• There are no items in your cart

ASTM D 1457 : 1992

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996)
Superseded date

02-18-2021

Published date

12-31-2010

CONTAINED IN VOL 08.01 1997 Describes molding and extrusion resins of polytetrafluoroethylene that have not been melted after molding or preforming and which are normally processed in ways like those used in powder metallurgy or by ram extrusion or ceramics or extrusion with a volatile aid.

Committee
ASTM
DevelopmentNote
Supersedes L P 403 (C). (05/2004)
DocumentType
Standard
ProductNote
Supersedes L P 403 (C). (SRI 05/2004)
PublisherName
American Society for Testing and Materials
Status
Superseded
Supersedes

MIL-DTL-55235 Revision A:2003 CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES TPS, GENERAL SPECIFICATION
ASTM D 3960 : 2005 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D 3960 : 2005 : R2013 Standard Practice for Determining Volatile Organic Compound (VOC)Content of Paints and Related Coatings
DIN 65374:1989-11 AEROSPACE; POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS AND MOULDED PARTS; TECHNICAL SPECIFICATION
SAE AS 4388 : 2013 HOSE ASSEMBLY PTFE HEAVY DUTY, -65 TO 400 DEGREES F (-55 TO 204 DEGREES C) 8000 PSI (56000 KPA) HYDRAULIC AND PNEUMATIC
MIL H 26633 : C HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, OXYGEN
MIL-I-23594 Revision C:1988 INSULATION TAPE, ELECTRICAL, HIGH TEMPERATURE, POLYTETRAFLUOROETHYLENE, PRESSURE SENSITIVE
MIL-C-45113 Revision B:1983 COMPOSITION B-3
MIL-DTL-24800 Base Document:1996 CLEANING COMPOUND - AQUEOUS - OXYGEN SYSTEMS COMPONENTS
MIL-C-26637 Revision A:1987 CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES LT
MIL V 24509 : A VALVES, FLANGED, BALL & PLUG FOR SEWAGE & SEA WATER SERVICE
MIL-P-24396 Revision A:1994 PACKING MATERIAL, BRAIDED PTFE (POLYTETRAFLUOROETHYLENE)
MIL I 82736 : A IGNITION PELLETS, MAGNESIUM-FLUOROCARBON
MIL-C-8603 Revision B:1984 CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT
MIL H 83298 : A HOSE, TETRAFLUOROETHYLENE, HIGH TEMPERATURE, HIGH PRESSURE (3000 PSI) HYDRAULIC AND PNEUMATIC
MIL-W-83970 Revision B:1981 WING AND ROLLERON ASSEMBLY AIM-9
MIL H 27267 : B HOSE TETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE
MIL-P-22241 Revision B:1973 PLASTIC SHEET (AND FILM) POLYTETRAFLUOROETHYLENE (TFE-FLUOROCARBON RESIN)
MIL BULL 343 : A DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF
MIL-H-38360 Revision B:1966 HOSE, ASSEMBLIES, TETRAFLUOROETHYLENE, HIGH-TEMPERATURE, HIGH PRESSURE, 3000 PSI HYDRAULIC AND PNEUMATIC
MIL-E-15330 Revision D:1977 EXPANSION JOINT, PIPE, SYNTHETIC RUBBER, FIRE RETARDANT (NAVY)
MIL-T-24388 Revision C:1990 THERMOCOUPLE AND RESISTANCE TEMPERATURE ELEMENT ASSEMBLIES, GENERAL SPECIFICATION FOR (NAVAL SHIPBOARD)
DEFSTAN 47-12/4(1987) : 1987 POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES (WIRE REINFORCED) FOR MEDIUM AND HIGH PRESSURE FLUID SYSTEMS IN AIRCRAFT
MIL P 24074 : B NOTICE 1 POLYTETRAFLUOROETHYLENE PARTS AND COATINGS AND POLYAMIDE PARTS
MIL H 38390 : C HOSE ASSEMBLY, TETRAFLUOROETHYLENE PNEUMATIC, HIGH PRESSURE
MIL C 31031 : 0 CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES GENERAL SPECIFICATION FOR
MIL C 15370 : F COUPLERS, DIRECTIONAL GENERAL SPECIFICATION FOR
MIL S 8516 : F SEALING COMPOUND, POLYSULFIDE RUBBER, ELECTRIC CONNECTORS AND ELECTRICAL SYSTEMS CHEMICALLY CURED
MIL-PRF-82736 Revision A:1988 IGNITION PELLETS, MAGNESIUM-FLUOROCARBON
MIL-T-55155 Revision C:1993 TERMINALS, FEEDTHRU (INSULATED) AND TERMINALS, STUD (INSULATED AND NONINSULATED), GENERAL SPECIFICATION FOR
SAEITC TSC 47-012 ISSUE 4:2018 POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES (WIRE REINFORCED) FOR MEDIUM AND HIGH PRESSURE FLUID SYSTEMS IN AIRCRAFT
MIL-P-82810 Base Document:1986
MIL C 27072 : B CABLE, POWER, ELECTRICAL & CABLE, SPECIAL PURPOSE ELECTRICAL, MULTICONDUCTOR & SINGLE-SHIELDED - GENERAL SPECIFICATION FOR
MIL H 85800 : 0 HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID FIBER REINFORCED, 5000 & 8000 PSI, GENERAL SPECIFICATION FOR
MIL-A-24780 Base Document:1992 ACTUATING ASSEMBLY, SINGLE LINEAR MOTION, FOR THE REMOTE ACTUATION OF QUICK ACTING VALVES, GENERAL SPECIFICATION FOR
MIL-P-48296 Base Document:1974 POLYTETRAFLUOROETHYLENE (PTFE)
MIL-DTL-22529 Revision D:1996 GROMMET, EDGING
MIL-PRF-8516 Revision G:1997 SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED
ASTM D 4967 : 1999 Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables
ASTM D 4967 : 1999 : R2009 Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables
ASTM D 3960 : 2005 : R2018 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM E 911 : 1998 : R2015 Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
ASTM E 911 : 1998 Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
ASTM E 911 : 1998 : R2009 Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
ASTM D 5577 : 1994 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
ASTM E 911 : 1998 : R2004 Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
ASTM D 5977 : 2015 : REDLINE Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures
ASTM D 5577 : 1994 : R2003 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D 5577 : 1994 : R2010 : EDT 1 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics (Withdrawn 2019)
ASTM D 4967 : 1999 : R2013 Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables
ASTM F 1109 : 1987 Specification for Porous Composites of Polytetrafluoroethylene and Carbon for Surgical Implant Applications (Withdrawn 1993)
ASTM D 5212 : 2003 Standard Specification for High Load Rotational Confined Elastomeric Bearings for Bridges and Structures (Withdrawn 2004)
ASTM F 423 : 1995 Standard Specification for Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges (Withdrawn 2002)
ASTM F 1545 : 2015 : REV A Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
ASTM E 911 : 1998 : R2021 Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
ASTM D 5977 : 2015 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures
ASTM D 5577 : 2019 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
SAE MA 1975 : 2015 HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID REINFORCED, 135 DEGREE C, STANDARD DUTY, 28000/21000 KPA, HYDRAULIC, AIRCRAFT SYSTEMS
ASTM D 4967 : 1999 : R2004 : EDT 1 Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables
SAE MA 2007A : 2015 HOSE ASSEMBLY, TETRAFLUOROETHYLENE, LIGHTWEIGHT, 204 DEGREE C, 21000 KPA HYDRAULIC, METRIC

ASTM E 380 : 1993 Standard Practice for Use of the Internation System of Units (SI) (the Modernized Metric System) (Withdrawn 1997)
ASTM D 618 : 2013 : REDLINE Standard Practice for Conditioning Plastics for Testing
ASTM E 177 : 2014 : REDLINE Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM D 792 : 2013 : REDLINE Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D 3297 : 1993 Practice for Molding and Machining Tolerances for PTFE Resin Parts (Withdrawn 1997)
ASTM E 11 : 2017 : REDLINE Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
MIL-STD-105 Revision E:1989 SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES
ASTM D 638 : 2014 : REDLINE Standard Test Method for Tensile Properties of Plastics
ASTM D 1895 : 2017 : REDLINE Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
ASTM D 3892 : 2015 : REDLINE PRACTICE FOR PACKAGING/PACKING OF PLASTICS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.