• There are no items in your cart

ASTM D 1125 : 2023

Current
Current

The latest, up-to-date edition.

Standard Test Methods for Electrical Conductivity and Resistivity of Water
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

04-17-2023

1.1These test methods cover the determination of the electrical conductivity and resistivity of water. The following test methods are included:

Range

Sections

Test Method A—Field and Routine Laboratory

10 to 200 000

12 to 18

 Measurement of Static (Non-Flowing) Samples

 μS/cm

Test Method B—Continuous In-Line Measure

5 to 200 000

19 to 23

 ment

 μS/cm

1.2These test methods have been tested in reagent water. It is the user's responsibility to ensure the validity of these test methods for waters of untested matrices.

1.3For measurements below the range of these test methods, refer to Test Method D5391.

1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 19
DocumentType
Test Method
Pages
8
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM A 623 : 2022 Standard Specification for Tin Mill Products, General Requirements
ASTM G 96 : 1990 : R2018 Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
ASTM D 4266 : 2017 Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
ASTM D 1755 : 2021 Standard Specification for Poly(Vinyl Chloride) Resins
ASTM F 76 : 2008 : R2016 : EDT 1 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors (Withdrawn 2023)
ASTM D 2651 : 2001 : R2016 Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
ASTM D 7100 : 2011 : R2020 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
ASTM D 5744 : 2018 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM C 1663 : 2018 Standard Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test
ASTM D 6764 : 2002 : R2019 Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels
ASTM E 1943 : 1998 : R2015 Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites
ASTM D 6504 : 2011 : R2016 : EDT 1 Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water
ASTM D 4399 : 2005 : R2017 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM F 1701 : 2012 : R2018 Standard Specification for Unused Rope with Special Electrical Properties
ASTM D 3375 : 2018 Standard Test Method for Column Capacity of Particulate Mixed Bed Ion<brk/>Exchange Materials
ASTM E 574 : 2019 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
ASTM D 3087 : 2017 Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
ASTM B 679 : 1998 : R2021 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
ASTM C 225 : 1985 : R2022 Standard Test Methods for Resistance of Glass Containers to Chemical Attack
ASTM B 488 : 2018 Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
ASTM D 4194 : 2023 Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices
ASTM A 630 : 2016 : REV A : EDT 1 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM D 5298 : 2016 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
ASTM D 5615 : 2021 Standard Practice for Operating Characteristics of Home Reverse Osmosis Devices
ASTM D 8006 : 2016 Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations
ASTM G 205 : 2016 Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils
ASTM D 5196 : 2006 : R2018 Standard Guide for Bio-Applications Grade Water
ASTM D 7513 : 2017 Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges
ASTM D 4519 : 2016 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
ASTM D 7285 : 2006 : R2017 Standard Guide for Recordkeeping Microfiltration and Ultrafiltration Systems
ASTM D 5012 : 2020 Standard Practice for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
ASTM D 6529 : 2022 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50 μS/cm to 1000 μS/cm
ASTM D 7283 : 2017 Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting
ASTM D 6807 : 2017 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from<brk/>2 to 100 μS/cm
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM A 657/A657M : 2018 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
ASTM B 984 : 2012 : R2020 : EDT 1 Standard Specification for Electrodeposited Coatings of Palladium-Cobalt Alloy for Engineering Use

ASTM D 5391 : 2023 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM D 1129 : 2013 : R2020 : EDT 2 Standard Terminology Relating to Water
ASTM D 1129 : 2013 : R2020 : EDT 1 Standard Terminology Relating to Water

View more information
US$63.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.