• There are no items in your cart

ASTM C 10/C10M : 2019

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Natural Cement
Available format(s)

Hardcopy , PDF

Superseded date

02-02-2024

Language(s)

English

Published date

11-14-2019

1.1This specification covers natural cement and quick-setting natural cement.

Note 1:Examples of typical past uses of natural cement include unit masonry mortar, cement plaster, grout, whitewash, and concrete.

1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. Values in SI units [or inch-pound units] shall be obtained by measurement in SI units [or inch-pound units] or by appropriate conversion, using the Rules for Conversion and Rounding given in IEEE/ASTM SI 10, of measurements made in other units [or SI units]. Values are stated in only SI units when inch-pound units are not used in practice.

1.3The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
C 01
DocumentType
Standard
Pages
3
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM C 1713 : 2023 Standard Specification for Mortars for the Repair of Historic Masonry

ASTM C 109/C109M : 2020 : REV B Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
ASTM C 305 : 2014 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
ASTM C 465 : 2019 Standard Specification for Processing Additions for Use in the Manufacture<brk/> of Hydraulic Cements
ASTM C 183/C183M : 2016 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
ASTM C 191 : 2019 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
ASTM C 188 : 2017 Standard Test Method for Density of Hydraulic Cement
ASTM C 109/C109M : 2021 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
ASTM C 185 : 2015 : REV A Standard Test Method for Air Content of Hydraulic Cement Mortar
ASTM C 187 : 2023 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
ASTM C 688 : 2022 Standard Specification for Functional Additions for Use in Hydraulic Cements
ASTM C 191 : 2018 : REV A Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
ASTM C 204 : 2024 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM C 465 : 2023 Standard Specification for Processing Additions for Use in the Manufacture<brk/> of Hydraulic Cements
ASTM C 183/C183M : 2022 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
ASTM C 151/C151M : 2018 Standard Test Method for Autoclave Expansion of Hydraulic Cement
ASTM C 151/C151M : 2023 Standard Test Method for Autoclave Expansion of Hydraulic Cement
ASTM C 109/C109M : 2020 : REV A Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
ASTM C 150/C150M : 2021 Standard Specification for Portland Cement
ASTM C 204 : 2023 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM C 778 : 2017 Standard Specification for Standard Sand
ASTM C 191 : 2021 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
ASTM C 114 : 2023 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C 109/C109M : 2016 : REV A Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
ASTM C 114 : 2009 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C 188 : 2017 : R2023 Standard Test Method for Density of Hydraulic Cement
ASTM C 183/C183M : 2023 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
ASTM C 204 : 2018 : EDT 1 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM C 187 : 2016 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
ASTM C 150/C150M : 2020 Standard Specification for Portland Cement
ASTM C 150/C150M : 2022 Standard Specification for Portland Cement
ASTM C 688 : 2014 Standard Specification for Functional Additions for Use in Hydraulic Cements
ASTM C 114 : 2018 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C 114 : 2022 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C 778 : 2021 Standard Specification for Standard Sand
ASTM C 465 : 2022 Standard Specification for Processing Additions for Use in the Manufacture<brk/> of Hydraulic Cements

View more information
US$66.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.