• There are no items in your cart

ASTM A 929/A929M : 2018

Current
Current

The latest, up-to-date edition.

Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

05-18-2018

1.1This specification covers steel sheet used in the manufacture of corrugated steel pipe for storm sewers, culverts, drains, and similar uses. The sheet is metallic coated by the hot-dip process. Material for this use is furnished in coils, flat in cut lengths, and corrugated in cut lengths. Many metallic coated materials are covered in this material specification. Users must determine which product best serves their needs. Five different metallic coatings are included:

1.1.1Zinc-coated (galvanized),

1.1.2Zinc-5 % aluminum-Mischmetal (Zn-5Al-MM) alloy coated,

1.1.355 % aluminum-zinc (55Al-Zn) alloy coated,

1.1.4Aluminum-coated Type 2 (aluminized Type 2), and

1.1.5Aluminum-coated Type 1 (aluminized Type 1).

1.2Zinc-coated sheet is available in two coating weights [masses]. Other metallic coatings are available in one coating weight [mass] only.

1.3The values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
A 05
DocumentType
Standard
Pages
5
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM A 762/A762M : 2019 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
ASTM A 760/A760M : 2015 : R2020 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
ASTM A 1105 : 2017 Standard Specification for Corrugated Steel Manhole Assemblies
ASTM A 742/A742M : 2020 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
ASTM A 924/A924M : 2020 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
ASTM A 1092 : 2015 : R2020 Standard Specification for Steel Sheet, as Cold-Reduced, for Conversion to Annealed Cold-Rolled Steel Sheet, and Hot Dip Metallic-Coated Steel Sheet
ASTM A 998/A998M : 2018 Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications

ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM A 90/A90M : 2021 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A 924/A924M : 2022 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
ASTM A 428/A428M : 2010 : R2019 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM A 90/A90M : 2013 : R2018 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM A 902 : 2023 : REV A Standard Terminology Relating to Metallic Coated Steel Products
ASTM A 924/A924M : 2020 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
ASTM A 902 : 2023 Standard Terminology Relating to Metallic Coated Steel Products
ASTM A 924/A924M : 2022 : REV A Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
ASTM B 750 : 2016 Standard Specification for GALFAN
ASTM A 428/A428M : 2021 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM A 924/A924M : 2009 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
ASTM B 750 : 2022 Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings
ASTM A 902 : 2018 : REV A Standard Terminology Relating to Metallic Coated Steel Products
ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

View more information
US$63.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.