ASTM A 700 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
Available format(s)
Hardcopy , PDF
Superseded date
11-12-2019
Language(s)
English
Published date
11-01-2014
CONTAINED IN VOL. 01.05, 2017 Defines the packaging, marking, and loading of steel products for shipment. Assuming proper handling in transit, this guide is intended to assist shippers in packaging and loading steel products to arrive at their destination safely and in good condition.
1.1This guide covers the packaging, marking, and loading of steel products for shipment. Assuming proper handling in transit, this guide is intended to assist shippers in packaging and loading steel products to arrive at their destination safely and in good condition. It is also intended that this guide may be used for attaining uniformity, simplicity, sufficiency, and economy in the shipment of steel products.
1.2This guide applies to semi-finished steel products, bars, structural shapes and sheet piling, rods, wire and wire products, tubular products, plates, sheets, and strips, tin mill products, and castings.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
A 01
|
| DevelopmentNote |
Supersedes MIL STD 163 (C). (02/2008)
|
| DocumentType |
Guide
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM A 135 : 2005 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
| ASTM A 392 : 2011 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
| MIL-S-6758 Revision B:1993 | STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
| RR-W-410 Revision H:2015 | WIRE ROPE AND STRAND |
| ASTM A 749/A749M : 2014 : REDLINE | Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for |
| ASTM A 853 : 2004 | Standard Specification for Steel Wire, Carbon, for General Use |
| MIL-S-23284 Revision A:1990 | STEEL FORGINGS, CARBON AND ALLOY, FOR SHAFTS, SLEEVES, COUPLINGS AND STOCKS (RUDDERS AND DIVING PLANES) |
| ASTM A 623M : 2016 : REDLINE | Standard Specification for Tin Mill Products, General Requirements [Metric] |
| ASTM A 752 : 2004 : R2010 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel (Withdrawn 2011) |
| ASTM A 417 : 1993 : R1998 | Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units |
| MIL-S-8844 Revision D:1987 | STEEL BAR, REFORGING STOCK AND MECHANICAL TUBING LOW ALLOY PREMIUM QUALITY |
| ASTM A 641/A641M : 2009 : REV A | Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire |
| AASHTO M 54M/M 54 : 2007 : R2012 | SPECIFICATION FOR WELDED DEFORMED STEEL BAR MATS FOR CONCRETE REINFORCEMENT |
| AASHTO M 329M/M 329 : 2011 | SPECIFICATION FOR STAINLESS CLAD DEFORMED AND PLAIN ROUND STEEL BARS FOR CONCRETE REINFORCEMENT |
| ASTM A 876/A876M : 1998 | Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types |
| AASHTO M 329M/M 329 : 2011 : R2015 | SPECIFICATION FOR STAINLESS CLAD DEFORMED AND PLAIN ROUND STEEL BARS FOR CONCRETE REINFORCEMENT |
| AASHTO M 221M/M 221 : 2009 : R2013 | SPECIFICATION FOR STEEL WELDED WIRE REINFORCEMENT, DEFORMED, FOR CONCRETE |
| ASTM A 1085 : 2013 | Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS) |
| ASTM A 500/A500M : 2018 : REDLINE | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ASTM A 500 : 2003 : REV A | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ASTM A 135/A135M : 2009 : R2014 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
| ASTM A 713 : 2004 : R2017 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
| ASTM A 230/A230M : 2005 | Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality |
| ASTM A 905 : 2004 : R2010 | Standard Specification for Steel Wire, Pressure Vessel Winding |
| ASTM A 809 : 2008 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire |
| ASTM A 121 : 2013 | Standard Specification for Metallic-Coated Carbon Steel Barbed Wire |
| ASTM A 714 : 1999 | Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe |
| ASTM F 1183 : 1996 : R2002 | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| ASTM A 726M : 1992 | Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semi-Processed Types [Metric] (Withdrawn 1998) |
| ASTM A 752M : 2004 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] |
| ASTM A 1085/A1085M : 2015 : REDLINE | Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS) |
| ASTM A 1069/A1069M : 2016 : REDLINE | Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes |
| ASTM A 600 : 1992 : REV A : R2010 | Standard Specification for Tool Steel High Speed |
| ASTM A 1 : 2000 : R2010 | Standard Specification for Carbon Steel Tee Rails |
| ASTM A 3 : 2001 : R2006 | Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated) |
| ASTM A 996/A996M : 2016 : REDLINE | Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement |
| ASTM A 1028 : 2003 : R2015 | Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils (Withdrawn 2021) |
| ASTM A 840/A840M : 2000 | Standard Specification for Fully Processed Magnetic Lamination Steel |
| ASTM A 854/A854M : 2008 : R2017 | Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire |
| ANSI B11.18 : 2006 | SAFETY REQUIREMENTS FOR MACHINES PROCESSING OR SLITTING COILED OR NON-COILED METAL |
| ASTM A 726 : 2005 | Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types |
| ASTM A 682/A682M : 2005 | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For (Withdrawn 2009) |
| ASTM A 546 : 1982 : EDT 1 | Specification for Steel Wire, Medium-High-Carbon, Cold-Heading Quality, for Hexagon-Head Bolts<med> |
| ASTM A 67 : 2000 : R2010 | Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked |
| ASTM A 392 : 2011 : REV A | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
| ASTM A 1086 : 2013 | Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types |
| MIL-STD-163 Revision C:1978 | STEEL MILL PRODUCTS PREPARATION FOR SHIPMENT AND STORAGE |
| ASTM A 641/A641M : 2009 | Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire |
| ASTM A 847 : 1999 : REV A : R2003 | Standard Specification for Cold-Formed Welded and Seamless High Strength, Low Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance |
| ASTM A 618/A618M : 2004 : R2015 | Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing |
| ASTM A 549 : 1982 | Specification for Steel Wire, Carbon, Cold-Heading Quality, for Wood Screws<med> |
| ASTM A 232/A232M : 2005 | Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire |
| AASHTO M 322M/M 322 : 2010 | SPECIFICATION FOR RAIL-STEEL AND AXLE-STEEL DEFORMED BARS FOR CONCRETE REINFORCEMENT |
| ASTM A 856/A856M : 2003 : R2014 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
| ASTM A 824 : 2001 | Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence |
| ASTM A 600 : 1992 : REV A : R2016 | Standard Specification for Tool Steel High Speed |
| ASTM A 530/A530M : 2012-06 | SPECIFICATION FOR GENERAL REQUIREMENTS FOR SPECIALIZED CARBON AND ALLOY STEEL PIPE |
| ASTM A 818 : 2006 : R2016 | Standard Specification for Coppered Carbon Steel Wire |
| ASTM A 999/A999M : 2018 : REDLINE | Standard Specification for General Requirements for Alloy and Stainless Steel Pipe |
| ASTM A 1059/A1059M : 2008 | Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products |
| ASTM A 713 : 2004 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
| ASTM F 1665 : 2008 : R2013 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM A 500 : 2003 | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ASTM A 853 : 2004 : R2010 | Standard Specification for Steel Wire, Carbon, for General Use |
| ASTM A 702 : 2013-11 | SPECIFICATION FOR STEEL FENCE POSTS, HOT WROUGHT |
| ASTM A 599/A599M : 2007 | Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet |
| ASTM A 66 : 2007 | Standard Specification for Steel Screw Spikes |
| ASTM A 752 : 2004 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel |
| ASTM A 623 : 2016 : REDLINE | Standard Specification for Tin Mill Products, General Requirements |
| ASTM A 135/A135M : 2009 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
| ASTM E 510 : 1979 | Recommended Practice for Determining Pavement Surface Frictional and Polishing Characteristics Using a Small Torque Device (Withdrawn 1985) |
| ASTM A 764 : 2007 | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs |
| ASTM A 764 : 2007 : R2017 | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs |
| ASTM A 615/A615M : 2016-03 | SPECIFICATION FOR DEFORMED AND PLAIN CARBON-STEEL BARS FOR CONCRETE REINFORCEMENT |
| ASTM A 818 : 2006 : R2010 | Standard Specification for Coppered Carbon Steel Wire |
| ASTM A 686 : 1992 : R2004 | Standard Specification for Tool Steel, Carbon |
| ASTM A 854/A854M : 2008 : R2013 | Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire |
| ASTM F 1665 : 2008 : R2018 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM F 1345 : 2010 | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM A 1028 : 2003 : R2009 | Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils |
| ASTM A 29/A29M : 2016 : REDLINE | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
| ASTM A 726 : 2005 : R2010 | Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types |
| ASTM F 1183 : 1996 : R2006 | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| ASTM F 1665 : 2008 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM A 681 : 2008 : R2015 | Standard Specification for Tool Steels Alloy |
| ASTM A 390 : 2006 : R2016 | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) |
| ASTM A 510/A510M : 2018 : REDLINE | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel |
| ANSI B11.18 : 2006 : R2012 | SAFETY REQUIREMENTS FOR MACHINES PROCESSING OR SLITTING COILED OR NON-COILED METAL |
| AASHTO M 281 : 1996 | SPECIFICATION FOR STEEL FENCE POSTS AND ASSEMBLIES, HOT-WROUGHT |
| AASHTO M 55M/M 55 : 2013 | METHOD OF TEST FOR STEEL WELDED WIRE REINFORCEMENT, PLAIN, FOR CONCRETE |
| AASHTO M 334M/M 334 : 2017 | SPECIFICATION FOR UNCOATED, CORROSION-RESISTANT, DEFORMED AND PLAIN CHROMIUM ALLOYED, BILLET-STEEL BARS FOR CONCRETE REINFORCEMENT AND DOWELS |
| AASHTO M 280 : 2014 | SPECIFICATION FOR METALLIC-COATED (CARBON) STEEL BARBED WIRE |
| ASTM A 793 : 1996 : R2009 | Standard Specification for Rolled Floor Plate, Stainless Steel |
| ASTM A 67 : 2000 : R2005 | Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked |
| SAE AMS S 6758 : 2017 | STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
| ASTM A 706/A706M : 2016 : REDLINE | Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement |
| ASTM A 407 : 2007 : R2013 | Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs |
| ASTM A 684/A684M : 2017 : REDLINE | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled |
| ASTM A 905 : 2004 : R2017 | Standard Specification for Steel Wire, Pressure Vessel Winding |
| ASTM A 617/A617M : 1996 | SPECIFICATION FOR AXLE-STEEL DEFORMED AND PLAIN BARS FOR CONCRETE REINFORCEMENT |
| NAVSEA T9074 BD GIB 010/0300 : 0 | BASE MATERIALS FOR CRITICAL APPLICATIONS: REQUIREMENTS FOR LOW ALLOY STEEL PLATE, FORGINGS, CASTINGS, SHAPES, BARS, AND HEADS OF HY-80/100/130 AND HSLA-80/100 |
| ASTM A 648 : 2018 : REDLINE | Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe |
| ASTM A 793 : 1996 : R2014 | Standard Specification for Rolled Floor Plate, Stainless Steel (Withdrawn 2023) |
| ASTM A 725M : 1984 | Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed, Types 27H168M, 30H183M, 35H207M (Withdrawn 1988) |
| ASTM A 1000 : 2005 | Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality |
| ASTM A 1099/A1099M : 2017 | Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels |
| ASTM A 184/A184M : 2017 : REDLINE | Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement |
| MIL-S-24093 Revision A:1991 | STEEL FORGINGS, CARBON AND ALLOY HEAT TREATED |
| ASTM A 947M : 2016 : REDLINE | Standard Specification for Textured Stainless Steel Sheet [Metric] |
| ASTM A 769/A769M : 2017 : REDLINE | Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes |
| ASTM A 809 : 2008 : R2013 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire |
| NASA KSC SPEC P 0027 : 2010 | TUBING, SUPERAUSTENITIC STEEL, CORROSION RESISTANT, UNS N08367 AND UNS S31254, SEAMED, BRIGHT ANNEALED, PASSIVATED, SPECIFICATION FOR |
| ASTM A 878/A878M : 2017-09 | SPECIFICATION FOR STEEL WIRE, MODIFIED CHROMIUM VANADIUM VALVE SPRING QUALITY |
| ASTM A 795/A795M : 2013 : REDLINE | Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use |
| ASTM A 1 : 2000 | Standard Specification for Carbon Steel Tee Rails |
| ASTM A 817 : 2012 : R2017 | Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire |
| ASTM A 681:2008 | Standard Specification for Tool Steels Alloy |
| ASTM A 824 : 2001 : R2017 | Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence |
| ASTM A 865/A865M : 2006 | Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
| ASTM A 809 : 2008 : R2017 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire |
| ASTM A 686 : 1992 : R2016 | Standard Specification for Tool Steel, Carbon |
| ASTM A 555/A555M : 2016 : REDLINE | Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods |
| ASTM A 600 : 1992 : REV A : R1999 | Standard Specification for Tool Steel High Speed |
| ASTM F 1183 : 1996 | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| ASTM F 1267 : 2015-12 | SPECIFICATION FOR METAL, EXPANDED, STEEL |
| ASTM A 2 : 2002 : R2014 | Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
| ASTM A 865/A865M : 2006 : R2012 | Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
| ASTM A 491 : 2011 : R2017 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric |
| ASTM A 641/A641M : 2009 : REV A : R2014 | Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire |
| ASTM A 824 : 2001 : R2012 | Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence |
| ASTM A 116 : 2011 | Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric |
| ASTM A 817 : 2012 | Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire |
| ASTM A 525 : 1993 | Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process (Withdrawn 1994) |
| QQ-T-580 Revision C:1977 | TOOL STEEL, CARBON AND CARBON VANADIUM |
| ASTM A 618/A618M : 2004 | Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing |
| ASTM A 65 : 2007 : R2013 | Standard Specification for Steel Track Spikes (Withdrawn 2022) |
| QQ-T-570 Revision C:1977 | TOOL STEEL, ALLOY |
| AASHTO MP 18M/MP 18 : 1900 | SPECIFICATION FOR UNCOATED, CORROSION-RESISTANT, DEFORMED AND PLAIN ALLOY, BILLET-STEEL BARS FOR CONCRETE REINFORCEMENT AND DOWELS |
| ASTM A 417 : 1993 : R2004 | Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units (Withdrawn 2008) |
| ASTM A 793 : 1996 | Standard Specification for Rolled Floor Plate, Stainless Steel |
| IFI 140 : 2000 | CARBON AND ALLOY STEEL WIRE, RODS AND BARS FOR MECHANICAL FASTENERS |
| ASTM A 67 : 2000 : R2016 | Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked |
| ASTM F 547 : 2017 : REDLINE | Standard Terminology of Nails for Use with Wood and Wood-Base Materials |
| ASTM A 2 : 2002 | Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
| ASTM A 865 : 2003 | Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
| AASHTO M 275M/M 275 : 2008 : R2012 | SPECIFICATION FOR UNCOATED HIGH-STRENGTH STEEL BARS FOR PRESTRESSING CONCRETE |
| ASTM A 792M : 1993 | Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot Dip Process, General Requirements (Metric) (Withdrawn 1994) |
| AASHTO M 31M/M 31 : 2015 | STANDARD SPECIFICATION FOR DEFORMED AND PLAIN CARBON AND LOW-ALLOY STEEL BARS FOR CONCRETE REINFORCEMENT |
| ASTM F 1183 : 1996 : R2011 | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| AASHTO M 279 : 2014 | SPECIFICATION FOR METALLIC-COATED, STEEL WOVEN WIRE FENCE FABRIC |
| ASTM A 1028 : 2003 | Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils |
| ASTM A 686 : 1992 : R1999 | Standard Specification for Tool Steel, Carbon |
| ASTM A 67 :2000 | Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked |
| ASTM A 618/A618M : 2004 : R2010 | Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing |
| ASTM A 677 : 2016 : REDLINE | Standard Specification for Nonoriented Electrical Steel Fully Processed Types |
| ASTM A 677/A677M : 1999 | Standard Specification for Nonoriented Electrical Steel Fully Processed Types |
| ASTM A 818 : 2006 | Standard Specification for Coppered Carbon Steel Wire |
| ASTM A 714 : 1999 : R2009 : EDT 1 | Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe (Withdrawn 2014) |
| ASTM A 1 : 2000 : R2005 | Standard Specification for Carbon Steel Tee Rails |
| ASTM A 1 : 2000 : R2018 | Standard Specification for Carbon Steel Tee Rails |
| ASTM A 877/A877M : 2017 : REDLINE | Standard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality |
| ASTM F 1345 : 2010 : REV A | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM A 821/A821M : 2015 : REDLINE | Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks |
| ASTM A 856/A856M : 2003 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
| ASTM A 635/A635M : 2015 : REDLINE | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for |
| ASTM A 752M : 2004 : R2010 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] (Withdrawn 2011) |
| ASTM A 2 : 2002 : R2008 | Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
| ASTM A 1059/A1059M : 2008 : R2013 | Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products |
| ASTM A 3 : 2001 | Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated) |
| MIL-S-23008 Revision D:1988 | STEEL CASTINGS, ALLOY, HIGH YIELD STRENGTH ((HY-80 AND HY-100) |
| ASTM A 713 : 2004 : R2010 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
| ASTM A 407 : 2007 | Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs |
| ASTM A 683 : 2016 : REDLINE | Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types |
| ASTM A 390 : 2006 : R2011 | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) |
| AASHTO M 32M/M 32 : 2009 | SPECIFICATION FOR STEEL WIRE, PLAIN, FOR CONCRETE REINFORCEMENT |
| ASTM A 599/A599M : 2007 : R2012 | Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet |
| AASHTO M 32M/M 32 : 2009 : R2013 | SPECIFICATION FOR STEEL WIRE, PLAIN, FOR CONCRETE REINFORCEMENT |
| ASTM A 392 : 2011 : REV A : R2017 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
| ASTM F 1183 : 1996 : R2017 | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| ASTM A 686 : 1992 : R2010 | Standard Specification for Tool Steel, Carbon |
| ASTM A 901 : 2012 : REDLINE | Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types |
| ASTM A 759 : 2010 | Standard Specification for Carbon Steel Crane Rails |
| ASTM A 230/A230M : 2005 : R2011 : EDT 1 | Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality |
| ASTM A 232/A232M : 2005 : R2011 : EDT 1 | Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire |
| IFI 153 : 2003 | STAINLESS STEEL WIRE AND RODS FOR MECHANICAL FASTENERS |
| ASTM A 116 : 2011 : R2016 | Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric |
| AASHTO M 322M/M 322 : 2010 : R2015 | SPECIFICATION FOR RAIL-STEEL AND AXLE-STEEL DEFORMED BARS FOR CONCRETE REINFORCEMENT |
| AASHTO M 225M/M 225 : 2009 : R2013 | SPECIFICATION FOR STEEL WIRE, DEFORMED, FOR CONCRETE REINFORCEMENT |
| ASTM A 683/A683M : 1999 | Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types |
| ASTM A 945/A945M : 2016 : REDLINE | Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness |
| ASTM F 1083 : 2016-02 | SPECIFICATION FOR PIPE, STEEL, HOT-DIPPED ZINC-COATED (GALVANIZED) WELDED, FOR FENCE STRUCTURES |
| ASTM A 905 : 2004 | Standard Specification for Steel Wire, Pressure Vessel Winding |
| ASTM A 665 : 75(1979) | SPECIFICATION FOR FLAT-ROLLED, GRAIN-ORIENTED, SILICON IRON, ELECTRICAL STEEL, FULLY PROCESSED TYPES 23G048, 27G053, AND 35G066 |
| ASTM A 714 : 1999 : R2003 | Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe |
| ASTM A 501/A501M : 2014 : REDLINE | Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing |
| ASTM A 183 : 2014 : REDLINE | Standard Specification for Carbon Steel Track Bolts and Nuts |
| ASTM A 66 : 2007 : R2013 | Standard Specification for Steel Screw Spikes |
| ASTM A 854/A854M : 2008 | Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire |
| ASTM A 390:2006 | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) |
| ASTM A 764 : 2007 : R2012 | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs |
| ASTM A 505 : 2016 : REDLINE | Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
| ASTM A 65 : 2007 | Standard Specification for Steel Track Spikes |
| ASTM A 853 : 2004 : R2017 | Standard Specification for Steel Wire, Carbon, for General Use |
| ASTM A 793 : 1996 : R2001 | Standard Specification for Rolled Floor Plate, Stainless Steel |
| ASTM A 778/A778M : 2016 : REDLINE | Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products |
| ASTM A 856/A856M : 2003 : R2009 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
| ASTM A 840/A840M : 2000 : R2006 | Standard Specification for Fully Processed Magnetic Lamination Steel (Withdrawn 2011) |
| ASTM A 759 : 2010 : R2016 | Standard Specification for Carbon Steel Crane Rails |
| ASTM A 847/A847M : 2014 : REDLINE | Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance |
| ASTM A 3 : 2001 : R2012 | Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated) |
| ASTM A 600 : 1992 : REV A : R2004 | Standard Specification for Tool Steel High Speed |
| ASTM F 1345 : 2010 : REV A : R2015 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM A 599/A599M : 2007 : R2017 | Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet |
| ASTM A 824 : 2001 : R2007 | Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence |
| ASTM A 491 : 2011 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric |
| ASTM D 3953 : 2006 | Standard Specification for Strapping, Flat Steel and Seal |
| ASTM D 3950 : 2010 : REV B | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 4169 : 2016 | Standard Practice for Performance Testing of Shipping Containers and Systems |
| ASTM D 3950 : 2017 : REDLINE | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 4169 : 2016 : REDLINE | Standard Practice for Performance Testing of Shipping Containers and Systems |
| ASTM D 4649 : 2003 : R2016 | Standard Guide for Selection and Use of Stretch Wrap Films |
| ASTM D 4169 : 2005 | Standard Practice for Performance Testing of Shipping Containers and Systems |
| ASTM D 3953 : 2007 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 3950 : 2001 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 3953 : 2015 : REDLINE | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 3950 : 2010 : REV A | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 3953 : 1991 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 3950 : 2016 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 3950 : 2007 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 4169 : 1999 : EDT 1 | Standard Practice for Performance Testing of Shipping Containers and Systems |
| ASTM D 4675 : 2009 | Standard Guide for Selection and Use of Flat Strapping Materials |
| ASTM D 3953 : 2012 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 3953 : 2015 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 4675 : 2006 | Standard Guide for Selection and Use of Flat Strapping Materials |
| ASTM D 3950 : 2004 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 3950 : 2009 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 4169 : 2001 | Standard Practice for Performance Testing of Shipping Containers and Systems |
| ASTM D 3950 : 2005 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 996 : 2016 : REDLINE | Standard Terminology of Packaging and Distribution Environments |
| ASTM D 5728 : 2000 : R2006 | Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport |
| ASTM D 3953 : 2005 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 4169 : 2004 : REV A | Standard Practice for Performance Testing of Shipping Containers and Systems |
| ASTM D 3950 : 2009 : REV A | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 4169 : 2001 : EDT 1 | Standard Practice for Performance Testing of Shipping Containers and Systems |
| ASTM D 3950 : 2011 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 4649 : 2003 : R2009 | Standard Guide for Selection and Use of Stretch Wrap Films |
| ASTM D 5728 : 2000 | Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport |
| ASTM D 4675 : 2003 | Standard Guide for Selection and Use of Flat Strapping Materials |
| ASTM D 3953 : 2007 : REV A | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 5728 : 2012 : REDLINE | Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport |
| ASTM D 4169 : 2004 | Standard Practice for Performance Testing of Shipping Containers and Systems |
| ASTM D 4169 : 2008 | Standard Practice for Performance Testing of Shipping Containers and Systems |
| ASTM D 3950 : 2006 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 4675 : 2000 | Standard Guide for Selection and Use of Flat Strapping Materials |
| ASTM D 5728 : 2012 | Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport |
| ASTM D 3950 : 2017 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 4675 : 2006 : EDT 1 | Standard Guide for Selection and Use of Flat Strapping Materials |
| ASTM D 4675 : 2006 : EDT 2 | Standard Guide for Selection and Use of Flat Strapping Materials |
| ASTM D 4675 : 2009 : EDT 1 | Standard Guide for Selection and Use of Flat Strapping Materials |
| ASTM D 4169 : 2014 | Standard Practice for Performance Testing of Shipping Containers and Systems |
| ASTM D 3950 : 2012 : REV A | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 4675 : 2014 | Standard Guide for Selection and Use of Flat Strapping Materials |
| ASTM D 3950 : 2010 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 3953 : 2002 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 3950 : 2000 | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM D 4169 : 2009 | Standard Practice for Performance Testing of Shipping Containers and Systems |
| ASTM D 3953 : 2013 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 4649 : 2003 | Standard Guide for Selection and Use of Stretch Wrap Films |
| ASTM D 3953 : 1997 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 4675 : 2014 : REV A | Standard Guide for Selection and Use of Flat Strapping Materials<sup>1</sup> |
| ASTM D 4649 : 2000 | Standard Guide for Selection and Use of Stretch Wrap Films |
US$75.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.