:2004 (published 2005-01)
|
Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment |
ASTM F 1201 : 1988 : R1998
|
Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
B622-14 (R2019)
|
Selection and use of highway tanks, TC portable tanks, and ton containers for the transportation of dangerous goods, Class 2 |
ISO 15547-1:2005
|
Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 1: Plate-and-frame heat exchangers |
UL 60335-2-40 : 2
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS |
NEMA SG 4:2009(R2013)
|
ALTERNATING CURRENT HIGH-VOLTAGE CIRCUIT BREAKERS |
ASTM C 1062 : 2000 : R2008
|
Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities |
ASTM A 312/A312M : 2017-03
|
SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
ASTM C 1062 : 2000
|
Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities |
CSA B51 : 2014
|
BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |