ASTM C 1038/C1038M : 2014 : REV B
|
Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
|
ASTM C 1714/C1714M : 2019 : REV A
|
Standard Specification for Preblended Dry Mortar Mix for Unit Masonry
|
ASTM C 1240 : 2015
|
Standard Specification for Silica Fume Used in Cementitious Mixtures
|
ASTM A 1081/A1081M : 2015
|
Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand
|
ASTM C 1600/C1600M : 2018
|
Standard Specification for Rapid Hardening Hydraulic Cement
|
ASTM C 1403 : 2015
|
Standard Test Method for Rate of Water Absorption of Masonry Mortars
|
ASTM C 1506 : 2017
|
Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
|
ASTM C 1072 : 2013 : EDT 1
|
Standard Test Methods for Measurement of Masonry Flexural Bond Strength
|
ASTM C 348 : 2018
|
Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
|
ASTM C 311/C311M : 2018
|
Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
|
ASTM C 1107/C1107M : 2017
|
Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
|
ASTM C 230/C230M : 2014
|
Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
|
ASTM C 596 : 2018
|
Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
|
ASTM C 157/C157M : 2017
|
Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
|
ASTM C 1439 : 2013
|
Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
|
ASTM C 387/C387M : 2017
|
Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
|
ASTM C 1581/C1581M : 2018 : REV A
|
Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
|
ASTM C 441/C441M : 2017
|
Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
|
ASTM C 1567 : 2013
|
Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
|
ASTM C 125 : 2019
|
Standard Terminology Relating to Concrete and Concrete Aggregates
|
ASTM C 109/C109M : 2016 : REV A
|
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
|
ASTM C 827/C827M : 2016
|
Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
|
ASTM C 989/C989M : 2018 : REV A
|
Standard Specification for Slag Cement for Use in Concrete and Mortars
|
ASTM C 1856/C1856M : 2017
|
Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete
|
ASTM C 942 : 2015
|
Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
|
ASTM C 563 : 2018 : REV A
|
Standard Guide for Approximation of Optimum SO<inf>3</inf> in Hydraulic Cement
|
ASTM C 1384 : 2018 : EDT 1
|
Standard Specification for Admixtures for Masonry Mortars
|