• There are no items in your cart

ASTM D 1217 : 2015 : REDLINE

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
Available format(s)

PDF

Superseded date

06-13-2020

Language(s)

English

Published date

12-01-2015

CONTAINED IN VOL. 05.01, 2016 Defines the measurement of the density of pure hydrocarbons or petroleum distillates boiling between 90 degrees C and 110 degrees C that can be handled in a normal fashion as a liquid at the specified test temperatures of 20 degrees C and 25 degrees C.

1.1This test method covers the measurement of the density of pure hydrocarbons or petroleum distillates boiling between 90 °C and 110 °C that can be handled in a normal fashion as a liquid at the specified test temperatures of 20 °C and 25 °C.

1.2This test method provides a calculation procedure for the conversion of density to relative density (specific gravity).

1.3WARNING—Mercury has been designated by many regulatory agencies as a hazardous material that can cause central nervous system, kidney and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPA’s website—http://www.epa.gov/mercury/faq.htm—for additional information. Users should be aware that selling mercury and/or mercury containing products in your state or country may be prohibited by law.

1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific warning statements are given in Section 7.

Committee
D 02
DocumentType
Redline
Pages
7
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

ASTM B 963 : 2017 : REDLINE Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
ASTM E 201 : 1996 Test Method for Calculation of Volume and Weight of Industrial Chemical Liquids (Withdrawn 2001)
ASTM D 2892 : 2017-05 TEST METHOD FOR DISTILLATION OF CRUDE PETROLEUM (15-THEORETICAL PLATE COLUMN)
ASTM D 1555M : 2016 : REDLINE Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
ASTM D 1555 : 2016 : REDLINE Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
ASTM D 6448 : 2016 : REDLINE Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
ASTM C 729 : 2011 : R2016 Standard Test Method for Density of Glass by the Sink-Float Comparator
ISO 9940:2015 Aerospace series Fluid, hydraulic, phosphate ester-base, fire resistant Technical specification
ASTM D 4529 : 2017 : REDLINE Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 1481 : 2017 : REDLINE Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D 2994 : 1998 Standard Test Methods for Rubberized Tar (Withdrawn 2000)
12/30234431 DC : 0 BS ISO 9940 - AEROSPACE - FIRE RESISTANT HYDRAULIC FLUIDS
API MPM CH9.4 : 2018 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 9.4 - CONTINUOUS DENSITY MEASUREMENT UNDER DYNAMIC (FLOWING) CONDITIONS
ASTM C 729 : 2011 Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM D 5002 : 2016-02 TEST METHOD FOR DENSITY AND RELATIVE DENSITY OF CRUDE OILS BY DIGITAL DENSITY ANALYZER
SAE AS 1241 : 2016 FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT
ASTM D 2766 : 1995 : R2009 Standard Test Method for Specific Heat of Liquids and Solids (Withdrawn 2018)
ASTM D 5236 : 2017-05 TEST METHOD FOR DISTILLATION OF HEAVY HYDROCARBON MIXTURES (VACUUM POTSTILL METHOD)
BS ISO 9940:2015 Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification
ASTM D 1480 : 2015 : REDLINE Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
MIL-T-63466 Base Document:1981 THIONYL CHLORIDE (FOR USE IN AMMUNITION)
ASTM D 2766 : 1995 : R2005 Standard Test Method for Specific Heat of Liquids and Solids
13/30290460 DC : 0 BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION
14/30302298 DC : 0 BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION
ASTM D 276 : 2012 : REDLINE Standard Test Methods for Identification of Fibers in Textiles
MIL-L-60326 Base Document:1965 LUBRICANT, FLUOROCARBON TELOMER DISPERSION (FOR USE WITH AMMUNITION)
ISO/TR 19686-2:2018 Petroleum products — Equivalency of test method determining the same property — Part 2: Density of petroleum products
ASTM D 2766 : 1995 Standard Test Method for Specific Heat of Liquids and Solids
ASTM D 1405/D1405M : 2008 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
MIL-C-81947 Revision A:1975 COATING COMPOUND, THERMAL INSULATION, THREE-COMPONENT, INTUMESCENT
ASTM D 2766 : 1995 : R2000 Standard Test Method for Specific Heat of Liquids and Solids
SAE ARP 4990B : 2015 TURBINE FLOWMETER FUEL FLOW CALCULATIONS
ASTM D 471 : 2016-02 TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS
ASTM D 1405/D1405M : 2008 : R2013 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels (Withdrawn 2019)
ASTM D 4624 : 1993 : R1998 Standard Test Method for Measuring Apparent Viscosity by Capillary Viscometer at High Temperature and High-Shear Rates (Withdrawn 2004)

ASTM E 1 : 2014 : REDLINE Standard Specification for ASTM Liquid-in-Glass Thermometers

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.