• There are no items in your cart

ASNT CP 189 : 2016

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

QUALIFICATION AND CERTIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
Superseded date

03-03-2021

Published date

11-23-2012

Abstract
Foreword
ASNT Standard for Qualification and Certification of
Nondestructive Testing Personnel
1 Scope
2 Definitions
3 Levels of Qualification
4 Qualification Requirements
5 Qualification and Certification
6 Examinations
7 Expiration, Suspension, Revocation and Reinstatement
    of Employer Certifications
8 Employer Recertification
9 Records
10 Referenced Publications
Tables
Table 1: General Examination
Table 2: Specific Examination
Appendices
Appendix A - Initial Training and Experience Requirements
             for Level I and Level II
Appendix B - Training Outlines
Training Outlines
Acoustic Emission Testing Method
    Recommended Training for Level I Acoustic Emission
    Testing
       Basic Acoustic Emission Physics Course
       Acoustic Emission Technique Course
    Recommended Training for Level II Acoustic Emission
    Testing
       Acoustic Emission Physics Course
       Acoustic Emission Technique Course
    Recommended Training References
Electromagnetic Testing Method
    Recommended Training for Level I Electromagnetic
    Testing
       Basic Electromagnetic Physics Course
       Electromagnetic Technique Course
    Recommended Training for Level II Electromagnetic
    Testing
       Electromagnetic Evaluation Course
    Recommended Training References
Leak Testing Method
    Recommended Training for Level I Leak Testing
       Fundamentals in Leak Testing Course
       Safety in Leak Testing Course
       Leak Testing Methods Course
    Recommended Training for Level II Leak Testing
       Principles of Leak Testing Course
       Pressure and Vacuum Technology Course
       Leak Test Selection Course
    Recommended Training References
Liquid Penetrant Testing Method
    Recommended Training for Level I Liquid Penetrant
    Testing
    Recommended Training for Level II Liquid Penetrant
    Testing
    Recommended Training References
Magnetic Particle Testing Method
    Recommended Training for Level I Magnetic Particle
    Testing
    Recommended Training for Level II magnetic Particle
    Testing
    Recommended Training References
Neutron Radiographic Testing Method
    Recommended Training for Level I Neutron Radiographic
    Testing
       Neutron Radiographic Equipment Operating and
       Emergency Instructions Course
       Basic Neutron Radiographic Physics Course
       Basic Neutron Radiographic Technique Course
    Recommended Training for Level II Neutron
    Radiographic Testing
       Neutron Radiographic Physics Course
       Neutron Radiographic Technique Course
    Recommended Training References
Radiographic Testing Method
    Recommended Training for Level I Radiographic Testing
       Radiographic Equipment Operating and Emergency
       Instructions Course
       Basic Radiographic Physics Course
       Radiographic Technique Course
    Recommended Training for Level II Radiographic
    Testing
       Film Quality and Manufacturing Processes Course
       Radiographic Evaluation and Interpretation
       Course
    Recommended Training References
Ultrasonic Testing Method
    Recommended Training for Level I Ultrasonic Testing
       Basic Ultrasonic Course
       Ultrasonic Technique Course
    Recommended Training for Level II Ultrasonic Testing
       Basic Ultrasonic Course
       Ultrasonic Technique Course
    Recommended Training for Level II Ultrasonic Testing
       Ultrasonic Evaluation Course
    Recommended Training References
Visual Testing Method
    Recommended Training for Level I Visual Testing
    Recommended Training for Level II Visual Testing
    Recommended Training References

Gives the minimum requirements for the qualification and certification of nondestructive testing (NDT) and predictive maintenance (PdM) personnel, including the minimum training, education, and experience requirements, as well as criteria for documenting qualifications and certification.

DevelopmentNote
Not available separately, Packaged with ASNT CP 105 (2016). (05/2016)
DocumentType
Standard
PublisherName
American Society for Non-Destructive Testing
Status
Superseded
SupersededBy

ASTM E 1219 : 2016 : REDLINE Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
ASTM E 273 : 2015 : REDLINE Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
API 934-E : 2018 RECOMMENDED PRACTICE FOR MATERIALS AND FABRICATION OF 1[1/4]CR-[1/2]MO STEEL PRESSURE VESSELS FOR SERVICE ABOVE 825 DEGREES F (440 DEGREES C)
ASTM E 2373/E2373M : 2014 : REDLINE Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
BS ISO 11484:2009 Steel products. Employers qualification system for non-destructive testing (NDT) personnel
ASTM E 2700 : 2014 : REDLINE Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays
MIL-DTL-46100 Revision E:2008 ARMOR PLATE, STEEL, WROUGHT, HIGH-HARDNESS
ASTM E 1417/E1417M : 2016 : REDLINE Standard Practice for Liquid Penetrant Testing
ASTM E 1955 : 2004 : R2014 Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM <astmref rid="a00002"/> Reference Radiographs
API 577 : 2013 WELDING PROCESSES, INSPECTION, AND METALLURGY
ASTM E 498 : 1995 : R2000 Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
ASTM E 1118 : 2005 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
ASTM E 703 : 2014 : REDLINE Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals
SAE AS 6081 : 2012 FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS: AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION - DISTRIBUTORS
ASTM E 1571 : 2011 : R2016 : EDT 1 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope
ASTM E 498 : 1995 : R2006 Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
ASTM E 1030/E1030M : 2015 : REDLINE Standard Practice for Radiographic Examination of Metallic Castings
ASTM E 3045 : 2016 Standard Practice for Crack Detection Using Vibroacoustic Thermography
ASTM E 2984/E2984M : 2014 Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization
ASTM E 1030 : 2005 Standard Test Method for Radiographic Examination of Metallic Castings
ASTM E 1955 : 2004 : R2009 Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs
ASTM E 1066 : 1995 : R2000 Standard Test Method for Ammonia Colorimetric Leak Testing
ASTM E 494 : 2015 : REDLINE Standard Practice for Measuring Ultrasonic Velocity in Materials
ASTM E 1444 : 2005 Standard Practice for Magnetic Particle Testing
API 575 : 2014 INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS
ASTM E 2661/E2661M : 2015 : REDLINE Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications
ASTM E 1495/E1495M : 2017 : REDLINE Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints
ASTM E 1817 : 2008 Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)
ASTM E 1603/E1603M : 2011 : R2017 Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
ASTM E 2581 : 2014 : REDLINE Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications
ASTM E 1312 : 2009 : R2013 : EDT 1 Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature
NFPA 1901:2016 AUTOMOTIVE FIRE APPARATUS
ASME PTB 2 : 2009 GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY
NACE SP 03 13 : 2013 GUIDED WAVE TECHNOLOGY FOR PIPING APPLICATIONS
ASTM E 1209 : 2010 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process
MIL-DTL-32332 Base Document:2009 ARMOR PLATE, STEEL, WROUGHT, ULTRA-HIGH-HARDNESS
NFPA 1914 : 2002 TESTING FIRE DEPARTMENT AERIAL DEVICES
ASTM E 1208 : 2016 : REDLINE Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process
ASTM C 1331 : 2018 : REDLINE Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
ASTM E 2907/E2907M : 2013 Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing
ASTM E 2928/E2928M : 2017 : REDLINE Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique
ASTM E 2024 : 2005 Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
SAE AMS I 83387 : 2016 INSPECTION PROCESS, MAGNETIC RUBBER
ASTM E 569/E569M : 2013 : REDLINE Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
ASTM E 751/E751M : 2017 : REDLINE Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding
ASTM E 1931 : 2016 : REDLINE Standard Guide for Non-computed X-Ray Compton Scatter Tomography
ASTM E 1000 : 2016 : REDLINE Standard Guide for Radioscopy
ASTM E 1030 : 2005 : R2011 Standard Test Method for Radiographic Examination of Metallic Castings
ASTM E 1255 : 2016 : REDLINE Standard Practice for Radioscopy
ASTM E 1496 : 2005 : R2010 Standard Test Method for Neutron Radiographic Dimensional Measurements (Withdrawn 2012)
ASTM E 1418 : 2016 : REDLINE Standard Practice for Visible Penetrant Testing Using the Water-Washable Process
ASTM E 1359 : 2017 : REDLINE Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies
ASTM E 2598 : 2007 Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers
ASTM E 749/E749M : 2017 : REDLINE Standard Practice for Acoustic Emission Monitoring During Continuous Welding
ASTM E 2479 : 2016 : REDLINE Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L<inf>CR</inf>) Waves
ASTM E 1496 : 2005 Standard Test Method for Neutron Radiographic Dimensional Measurements
ASTM E 1210 : 2016 : REDLINE Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process
ASTM E 3024/E3024M : 2016 Standard Practice for Magnetic Particle Testing for General Industry
ASTM E 498/E498M : 2011 : R2017 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
ISO/TS 11774:2011 Non-destructive testing — Performance-based qualification
ASTM E 543 : 2015 : REDLINE Standard Specification for Agencies Performing Nondestructive Testing
ASTM E 1888/E1888M : 2017 : REDLINE Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores
ASME PV CODE 1 : 2017 BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS
ASME PCC 2 : 2015 REPAIR OF PRESSURE EQUIPMENT AND PIPING
ASME PV CODE 11 : 2017 BOILER AND PRESSURE VESSEL CODE - RULES FOR INSERVICE INSPECTION OF NUCLEAR POWER PLANT COMPONENTS
ASTM E 588 : 2003 : R2009 Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method
MIL-HDBK-1823 Revision A:2009 NONDESTRUCTIVE EVALUATION SYSTEM, RELIABILITY ASSESSMENT
ASTM E 588 : 2003 Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method
ASTM E 214 : 2005 Standard Practice for Immersed Ultrasonic Testing by the Reflection Method Using Pulsed Longitudinal Waves (Withdrawn 2007)
ASTM E 690 : 2015 : REDLINE Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes
ASTM E 2983 : 2014 Standard Guide for Application of Acoustic Emission for Structural Health Monitoring
ASTM E 1220 : 2016 : REDLINE Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process
ASTM E 1033 : 2013 : REDLINE Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature
ASTM E 1930/E1930M : 2017 : REDLINE Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission
API 570 REDLINE : 2009 PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS
ASTM E 1118/E1118M : 2016 : REDLINE Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
ASTM E 1817 : 2008 : R2014 Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)
ASTM E 499 : 1995 : R2000 Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
ISO 11484:2009 Steel products — Employer's qualification system for non-destructive testing (NDT) personnel
ASTM E 2033 : 2017 : REDLINE Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method)
API 5C8 : 2017 CARE, MAINTENANCE, AND INSPECTION OF COILED TUBING
ASTM E 797/E797M : 2015 : REDLINE Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
ASTM E 1962 : 2014 : REDLINE Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques
B339-14 Cylinders, spheres, and tubes for the transportation of dangerous goods
ASTM E 709 : 2015 : REDLINE Standard Guide for Magnetic Particle Testing
ASTM E 2985/E2985M : 2014 Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy
ASTM E 2981 : 2015 Standard Guide for Nondestructive Testing of the Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications
ASTM E 1067/E1067M : 2018 : REDLINE Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
ASTM E 493/E493M : 2011 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM E 2580 : 2017 : REDLINE Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
ASTM E 2191/E2191M : 2016 : REDLINE Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission
ASTM E 588 : 2003 : R2014 Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method
ASTM E 1742/E1742M : 2018 : REDLINE Standard Practice for Radiographic Examination
ASTM E 498/E498M : 2011 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode <a href="#fn00002"></a>
ASTM E 2884 : 2017 : REDLINE Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays
ASTM E 1961 : 2016 : REDLINE Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units
ASTM E 1211/E1211M : 2017 : REDLINE Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors
ASTM E 1161 : 2009 : R2014 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components
NASA STD 8719.9 : 2015 LIFTING STANDARD
NASA STD 5003 : 0 FRACTURE CONTROL REQUIREMENTS FOR PAYLOADS USING THE SPACE SHUTTLE
ASTM E 215 : 2016 : REDLINE Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube
ASTM E 499/E499M : 2011 : R2017 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode<rangeref></rangeref >
ASTM E 114 : 2015 : REDLINE Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
ASTM E 1312 : 2009 Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature
ASTM E 309 : 2016 : REDLINE Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation
ASTM E 587 : 2015 : REDLINE Standard Practice for Ultrasonic Angle-Beam Contact Testing
ASTM E 1212 : 2017 : REDLINE Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies
API RP 2611 : 2011 TERMINAL PIPING INSPECTION - INSPECTION OF IN-SERVICE TERMINAL PIPING SYSTEMS
ASTM E 1603/E1603M : 2011 Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
AWS D14.4/D14.4M : 2012 SPECIFICATION FOR THE DESIGN OF WELDED JOINTS IN MACHINERY AND EQUIPMENT
09/30179492 DC : 0 BS ISO 11774 - NON-DESTRUCTIVE TESTING - PERFORMANCE BASED QUALIFICATION
AWS C7.3 : 2016 PROCESS SPECIFICATION FOR ELECTRON BEAM WELDING
ASTM E 1066 : 1995 : R2006 Standard Test Method for Ammonia Colorimetric Leak Testing
ASTM E 427 : 1995 : R2006 Standard Practice for Testing for Leaks Using the Halogen Leak Detector(Alkali-Ion Diode) (Withdrawn 2013)
ASTM E 1571 : 2011 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope
ASTM E 3100 : 2017 Standard Guide for Acoustic Emission Examination of Concrete Structures
ASTM E 493 : 2006 Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM E 2076/E2076M : 2015 : REDLINE Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission
API 573 : 2013 INSPECTION OF FIRED BOILERS AND HEATERS
API 620 CHINESE : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
API 510 CHINESE : 2014 PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION
API 570 CHINESE : 2009 PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS
API 620 : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
ASTM E 664/E664M : 2015 : REDLINE Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method
ASTM E 426 : 2016 : REDLINE Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys
API 620 REDLINE : 2008 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
ASTM E 1774 : 2017 : REDLINE Standard Guide for Electromagnetic Acoustic Transducers (EMATs)
ASTM E 2076 : 2005 Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission
ASTM E 2338 : 2017 : REDLINE Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards
ASTM E 3052 : 2016 Standard Practice for Examination of Carbon Steel Welds Using Eddy Current Array
ASTM E 2375 : 2016 : REDLINE Standard Practice for Ultrasonic Testing of Wrought Products
ASTM E 1736 : 2015 : REDLINE Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels
ASTM E 493/E493M : 2011 : R2017 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
API 1615 : 2011 INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS
API 650 : 2013+ADD 3 : 2018 WELDED TANKS FOR OIL STORAGE
API 650 CHINESE : 2013 WELDED TANKS FOR OIL STORAGE
ASTM E 571 : 2012 : REDLINE Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
ASTM E 2863 : 2017 : REDLINE Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization
AISC 360 : 2016 SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS
API 570 : 2016 PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS
ASTM E 499/E499M : 2011 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode <a href="#fn00002"></a>
ASTM E 2096/E2096M : 2016 : REDLINE Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing
ASTM E 2906/E2906M : 2013 Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles
ASTM E 1955 : 2004 Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs
ASTM E 1001 : 2016 : REDLINE Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves
ASTM E 499 : 1995 : R2006 Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
API 510 : 2014 PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION
ASTM E 2261/E2261M : 2017 : REDLINE Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique
API 577 CHINESE : 2013 WELDING PROCESSES, INSPECTION AND METALLURGY
ASTM E 1004 : 2017 : REDLINE Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method
ASTM E 1161 : 2009 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components
SAE AS 6171/5 : 2016 TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY RADIOLOGICAL TEST METHODS
ASTM E 2930 : 2013 Standard Practice for Pressure Decay Leak Test Method
API TR 17TR8 : 2018 HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
ASTM E 1570 : 2011 : REDLINE PRACTICE FOR COMPUTED TOMOGRAPHIC (CT) EXAMINATION
ASTM E 2598/E2598M : 2013 : REDLINE Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers
ASTM E 2478 : 2011 : R2016 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission
ASTM E 2698 : 2010 Standard Practice for Radiological Examination Using Digital Detector Arrays
ASTM E 2905/E2905M : 2013 : REDLINE PRACTICE FOR EXAMINATION OF MILL AND KILN GIRTH GEAR TEETH - ELECTROMAGNETIC METHODS
ASTM E 2982 : 2014 Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications
ASTM E 1603 : 1999 Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
ASTM E 427 : 1995 : R2000 Standard Practice for Testing for Leaks Using the Halogen Leak Detector (Alkali-Ion Diode)
ASTM E 1814 : 2014 : REDLINE Standard Practice for Computed Tomographic (CT) Examination of Castings
API 575 CHINESE : 2014 INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS
API 1615 REDLINE : 2011 INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS
API 650 : 2013 WELDED TANKS FOR OIL STORAGE
ASTM C 1332 : 2018 : REDLINE Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
ASTM E 1139/E1139M : 2017 : REDLINE Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries
ASTM E 1606 : 2015 : REDLINE Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes
ASTM E 2478 : 2011 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.