Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass

Available format(s)

PDF

Language(s)

English

Published date

06-01-2016

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 15.02, 2017 Defines the quantitative chemical analysis of soda-lime and borosilicate glass compositions for both referee and routine analysis.

1.1These test methods cover the quantitative chemical analysis of soda-lime and borosilicate glass compositions for both referee and routine analysis. This would be for the usual constituents present in glasses of the following types: (1) soda-lime silicate glass, (2) soda-lime fluoride opal glass, and (3) borosilicate glass. The following common oxides, when present in concentrations greater than indicated, are known to interfere with some of the determinations in this method: 2 % barium oxide (BaO), 0.2 % phosphorous pentoxide (P₂O₅), 0.05 % zinc oxide (ZnO), 0.05 % antimony oxide (Sb₂O₃), 0.05 % lead oxide (PbO).

1.2The analytical procedures, divided into two general groups, those for referee analysis, and those for routine analysis, appear in the following order:

		Sections
Procedures for Referee Analysis:
	Silica	10
	BaO, R₂O₂ (Al₂O₃ + P₂O₅), CaO, and MgO	11 – 15
	Fe₂O₃, TiO₂, ZrO₂ by Photometry and Al₂O₃ by Com- plexiometric Titration	16 – 22
	Cr₂O₃ by Volumetric and Photometric Methods	23 – 25
	MnO by the Periodate Oxidation Method	26 – 29
	Na₂O by the Zinc Uranyl Acetate Method and K₂O by the Tetraphenylborate Method	30 – 33
	SO₃ (Total Sulfur)	34 – 35
	As₂O₃ by Volumetric Method	36 – 40

Procedures for Routine Analysis:
	Silica by the Single Dehydration Method	42 – 44
	Al₂O₃, CaO, and MgO by Complexiometric Titration, and BaO, Na₂O, and K₂O by Gravimetric Method	45 – 51
	BaO, Al₂O₃, CaO, and MgO by Atomic Absorption; and Na₂O and K₂O by Flame Emission Spectroscopy	52 – 59
	SO₃ (Total Sulfur)	60
	B₂O₃	61 – 62
	Fluorine by Pyrohydrolysis Separation and Specific Ion Electrode Measurement	63 – 66
	P₂O₅ by the Molybdo-Vanadate Method	67 – 70
	Colorimetric Determination of Ferrous Iron Using 1,10 Phenanthroline	71 – 76

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee	C 14
DocumentType	Redline
Pages	24
PublisherName	American Society for Testing and Materials
Status	Current

MIL-S-14374 Revision C:1983	SILICA GEL, IRON FREE
ASTM F 1538 : 2003	Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation
CSA A438 : 0	CONCRETE CONSTRUCTION FOR HOUSING AND SMALL BUILDINGS
ASTM F 1538 : 2003 : R2009	Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation
ASTM E 688 : 1994 : R1999	Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing
ASTM E 708 : 1979 : R1999	Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
BS EN 62321-5:2014	Determination of certain substances in electrotechnical products Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
ASTM E 688 : 1994 : R2011	Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing (Withdrawn 2019)
MIL-PRF-22344 Revision E:2004	INSULATION, PIPE, THERMAL
MIL-PRF-9954 Revision D:2009	GLASS BEADS: FOR CLEANING AND PEENING
ASTM C 1285 : 2014 : REDLINE	Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)
ASTM E 708 : 1979 : R2011	Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
ASTM F 561 : 2013	Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
ASTM E 688 : 1994 : R2006	Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing
ASTM E 708 : 1979 : R2017	Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
SAE AMS 2431 : 2018	PEENING MEDIA, GENERAL REQUIREMENTS
ASTM C 146 : 1994 : REV A : R1999	Standard Test Methods for Chemical Analysis of Glass Sand
ASTM C 430 : 2017 : REDLINE	Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
ASTM C 1571 : 2003 : R2012	Standard Guide for Characterization of Radioactive and/or Hazardous Wastes for Thermal Treatment (Withdrawn 2018)
ASTM C 1571 : 2003	Standard Guide for Characterization of Radioactive and/or Hazardous Wastes for Thermal Treatment
MIL-S-17726 Revision C:1980	SAND SANDBLAST
ASTM E 708 : 1979 : R2006	Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
ASTM C 146 : 1994 : REV A : R2014	Standard Test Methods for Chemical Analysis of Glass Sand
ASTM C 146 : 1994 : REV A : R2009	Standard Test Methods for Chemical Analysis of Glass Sand
I.S. EN 62321-5:2014	DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 5: CADMIUM, LEAD AND CHROMIUM IN POLYMERS AND ELECTRONICS AND CADMIUM AND LEAD IN METALS BY AAS, AFS, ICP-OES AND ICP-MS
ASTM C 1412 : 1999	Standard Practice for Microwave Oven Dissolution of Glass Containing Radioactive and Mixed Wastes (Withdrawn 2001)
ASTM C 146 : 1994 : REV A : R2004	Standard Test Methods for Chemical Analysis of Glass Sand
ASTM F 1538 : 2003 : R2017	Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation
ASTM F 1538 : 2003 : EDT 1	Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation
EN 62321-5:2014	Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS

ASTM E 50 : 2017 : REDLINE	Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
ASTM C 146 : 1994 : REV A : R2004	Standard Test Methods for Chemical Analysis of Glass Sand

View more information

US$108.00

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

ASTM C 169 : 2016 : REDLINE

Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass

Abstract

Scope

General Product Information

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory