ASTM C 566 : 2013 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
09-09-2020
English
03-01-2013
CONTAINED IN VOL 04.02, 2015 Specifies the determination of the percentage of evaporable moisture in a sample of aggregate by drying both surface moisture and moisture in the pores of the aggregate.
Committee |
C 09
|
DocumentType |
Redline
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
ACI 211.3R : 2002 | GUIDE FOR SELECTING PROPORTIONS FOR NO-SLUMP CONCRETE |
ASTM D 8140 : 2018 | Standard Guide for the Use of Foundry Sand in Asphalt Mixtures |
ASTM C 1797M : 2016 | Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete |
ASTM E 889 : 1982 : R2004 | Standard Test Method for Composition or Purity of a Solid Waste Materials Stream |
ASTM D 4914/D4914M : 2016 : REDLINE | Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit |
ASTM C 192/C192M : 2016-04 | PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY |
ASTM E 889 : 1982 : R2014 | Standard Test Method for Composition or Purity of a Solid Waste Materials Stream |
ASTM D 5030 : 2004 | Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit |
ASTM C 70 : 2013 : REDLINE | Standard Test Method for Surface Moisture in Fine Aggregate |
ACI 207.5R : 2011 | REPORT ON ROLLER-COMPACTED MASS CONCRETE |
ASTM E 688 : 1994 : R2011 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing (Withdrawn 2019) |
ACI ITG-4.1 : 2007 | SPECIFICATION FOR HIGH-STRENGTH CONCRETE IN MODERATE TO HIGH SEISMIC APPLICATIONS |
ASTM C 387/C387M : 2017 : REDLINE | Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar |
ACI 211.1 : 1991 | SELECTING PROPORTIONS FOR NORMAL, HEAVYWEIGHT AND MASS CONCRETE |
ACI 503.3M : 2010 | SPECIFICATION FOR PRODUCING A SKID-RESISTANT SURFACE ON CONCRETE BY THE USE OF EPOXY AND AGGREGATE - METRIC |
ACI 548.5R : 2016 | GUIDE FOR POLYMER CONCRETE OVERLAYS |
ACI 506.4R : 1994 | GUIDE FOR THE EVALUATION OF SHOTCRETE |
ASTM C 1375 : 2000 : R2009 | Standard Guide for Substrates Used in Testing Building Seals and Sealants |
ASTM D 7229 : 2008 | Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor |
ASTM C 127 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate |
ASTM E 889 : 1982 : R2009 | Standard Test Method for Composition or Purity of a Solid Waste Materials Stream |
ASTM C 1375 : 2000 | Standard Guide for Substrates Used in Testing Building Seals and Sealants |
ASTM E 688 : 1994 : R2006 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing |
ACI 237R : 2007 | SELF-CONSOLIDATING CONCRETE |
ASTM E 889 : 1982 : R1996 | Standard Test Method for Composition or Purity of a Solid Waste Materials Stream |
ACI ITG-4.2R : 2006 | MATERIALS AND QUALITY CONSIDERATIONS FOR HIGH-STRENGTH CONCRETE IN MODERATE TO HIGH SEISMIC APPLICATIONS |
ACI 548.10 : 2010 | SPECIFICATION FOR TYPE MMS (METHYL METHACRYLATE SLURRY) POLYMER OVERLAYS FOR BRIDGE AND PARKING GARAGE DECKS |
ACI PRC-363.2 : 2011 | GUIDE TO QUALITY CONTROL AND ASSURANCE OF HIGH-STRENGTH CONCRETE |
ACI SPEC-548.10 : 2010 | SPECIFICATION FOR TYPE MMS (METHYL METHACRYLATE SLURRY) POLYMER OVERLAYS FOR BRIDGE AND PARKING GARAGE DECKS |
ACI 548.8 : 2007 | SPECIFICATION FOR TYPE EM (EPOXY MULTI-LAYER) POLYMER OVERLAY FOR BRIDGE AND PARKING GARAGE DECKS |
ACI 503.3 : 2010 | SPECIFICATION FOR PRODUCING A SKID-RESISTANT SURFACE ON CONCRETE BY THE USE OF EPOXY AND AGGREGATE |
ACI 548.8M : 2007 | SPECIFICATION FOR TYPE EM (EPOXY MULTI-LAYER) POLYMER OVERLAY FOR BRIDGE AND PARKING GARAGE DECKS |
ASTM D 7172 : 2014 : REDLINE | Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared |
ACI 211.2 : 1998 | SELECTING PROPORTIONS FOR STRUCTURAL LIGHTWEIGHT CONCRETE |
ACI 221R : 1996 | GUIDE FOR USE OF NORMAL WEIGHT AND HEAVYWEIGHT AGGREGATES IN CONCRETE |
ACI 311.5R : 2004 | GUIDE FOR CONCRETE PLANT INSPECTION AND TESTING OF READY-MIXED CONCRETE |
ACI 548.9 : 2008 | SPECIFICATION FOR TYPE ES (EPOXY SLURRY) POLYMER OVERLAYS FOR BRIDGE AND PARKING GARAGE DECKS |
ASTM C 1375 : 2000 : R2005 | Standard Guide for Substrates Used in Testing Building Seals and Sealants |
ASTM D 7229 : 2008 : R2013 : EDT 1 | Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor (Withdrawn 2021) |
ASTM E 688 : 1994 : R1999 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing |
ACI 548.9M : 2008 | SPECIFICATION FOR TYPE ES (EPOXY SLURRY) POLYMER OVERLAY FOR BRIDGE AND PARKING GARAGE DECKS |
ACI 309.5R : 2000 | COMPACTION OF ROLLER-COMPACTED CONCRETE |
ASTM C 1797 : 2017 : REDLINE | Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete |
ASTM C 1375 : 2000 : R2014 | Standard Guide for Substrates Used in Testing Building Seals and Sealants |
ASTM C 128 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
ASTM D 5624 : 2013 : REDLINE | Standard Practice for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications |
ASTM D 75 : 2003 | Standard Practice for Sampling Aggregates |
ASTM C 127 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate |
ASTM C 128 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM C 670 : 2015 : REDLINE | Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.