Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-05-2021

Publisher

American Society for Testing and Materials

1.1This specification covers the types and physical properties of spray applied rigid cellular polyurethane intended for use as thermal insulation. The operating temperatures of the surfaces to which the insulation is applied shall not be lower than −22°F (−30°C) or greater than +225°F (+107°C). For specific applications, the actual temperature limits shall be as agreed upon between the manufacturer and the purchaser.

1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	C 16
DocumentType	Standard
Pages	4
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM C 1029 : 2015

ASTM C 165 : 2023	Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM D 883 : 2023	Standard Terminology Relating to Plastics
ASTM E 84 : 2023 : REV D	Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 168 : 2019	Standard Terminology Relating to Thermal Insulation
ASTM C 177 : 2019	Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM E 96/E96M : 2022 : REV A : EDT 1	Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D 6226 : 2021	Standard Test Method for Open Cell Content of Rigid Cellular Plastics
ASTM E 96/E96M : 2022 : REV A	Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E 84 : 2023 : REV C	Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 883 : 2024	Standard Terminology Relating to Plastics
ASTM C 1363 : 2019	Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM E 96/E96M : 2021	Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D 1621 : 2016 : R2023	Standard Test Method for Compressive Properties of Rigid Cellular Plastics
ASTM C 1303/C1303M : 2019	Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM D 883 : 2022	Standard Terminology Relating to Plastics
ASTM E 96/E96M : 2022	Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D 883 : 2020 : REV B	Standard Terminology Relating to Plastics
ASTM C 1303/C1303M : 2022	Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM E 84 : 2023	Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 1621 : 2016	Standard Test Method for Compressive Properties of Rigid Cellular Plastics
ASTM E 96/E96M : 2023	Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E 84 : 2021	Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 518 : 2002	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM E 96/E96M : 2024	Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E 84 : 2022	Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E 84 : 2020	Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E 84 : 2021 : REV A	Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 165 : 2007 : R2017	Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM E 96/E96M : 2016	Standard Test Methods for Water Vapor Transmission of Materials
ASTM C 518 : 2017	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM C 518 : 2021	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM E 84 : 2023 : REV B	Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 177 : 2019 : EDT 1	Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM D 6226 : 2015	Standard Test Method for Open Cell Content of Rigid Cellular Plastics
ASTM D 1623 : 2017	Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
ASTM C 1303/C1303M : 2023	Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM C 168 : 2022	Standard Terminology Relating to Thermal Insulation
ASTM D 1623 : 2017 : R2023	Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
ASTM E 84 : 2023 : REV A	Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 1363 : 2024	Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM C 518 : 1998	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus