ASTM A 576 : 2017

Name: ASTM A 576 : 2017
Brand: ASTM
Price: 75.00 USD

Superseded

View Superseded by

Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality

Available format(s)

Hardcopy , PDF

Superseded date

11-09-2023

Language(s)

English

Published date

12-14-2017

Publisher

American Society for Testing and Materials

1.1This specification covers hot-wrought special quality carbon steel bars. Special quality bar applications include forging, heat treating, cold drawing, machining, and many structural uses. A guide for the selection of steel bars is contained in Practice A400.

1.2The bars shall be furnished in the grades specified in Table 1. Sections and sizes of bar steel available are covered in Specification A29/A29M. Hot-wrought special quality carbon steel bars are produced in cut lengths and coils; the manufacturer should be consulted regarding sections and sizes available in coils, produced to a chemical composition.

Rephosphorized and Resulfurized Carbon Steel^E,^G,^H
Designation	Grade	Carbon	Manganese	Phosphorus	Sulfur	Lead
G12110	1211	0.13 max	0.60–0.90	0.07–0.12	0.10–0.15	...
G12120	1212	0.13 max	0.70–1.00	0.07–0.12	0.16–0.23	...
G12130	1213	0.13 max	0.70–1.00	0.07–0.12	0.24–0.33	...
G12150	1215	0.09 max	0.75–1.05	0.04–0.09	0.26–0.35	...
...	12L14	0.15 max	0.85–1.15	0.04–0.09	0.26–0.35	0.15–0.35

(A)New designations established in accordance with Practice E527 and SAE J 1086.

(B)Maximum unless otherwise indicated.

(C)When silicon is required, the following ranges and limits are commonly specified: 0.10 %, max, 0.10 to 0.20 %, 0.15 to 0.35 %, or 0.20 to 0.40 %.

(D)Copper can be specified when required as 0.20 % minimum.

(E)When lead is required as an added element to a standard steel, a range of 0.15 to 0.35 % incl is specified. Such a steel is identified by inserting the letter “L” between the second and third numerals of the grade designation, for example, 10 L 45. A cast or heat analysis is not determinable when lead is added to the ladle stream.

(F)When boron treatment is specified for killed steels, the steels can be expected to contain 0.0005 to 0.003 % boron.

(G)The elements bismuth, calcium, selenium, or tellurium may be added as agreed between purchaser and supplier.

(H)It is not common practice to produce these steels to specified limits for silicon because of its adverse effect on machinability.

1.3Merchant quality hot-wrought carbon steel bars are covered in Specification A575.

1.4Some end uses may require superior surface quality, or special chemical restrictions, metallurgical characteristics, heat treatment, or surface finishes which the purchaser may obtain by designating one or more of the available Supplementary Requirements.

1.5The values stated in inch-pound units are to be regarded as standard.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	A 01
DocumentType	Standard
Pages	6
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM A 576 : 2023
Supersedes	ASTM A 576 : 1990 : REV B : R2012

ASTM A 920/A920M : 2014 : R2019	Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
ASTM A 108 : 2018	Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
ASTM A 921/A921M : 1993 : R2022	Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
ASTM A 909/A909M : 2006 : R2021	Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
ASTM A 29/A29M : 2023	Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
ASTM F 721 : 2018 : R2022	Standard Specification for Gauge Piping Assemblies
ASTM C 361M : 2022	Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)
ASTM C 361 : 2022	Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
ASTM F 1387 : 2023	Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
ASTM A 575 : 2020	Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
ASTM A 689 : 1997 : R2018	Standard Specification for Carbon and Alloy Steel Bars for Springs

ASTM A 575 : 1996	Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
ASTM E 45 : 1997 : EDT 2	Standard Test Methods for Determining the Inclusion Content of Steel
ASTM E 527 : 2023	Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ASTM E 527 : 2016	Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ASTM A 29/A29M : 2023	Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought