ASTM D 1000 : 2017 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
Available format(s)
PDF
Language(s)
English
Published date
07-01-2017
CONTAINED IN VOL. 10.01, 2017 Defines procedures for testing pressure-sensitive adhesive-coated tapes to be used as electrical insulation.
1.1These test methods cover procedures for testing pressure-sensitive adhesive-coated tapes to be used as electrical insulation. These tapes are classified as follows:
1.1.1Class 1—Non-elastomeric backings made from materials such as:
| Paper, flat or creped, | |
| Fabric, uncoated or coated, | |
| Cellulose ester films, | |
| Polyethylene terephthalate (polyester) films, | |
| Fluorocarbon polymer films, | |
| Composite filament films, | |
| Polyamide films, | |
| Polyimide films, and | |
| Combinations thereof. |
1.1.2Class 2—Elastomeric backings that are characterized by both high stretch and substantial recovery. These backings are made from materials such as:
| Vinyl chloride and co-polymers, | |
| Vinylidene chloride and co-polymers, and | |
| Polyethylene and co-polymers. |
1.2Test laminates of Class 1 and Class 2 backings according to Class 1 test methods.
1.3The procedures appear in the sections indicated below and in alphabetical order:
| Adhesion Strength to Steel and Backing at Room Temperature | 46 – 53 |
| Adhesion Strength to Steel and Backing at Low Temperatures | 46 – 53 |
| Bond Strength After Solvent Immersion | 110 – 115 |
| Breaking Strength and Elongation at Room Temperature | 37 – 45 |
| Breaking Strength and Elongation at Low Temperatures | 37 – 45 |
| Conditioning | 6 – 8 |
| Curling and Twisting | 140 – 146 |
| Dielectric Breakdown Voltage | 83 – 90 |
| Effect of Accelerated Aging on High-Temperature Tapes | 97 – 103 |
| Flagging | 66 – 76 |
| Flammability | 104 – 109 |
| Hazards/Precautions | 3 |
| Insulation Resistance at High Humidity | 91 – 96 |
| Length of Tape in a Roll | 28 – 36 |
| Oil Resistance | 116 – 122 |
| Puncture Resistance | 123 – 128 |
| Resistance to Accelerated Aging (Heat and Moisture) | 129 – 139 |
| Sampling | 4 |
| Specimen Preparation | 5 |
| Thermosetting Properties | 77 – 82 |
| Thickness | 21 – 27 |
| Unwind Force at Room Temperature | 54 – 65 |
| Unwind Force at Low Temperatures | 54 – 65 |
| Width | 11 – 20 |
Note 1:These procedures apply to both Class 1 and Class 2 tapes except as noted above.
1.4This is a fire-test response standard (see Section 104).
1.5The values stated in SI units are the standard, unless otherwise noted. If a value for measurement is followed by a value in inch-pound or English units in parentheses, it is likely that the second value will only be approximate and it is for information only. The first stated value is the preferred unit.
Note 2:These test methods are similar to IEC 60454–3, but may differ sometimes in some details.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazards see Section 3.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
D 09
|
| DocumentType |
Redline
|
| Pages |
27
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| CSA C22.2 No. 74 : 2016 | EQUIPMENT FOR USE WITH ELECTRIC DISCHARGE LAMPS |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| ASTM D 2293 : 1996 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| NACE RP 03 75 : 2006 | FIELD-APPLIED UNDERGROUND WAX COATING SYSTEMS FOR UNDERGROUND PIPELINES: APPLICATION, PERFORMANCE, AND QUALITY CONTROL |
| ASTM D 4592 : 2012 | Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life |
| A-A-56019 Base Document:1989 | TAPE, PRESSURE-SENSITIVE, FLUORINATED ETHYLENE-PROPYLENE |
| ASTM D 2293 : 1996 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2294 : 1996 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| CSA C22.2 No. 37 : 2017 | DECORATIVE LIGHTING PRODUCTS |
| ASTM D 2310 : 2006 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2303 : 1997 : R2004 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2318 : 1998 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2308 : 2007 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| MIL-D-47225 Base Document:1974 | DISC, PLASTIC, POLYETHYLENE TEREPHTHALATE, PRESSURE SENSITIVE, ADHESIVE COATED |
| ASTM D 2300 : 2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2293 : 1996 : R2002 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2484 : 2006 : R2012 : EDT 1 | Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape (Withdrawn 2020) |
| ASTM D 3611 : 2006 : R2019 | Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes |
| AWWA C225 : 2014 | FUSED POLYOLEFIN COATINGS FOR STEEL WATER PIPE |
| IEC 62090:2017 | Product package labels for electronic components using bar code and two-dimensional symbologies |
| I.S. EN 62090:2017 | PRODUCT PACKAGE LABELS FOR ELECTRONIC COMPONENTS USING BAR CODE AND TWO-DIMENSIONAL SYMBOLOGIES |
| ISO 28219:2017 | Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols |
| BS EN 6049-008:2017 | Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55 °C to 200 °C. Product standard |
| ASTM D 2148 : 2013-11 | TEST METHODS FOR BONDABLE SILICONE RUBBER TAPES USED FOR ELECTRICAL INSULATION |
| ASTM F 2992/F2992M : 2015 | Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with Tomodynamometer (TDM-100) Test Equipment |
| ASTM D 4505 : 2012 : R2017 | Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life |
| ASTM D 2510 : 1994 : R2012 | Standard Test Method for Adhesion of Solid Film Lubricants |
| EN 62090:2017 | Product package labels for electronic components using bar code and two- dimensional symbologies |
| HH-I-595 Revision C:1976 | INSULATION TAPE, ELECTRICAL, PRESSURE-SENSITIVE ADHESIVE, PLASTIC |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| 14/30300605 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| ASTM D 2850 : 2003 : REV A | Standard Test Method for Unconsolidated-Undrained Triaxial CompressionTest on Cohesive Soils |
| CSA E968 : 1999 | SELF-BALLASTED LAMPS FOR GENERAL LIGHTING SERVICES - SAFETY REQUIREMENTS |
| ASTM D 2301 : 2010 | Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape |
| SAE AMS 3807 : 2016 | TAPE, ALUMINUM FOIL, SOUND AND VIBRATION DAMPING, PRESSURE SENSITIVE ADHESIVE |
| ASTM D 2318 : 1998 : R2003 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2295 : 1996 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2510 : 1994 : R1998 | Standard Test Method for Adhesion of Solid Film Lubricants |
| ASTM D 2295 : 1996 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2303 : 1997 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| CSA C22.2 No. 9.0 : 1996 : R2011 | GENERAL REQUIREMENTS FOR LUMINAIRES |
| ASTM D 2288 : 1997 : R2001 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2850 : 2003 : REV A : R2007 | Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils |
| ASTM D 2293 : 1996 : R2016 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2300 : 2008 : R2017 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| CSA Z662 PACKAGE : 2011 | CONSISTS OF Z662-11, OIL AND GAS PIPELINE SYSTEMS AND Z662.1-11, COMMENTARY ON CSA Z662-11, OIL AND GAS PIPELINE SYSTEMS |
| ASTM D 2296 : 2001 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2295 : 1996 : R2016 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ANSI/AWWA C216 : 2015 | HEAT-SHRINKABLE CROSS-LINKED POLYOLEFIN COATINGS FOR STEEL WATER PIPE AND FITTINGS |
| ASTM C 1423 : 2016 : REDLINE | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| ASTM D 2301 : 2010 : R2017 | Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape |
| ASTM F 2896 : 2011 : R2017 | Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids |
| ASTM D 3006 : 2010 : R2017 | Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape (Withdrawn 2022) |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| 03/106712 DC : 0 | IEC 62326-3 ED.1.0 - PRINTED BOARDS - PART 3: SAFETY CERTIFICATION OF RIGID PRINTED CIRCUIT BOARDS FOR ELECTRONIC ASSEMBLIES |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| ASTM D 2307 : 2007 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 4505 : 2012 | Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life |
| 07/30083514 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| SAE AMS 3809 : 2015 | TAPE, ADHESIVE, PRESSURE-SENSITIVE, DOUBLE-FACED, CARPET TIE DOWN |
| MIL-T-47248 Revision A:1991 | TAPE, PLASTIC, HEAT-SEALING, PERFORATED |
| ASTM C 1775 : 2014 : REDLINE | Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications |
| L-T-1512 Revision A:1975 | TAPE, PRESSURE SENSITIVE ADHESIVE, PIPE WRAPPING |
| ASTM D 2510 : 1994 : R2017 | Standard Test Method for Adhesion of Solid Film Lubricants |
| BS EN 62090:2017 | Product package labels for electronic components using bar code and two- dimensional symbologies |
| ASTM D 2484 : 2006 | Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape |
| ASTM D 2288 : 1997 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| AWWA C215 : 2016 | EXTRUDED POLYOLEFIN COATINGS FOR STEEL WATER PIPE |
| ASTM D 2307 : 2007A | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2301 : 2010 : R2017 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2295 : 1996 : R2002 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2288 : 1997 : R2001 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2318 : 1998 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| CAN/CSA-Z662-15 | Oil and gas pipeline systems |
| ASTM D 2754 : 2010 | Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape |
| ASTM D 876 : 2013 : REDLINE | Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation |
| ASTM D 3611 : 2006 : R2011 | Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes |
| CSA C22.2 No. 9.0 : 1996 : INC : SUP P1 : 1997 : R2016 | GENERAL REQUIREMENTS FOR LUMINAIRES |
| ASTM D 2686 : 2006 : R2012 | Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape |
| ASTM D 3006 : 2010 | Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| UL 1993:5ED 2017-01 | Self-Ballasted Lamps and Lamp Adapters |
| UL 1786:4ED 2014-12 | Direct Plug-In Nightlights |
| C22.2 NO. 1993-17 | Self-ballasted lamps and lamp adapters (Trinational standard with NMX-J-578/1-ANCE and UL 1993) |
| ASTM D 2754 : 2010 : R2016 | Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape (Withdrawn 2022) |
| ASTM D 2296 : 2001 : R2006 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| I.S. EN ISO 21809-3:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
| CSA Z245.20 SERIES : 2014 | PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE |
| MIL-T-47326 Base Document:1990 | TAPE, PRESSURE-SENSITIVE ADHESIVE, ALUMINUM-BACKED, ELECTRICALLY CONDUCTIVE |
| BS EN ISO 21809-3:2016 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
| DDD-D-00620 Base Document:1965 | DRAPE, SURGICAL, PLASTIC, STERILE 18 BY 36 INCHES |
| NACE SP 01 09 : 2009 | FIELD APPLICATION OF BONDED TAPE COATINGS FOR EXTERNAL REPAIR, REHABILITATION, AND WELD JOINTS ON BURIED METAL PIPELINES |
| 09/30198786 DC : DRAFT JAN 2009 | BS EN 6049-008 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 008: SELF-WRAPPING SHIELDED (EMI) PROTECTIVE SLEEVE WITH NICKEL COPPER BRAID, FLEXIBLE POST INSTALLATION OPERATING TEMPERATURE FROM 55 DEGREE C TO 200 DEGREE C - PRODUCT STANDARD |
| 15/30334224 DC : 0 | BS EN 6049-008 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION, PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 008: SELF-WRAPPING SHIELDED (EMI) PROTECTIVE SLEEVE WITH NICKEL COPPER BRAID, FLEXIBLE POST INSTALLATION OPERATING TEMPERATURE FROM -55 DEGREE C TO 200 DEGREE C - PRODUCT STANDARD |
| ASTM D 2307 : 2007 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| CSA C22.2 No. 256 : 2014 | DIRECT PLUG-IN NIGHTLIGHTS |
| AWWA C209 : 2013 | COLD-APPLIED TAPE COATINGS FOR STEEL WATER PIPE, SPECIAL SECTIONS, CONNECTIONS, AND FITTINGS |
| ASTM F 1790/F1790M : 2015 : REDLINE | Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with CPP Test Equipment |
| CSA C22.2 No. 250.13 : 2017 | LIGHT EMITTING DIODE (LED) EQUIPMENT FOR LIGHTING APPLICATIONS |
| ASTM D 4592 : 2012 : R2017 | Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life |
| ASTM D 3005 : 2017 : REDLINE | Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape |
| ASTM D 7932 : 2017 | Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments |
| EN 6049-008:2017 | Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55 °C to 200 °C - Product standard |
| EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| TT-C-494 Revision B:1985 | COATING COMPOUND, BITUMINOUS, SOLVENT TYPE, ACID RESISTANT |
| ANSI/AWWA C229 : 2015 | FUSION-BONDED POLYETHYLENE COATINGS FOR STEEL WATER PIPE AND FITTINGS |
| ASTM D 2308 : 2007 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| BS ISO 28219:2017 | Packaging. Labelling and direct product marking with linear bar code and two-dimensional symbols |
| ASTM D 2319/D2319M : 1998 : R2008e1 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| AWWA C217 : 2016 | MICROCRYSTALLINE WAX AND PETROLATUM TAPE COATING SYSTEMS FOR STEEL WATER PIPE AND FITTINGS |
| AWWA C214 : 2014 | TAPE COATINGS FOR STEEL WATER PIPE |
| ASTM D 3611 : 2006 | Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes |
| NACE RP 03 03 : 2003 | FIELD-APPLIED HEAT-SHRINKABLE SLEEVES FOR PIPELINES: APPLICATION, PERFORMANCE, AND QUALITY CONTROL |
| MIL-I-3825 Revision B:1965 | INSULATING TAPE, ELECTRICAL, SELF FUSING FOR USE IN ELECTRONIC COMMUNICATIONS AND ALLIED EQUIPMENT |
| 16/30333617 DC : 0 | BS EN 62090 - PRODUCT PACKAGE LABELS FOR ELECTRONIC COMPONENTS USING BAR CODE AND TWO-DIMENSIONAL SYMBOLOGIES |
| ASTM D 2307 : 2007A : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2319/D2319M : 1998 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2294 : 1996 : R2016 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| A-A-2106 Revision A:1982 | PAPER, PROTECTIVE, ADHESIVE |
| ASTM D 2310 : 2006 : R2012 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| MIL-I-24391 Revision C:1990 | INSULATION TAPE, ELECTRICAL, PLASTIC, PRESSURE SENSITIVE |
| ASTM D 2301 : 2010 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2294 : 1996 : R2002 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM C 474 : 2015 : REDLINE | Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction |
| PREN 6049-008 : 200P3 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 008: SELF-WRAPPING SHIELDED (EMI) PROTECTIVE SLEEVE WITH NICKEL COPPER BRAID, FLEXIBLE POST INSTALLATION OPERATING TEMPERATURE FROM -55 DEGREES C TO 200 DEGREES C - PRODUCT STANDARD |
| NACE SP 01 85 : 2007 | EXTRUDED POLYOLEFIN RESIN COATING SYSTEMS WITH SOFT ADHESIVES FOR UNDERGROUND OR SUBMERGED PIPE |
| UNE-EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| I.S. EN 6049-008:2017 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTIVE SLEEVES IN META-ARAMID FIBRES - PART 008: SELF-WRAPPING SHIELDED (EMI) PROTECTIVE SLEEVE WITH NICKEL COPPER BRAID, FLEXIBLE POST INSTALLATION OPERATING TEMPERATURE FROM -55 DEGREES C TO 200 DEGREES C - PRODUCT STANDARD |
| ASTM D 2510 : 1994 : R2006 | Standard Test Method for Adhesion of Solid Film Lubricants |
| ASTM D 2686 : 2006 | Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape |
| ASTM F 2896 : 2011 | Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids |
| ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 295 : 2012 | Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation (Withdrawn 2020) |
| ASTM A 666 : 2015 : REDLINE | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
| ASTM D 1711 : 2015 : REDLINE | Standard Terminology Relating to Electrical Insulation |
| ASTM D 374/D374M : 2016 | Standard Test Methods for Thickness of Solid Electrical Insulation |
| ASTM D 257 : 2014 : REDLINE | Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
US$83.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.