• There are no items in your cart

ASTM D 1356 : 2000 : REV A

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Terminology Relating to Sampling and Analysis of Atmospheres
Available format(s)

Hardcopy , PDF

Superseded date

11-11-2014

Language(s)

English

Published date

11-10-2000

1.1 This terminology is a collective vocabulary relating to sampling and analysis of atmospheres. As a convenience to general interest, it contains most of the standard terms, definitions, and nomenclature under the jurisdiction of Committee D22.

1.2 Many of the entries in this terminology are copied (with attribution) from the standards of origin referenced in Section 2. The standards of origin are noted in bold type at the right margin of the applicable definition.

1.3 Certain terms in the common language that comprise multiple concepts are included herein with the definition specific to standard and practices of Committee D22.

Committee
D 22
DocumentType
Reference Material
Pages
14
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

ASTM D 8141 : 2017 Standard Guide for Selecting Volatile Organic Compounds (VOCs) and Semi-Volatile Organic Compounds (SVOCs) Emission Testing Methods to Determine Emission Parameters for Modeling of Indoor Environments
ASTM D 5932 : 2008 : R2013 : EDT 1 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
ASTM D 5015 : 2015 Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM E 104 : 2002 : R2012 Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions
ASTM D 7049 : 2017 Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres
ASTM D 5149 : 2002 : R2016 Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
ASTM D 4597 : 2010 : R2015 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
ASTM D 3266 : 1991 : R2018 Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
ASTM D 5466 : 2015 Standard Test Method for Determination of Volatile Organic Compounds in Atmospheres (Canister Sampling Methodology)
ASTM E 631 : 2015 Standard Terminology of Building Constructions
ASTM D 7707 : 2011 : R2016 Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust
ASTM D 3608 : 2019 Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction
ASTM D 3270 : 2013 Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
ASTM D 2914 : 2015 Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
ASTM D 6060 : 2017 Standard Test Method for Sampling of Process Vents with a Portable Gas Chromatograph
ASTM D 5280 : 1996 : R2013 Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
ASTM D 5012 : 2001 : R2013 Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
ASTM D 4844 : 2016 Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection
ASTM D 5085 : 2002 : R2013 Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
ASTM D 5337 : 2011 : R2016 Standard Practice for Flow Rate Adjustment of Personal Sampling Pumps
ASTM D 6669 : 2019 Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints
ASTM D 6333 : 2017 Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors
ASTM D 7297 : 2014 Standard Practice for Evaluating Residential Indoor Air Quality Concerns
ASTM D 6271 : 2010 : R2016 Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol (Withdrawn 2022)
ASTM D 6589 : 2005 : R2015 Standard Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance
ASTM D 3686 : 2013 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
ASTM D 6494 : 1999 : R2015 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM D 5741 : 1996 : R2017 Standard Practice for Characterizing Surface Wind Using a Wind Vane and Rotating Anemometer
ASTM D 6058 : 1996 : R2016 Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
ASTM E 2144 : 2011 : R2016 Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
ASTM E 1370 : 2014 Standard Guide for Air Sampling Strategies for Worker and Workplace Protection
ASTM D 6062 : 2019 Standard Guide for Personal Samplers of Health-Related Aerosol Fractions
ASTM D 6196 : 2015 : EDT 1 Standard Practice for Choosing Sorbents, Sampling Parameters and Thermal Desorption Analytical Conditions for Monitoring Volatile Organic Chemicals in Air
ASTM E 2523 : 2013 : R2018 Standard Terminology for Metalworking Fluids and Operations
ASTM D 7712 : 2018 Standard Terminology for Sampling and Analysis of Asbestos
ASTM D 4861 : 2017 Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air (Withdrawn 2021)
ASTM D 6328 : 2018 Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition
ASTM D 6877 : 2013 : R2018 Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
ASTM D 6246 : 2008 : R2018 Standard Practice for Evaluating the Performance of Diffusive Samplers
ASTM E 2114 : 2019 Standard Terminology for Sustainability Relative to the Performance of Buildings
ASTM D 6485 : 2018 Standard Guide for Risk Characterization of Acute and Irritant Effects of Short-Term Exposure to Volatile Organic Chemicals Emitted from Bedding Sets (Withdrawn 2024)
ASTM D 4765 : 2013 : R2018 Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes
ASTM D 3268 : 1991 : R2018 Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
ASTM D 7295 : 2018 Standard Practice for Sampling Combustion Effluents and Other Stationary Sources for the Subsequent Determination of Hydrogen Cyanide
ASTM D 6831 : 2011 : R2018 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D 6399 : 2018 Standard Guide for Selecting Instruments and Methods for Measuring Air Quality in Aircraft Cabins
ASTM D 7663 : 2012 : R2018 : EDT 1 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
ASTM D 1607 : 1991 : R2018 : EDT 1 Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction)
ASTM D 4599 : 2014 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM D 7296 : 2018 Standard Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds
ASTM D 5096 : 2002 : R2017 Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer
ASTM D 5835 : 1995 : R2013 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM D 5578 : 2004 : R2015 Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)
ASTM D 5197 : 2016 Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)
ASTM D 3631 : 1999 : R2017 Standard Test Methods for Measuring Surface Atmospheric Pressure
ASTM D 8208 : 2019 Standard Practice for Collection of Non-Fibrous Nanoparticles Using a Nanoparticle Respiratory Deposition (NRD) Sampler
ASTM D 5955 : 2002 : R2017 : EDT 1 Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM (Withdrawn 2022)
ASTM D 4600 : 1995 : R2016 Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D 5953M : 2016 Standard Test Method for Determination of Non-methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection
ASTM D 7910 : 2014 Standard Practice for Collection of Fungal Material From Surfaces by Tape Lift
ASTM D 5791 : 1995 : R2017 Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
ASTM D 6331 : 2016 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D 3796 : 2009 : R2016 Standard Practice for Calibration of Type S Pitot Tubes
ASTM D 5366 : 1996 : R2017 Standard Test Method for Determining the Dynamic Performance of a Wind Vane
ASTM D 5156 : 2002 : R2016 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
ASTM E 800 : 2014 Standard Guide for Measurement of Gases Present or Generated During Fires
ASTM D 3609 : 2000 : R2014 Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM D 7658 : 2017 Standard Test Method for Direct Microscopy of Fungal Structures from Tape
ASTM D 7911 : 2014 Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test
ASTM E 2889 : 2012 : R2017 Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment
ASTM D 7520 : 2016 Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
ASTM D 7706 : 2017 Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers
ASTM D 7822 : 2018 Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids
ASTM D 7392 : 2007 : R2013 Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants
ASTM D 6363 : 1998 : R2013 Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method
ASTM E 1620 : 1997 : R2016 Standard Terminology Relating to Liquid Particles and Atomization
ASTM D 6348 : 2012 : EDT 1 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
ASTM D 7789 : 2012 Standard Practice for Collection of Fungal Material from Surfaces by Swab
ASTM D 8142 : 2017 Standard Test Method for Determining Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation using Micro-Scale Environmental Test Chambers
ASTM D 7144 : 2005 : REV A : R2016 Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
ASTM D 2010/D2010M : 1998 : R2017 Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique
ASTM D 7145 : 2005 : R2015 Standard Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means
ASTM D 4766 : 1998 : R2014 Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)
ASTM D 6620 : 2019 Standard Practice for Asbestos Detection Limit Based on Counts
ASTM D 5110 : 1998 : R2017 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
ASTM D 5011 : 2017 Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
ASTM D 5116 : 2017 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products
ASTM D 7758 : 2017 Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations
ASTM D 6245 : 2018 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
ASTM D 7459 : 2008 : R2016 Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources
ASTM D 6061 : 2001 : R2018 : EDT 1 Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers
ASTM D 1357 : 1995 : R2011 Standard Practice for Planning the Sampling of the Ambient Atmosphere
ASTM D 6785 : 2013 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM F 2299/F2299M : 2003 : R2017 Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres
ASTM D 6562 : 2012 Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace
ASTM D 3824 : 2012 Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method
ASTM D 1739 : 1998 : R2017 Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
ASTM D 7143 : 2017 Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products
ASTM D 3162 : 2012 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
ASTM E 1749 : 2018 Standard Terminology Relating to Rigid Wall Relocatable Shelters
ASTM D 3464 : 1996 : R2014 Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM E 1998 : 2011 : R2018 Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
ASTM D 6670 : 2018 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products
ASTM D 4532 : 2015 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
ASTM D 6209 : 2013 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
ASTM D 5075 : 2001 : R2017 : EDT 1 Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air
ASTM D 6177 : 2014 Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets
ASTM D 6329 : 1998 : R2015 Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
ASTM D 3154 : 2014 Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)
ASTM D 6552 : 2006 : R2016 Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
ASTM D 6420 : 2018 Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
ASTM D 5527 : 2000 : R2017 : EDT 1 Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means
ASTM D 6281 : 2015 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
ASTM D 6522 : 2011 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
ASTM D 7439 : 2014 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
ASTM D 4185 : 2017 Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
ASTM D 7200 : 2012 Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy (Withdrawn 2021)
ASTM D 7339 : 2018 Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography
ASTM E 2148 : 2016 Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
ASTM D 7659 : 2010 : R2015 Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
ASTM D 6056 : 1996 : R2011 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy (Withdrawn 2020)
ASTM D 7036 : 2016 Standard Practice for Competence of Air Emission Testing Bodies
ASTM D 7201 : 2006 : R2011 Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)
ASTM D 5836 : 2008 : R2013 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)
ASTM D 3687 : 2007 : R2012 Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
ASTM D 6784 : 2016 Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
ASTM D 4298 : 2004 : R2014 : EDT 1 Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
ASTM D 5438 : 2017 Standard Practice for Collection of Floor Dust for Chemical Analysis
ASTM D 7614 : 2012 Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements
ASTM D 5111 : 2012 Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations
ASTM E 337 : 2015 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM D 7948 : 2014 : EDT 1 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
ASTM D 4490 : 1996 : R2016 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM D 4430 : 2000 : R2015 Standard Practice for Determining the Operational Comparability of Meteorological Measurements
ASTM E 2267 : 2004 : R2013 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality (Withdrawn 2022)
ASTM D 6332 : 2012 : R2017 Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
ASTM D 4913 : 2000 : R2016 Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors (Withdrawn 2023)
ASTM D 6011 : 1996 : R2015 Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer
ASTM D 1608 : 2016 Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures) (Withdrawn 2023)
ASTM D 4096 : 2017 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
ASTM D 6327 : 2010 : R2016 Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
ASTM D 6832 : 2013 : R2018 Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide
ASTM D 6059 : 1996 : R2011 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy (Withdrawn 2020)
ASTM D 3685/D3685M : 2013 Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
ASTM D 5086 : 2001 : R2013 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
ASTM F 50 : 2012 : R2015 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
ASTM D 4856 : 2011 : R2016 Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)
ASTM D 6830 : 2002 : R2016 Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media
ASTM D 1914 : 1995 : R2014 Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
ASTM D 4323 : 2015 Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
ASTM D 7034 : 2018 Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations
ASTM D 7788 : 2014 Standard Practice for Collection of Total Airborne Fungal Structures via Inertial Impaction Methodology
ASTM D 6306 : 2017 Standard Guide for Placement and Use of Diffusive Samplers for Gaseous Pollutants in Indoor Air
ASTM D 6561 : 2006 : R2016 Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace
ASTM D 7035 : 2016 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 7202 : 2015 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
ASTM D 4230 : 2002 : R2012 Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D 7859 : 2019 Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers
ASTM D 6803 : 2013 Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers
ASTM D 8068 : 2019 Standard Practice for Collection of Culturable Airborne Fungi or Bacteria on Agar Plates by Inertial Impaction Systems
ASTM D 6966 : 2018 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM D 6057 : 1996 : R2011 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy (Withdrawn 2020)
ASTM D 3195/D3195M : 2010 : R2015 Standard Practice for Rotameter Calibration
ASTM F 1977 : 2004 : R2017 Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
ASTM D 3267 : 2012 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
ASTM E 2693 : 2014 Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment
ASTM D 5952 : 2008 : R2015 Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever) (Withdrawn 2024)
ASTM D 2913 : 2014 Standard Test Method for Mercaptan Content of the Atmosphere
ASTM E 2993 : 2016 Standard Guide for Evaluating Potential Hazard as a Result of Methane in the Vadose Zone
ASTM D 6178 : 2014 Standard Practice for Estimation of Short-term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
ASTM D 6330 : 1998 : R2014 Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions
ASTM D 7440 : 2008 : R2015 : EDT 1 Standard Practice for Characterizing Uncertainty in Air Quality Measurements
ASTM C 1817 : 2016 Standard Test Method for The Determination of the Oxygen to Metal (O/M) Ratio in Sintered Mixed Oxide ((U, Pu)O<inf>2</inf>) Pellets by Gravimetry
ASTM D 3614 : 2007 : R2013 Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions
ASTM D 5157 : 1997 : R2014 Standard Guide for Statistical Evaluation of Indoor Air Quality Models
ASTM E 3203 : 2019 Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
ASTM D 3249 : 1995 : R2011 Standard Practice for General Ambient Air Analyzer Procedures
ASTM D 6216 : 2012 Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications
ASTM D 6176 : 1997 : R2015 Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
ASTM D 6480 : 2019 Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.