ASTM D 1566 : 2015 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
07-22-2019
English
12-01-2015
CONTAINED IN VOL. 09.01, 2015 Gives definitions of technical terms used in the rubber industry.
Committee |
D 11
|
DocumentType |
Redline
|
Pages |
34
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
ASTM D 3393 : 1991 : R2014 | Standard Specification for Coated Fabrics—Waterproofness |
MIL PRF 11891 : F | TRACK SHOE SETS, TRACK SHOE ASSEMBLIES, TRACK SHOE PADS AND TRACK SHOE BUSHINGS, VEHICULAR - ELASTOMERIZED |
ASTM D 3903 : 2015 : REDLINE | Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems |
ASTM C 923 : 2008 : R2013 | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals |
ASTM D 6338 : 2017 : REDLINE | Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods |
ASTM D 3832 : 1979 : R2011 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
ASTM D 6370 : 1999 : R2003 | Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA) |
ASTM F 477 : 2014 : REDLINE | Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
ASTM F 2038 : 2000 : EDT 1 | Standard Guide for Silicone Elastomers, Gels and Foams Used in Medical Applications Part I - Formulations and Uncured Materials |
ANSI/AWWA D110:2013(R2018) | WIRE- AND STRAND-WOUND, CIRCULAR, PRESTRESSED CONCRETE WATER TANKS |
ASTM D 6244 : 2006 | Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains |
ASTM F 2946 : 2012 : R2017 | Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes |
ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM F 1344 : 2015 : REDLINE | Standard Specification for Rubber Floor Tile |
ASTM F 2038 : 2000 | Standard Guide for Silicone Elastomers, Gels and Foams Used in Medical Applications Part I - Formulations and Uncured Materials |
ASTM D 5992 : 1996 : R2006 : EDT 1 | Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods |
ASTM C 1478 : 2008 : R2013 | Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals |
ASTM F 913 : 2002 : R2008 | Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
ASTM D 2229 : 2010 | Standard Test Method for Adhesion Between Steel Tire Cords and Rubber |
ASTM D 6270 : 2017 : REDLINE | Standard Practice for Use of Scrap Tires in Civil Engineering Applications |
ASTM C 923 : 2008 : R2013 : EDT 1 | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals |
ASTM D 5869 : 2007 : REV A | Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
ASTM C 1523 : 2017 : REDLINE | Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants |
ASTM D 6048 : 2007 : R2018 | Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers |
ASTM F 2468 : 2005 : R2011 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
ASTM C 1518 : 2016 : REDLINE | Standard Specification for Precured Elastomeric Silicone Joint Sealants |
ASTM D 5603 : 2001 : R2015 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
ASTM F 1494 : 2014 : REDLINE | Standard Terminology Relating to Protective Clothing |
ASTM D 3853 : 2012 : R2017 | Standard Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in Compounding |
ASTM D 1871 : 2004 : R2014 | Standard Test Method for Adhesion Between Tire Bead Wire and Rubber (Withdrawn 2023) |
ASTM D 7999 : 2015 | Standard Classification for Rubber Products in Natural Gas Pipeline Applications |
ANSI/CSA AMERICA FC 3-2004 (R2017) | PORTABLE FUEL CELL POWER SYSTEMS |
CSA FC 3 : 2004 | PORTABLE FUEL CELL POWER SYSTEMS |
ASTM D 5992 : 1996 : R2001 : EDT 1 | Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods |
ASTM D 5869 : 2007 | Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
ASTM D 3832 : 1979 : R2006 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
ASTM C 1115 : 2017 : REDLINE | Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories |
ASTM D 5644 : 2001 : R2013 | Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
ASTM D 5289 : 2017 : REDLINE | TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING ROTORLESS CURE METERS |
ASTM D 5603 : 2001 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
ASTM D 2229 : 2010 : R2014 | Standard Test Method for Adhesion Between Steel Tire Cords and Rubber (Withdrawn 2023) |
ASTM F 2042 : 2000 : R2005 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication |
ASTM D 8059 : 2016 | Standard Test Method for Rubber Compounds—Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers |
ASTM F 2042 : 2000 : EDT 1 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication |
ASTM D 3952 : 1987 : R1993 | Specification for Rubber Hose Used in Solar Energy Systems (Withdrawn 1997) |
ASTM D 864 : 1952 : R1978 | Method of Test for Coefficient of Cubical Thermal Expansion of Plastics |
ASTM F 1861 : 2016 : REDLINE | Standard Specification for Resilient Wall Base |
ASTM E 2203 : 2014 : R2018 | Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories |
ASTM C 1644 : 2006 : R2017 | Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes |
ASTM C 1478M : 2008 | Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric) |
ASTM D 832 : 2007 : R2018 | Standard Practice for Rubber Conditioning For Low Temperature Testing |
ASTM D 832 : 2007 : R2012 | Standard Practice for Rubber Conditioning For Low Temperature Testing |
ASTM F 3041 : 2014 | Standard Specification for Bonded Rubber Crumb Floor Coverings |
ASTM C 923M : 2008 : REV B : R2013 | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric) |
ASTM D 5992 : 1996 : R2011 | Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods |
ASTM C 1478 : 2008 | Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals |
ASTM F 2510/F2510M : 2017 : REDLINE | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene Pipes |
ASTM C 1619 : 2011 | Standard Specification for Elastomeric Seals for Joining Concrete Structures |
ASTM C 864 : 2005 | Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers |
ASTM D 3393 : 1991 : R2005 | Standard Specification for Coated Fabrics-Waterproofness |
ASTM C 1619 : 2011 : R2017 | Standard Specification for Elastomeric Seals for Joining Concrete Structures |
14/30260383 DC : 0 | BS ISO 16905 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR RUBBER FLOOR COVERING - TILE/PLANK |
NACE TM 01 87 : 2011 | EVALUATING ELASTOMERIC MATERIALS IN SOUR GAS ENVIRONMENTS |
ASTM D 832 : 2007 | Standard Practice for Rubber Conditioning For Low Temperature Testing |
ASTM F 913 : 2002 : EDT 1 | Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
SAE J 2979 : 2012 | TEST METHOD FOR VULCANIZED RUBBER AND THERMOPLASTIC ELASTOMER DETERMINATION OF COMPRESSIVE STRESS RELAXATION (CSR) RESPONSE |
ASTM D 3853 : 2012 | Standard Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in Compounding |
ASTM D 3393 : 1991 : R2009 | Standard Specification for Coated Fabrics-Waterproofness |
DWA-M 612:2018 | TEST METHODS OF SAMPLING AND TESTING PULPS TO BE USED IN THE MANUFACTURE OF ELECTRICAL INSULATION |
ASTM C 864 : 2005 : R2011 | Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers |
MIL-DTL-17191 Revision E:2014 | MOUNTS, RESILIENT, PORTSMOUTH BONDED SPOOL TYPE |
NACE TM 02 97 : 2017 | EFFECTS OF HIGH-TEMPERATURE, HIGH-PRESSURE CARBON DIOXIDE DECOMPRESSION ON ELASTOMERIC MATERIALS |
GOST R 52714:2018 | Motor gasolines. Determination of individual and group hydrocarbon composition by capillary gas сhromatography method |
ASTM D 2632 : 2015 : REDLINE | Standard Test Method for Rubber Property—Resilience by Vertical Rebound |
ISO 10575:2012 | Resilient floor coverings — Specification for rubber sheet floor coverings with backing |
ISO 10577:2012 | Resilient floor coverings — Specification for rubber sheet floor coverings without backing |
ASTM C 425 : 2004 | Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings |
ASTM F 2523 : 2013 : REDLINE | Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers |
ASTM F 3041 : 2014 : R2019 | Standard Specification for Bonded Rubber Crumb Floor Coverings |
ASTM D 3393 : 1991 : R2001 : EDT 1 | Standard Specification for Coated Fabrics-Waterproofness |
ASTM D 3389 : 2016 : REDLINE | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
ASTM F 913 : 2002 : R2014 | Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining<brk/> Plastic Pipe |
ASTM F 2042 : 2000 : R2011 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication |
ASTM C 1478M : 2008 : REV A | Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric) |
ASTM D 3393 : 1991 : R1997 | Standard Specification for Coated Fabrics-Waterproofness |
ASTM D 6085 : 1997 : R2006 | Standard Practice for Sampling in Rubber Testing-Terminology and Basic Concepts |
ISEA 105 : 2016 | HAND PROTECTION CLASSIFICATION |
ASTM F 2042 : 2000 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication |
ASTM C 1644 : 2006 : R2011 | Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes |
09/30176641 DC : 0 | BS ISO 10577 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR RUBBER SHEET FLOOR COVERINGS WITHOUT BACKING |
BS ISO 10575:2012 | Resilient floor coverings. Specification for rubber sheet floor coverings with backing |
ASTM F 2468 : 2005 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
ASTM D 4393 : 2004 | Standard Test Method for Strap Peel Adhesion of Reinforcing Cords or Fabrics to Rubber Compounds |
ASTM D 5603 : 2001 : R2008 | Standard Classification for Rubber Compounding Materials<span class='unicode'>—</span>Recycled Vulcanizate Particulate Rubber |
ASTM D 3832 : 1979 : R2001 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
ASTM D 3832 : 1979 : R1997 : EDT 1 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
09/30176638 DC : 0 | BS ISO 10575 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR RUBBER SHEET FLOOR COVERING WITH BACKING |
MIL-DTL-19379 Revision C:2013 | Mounts, Resilient, Mare Island Types 11M15, 11M25, and 10M50 |
ISO 16905:2015 | Resilient floor coverings Specification for rubber floor covering Tile/Plank |
ASTM D 6085 : 1997 | Standard Practice for Sampling in Rubber Testing--Terminology and Basic Concepts |
ASTM F 2038 : 2000 : R2005 | Standard Guide for Silicone Elastomers, Gels and Foams Used in Medical Applications Part I - Formulations and Uncured Materials |
ANSI/AWWA C200 : 2017 | STEEL WATER PIPE, 6 IN. (150 MM) AND LARGER |
ASTM D 6370 : 1999 : R2009 | Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA) |
ASTM D 6085 : 1997 : R2016 | Standard Practice for Sampling in Rubber Testing—Terminology and Basic Concepts |
SAE J 1085 : 2017 | TESTING DYNAMIC PROPERTIES OF ELASTOMERIC ISOLATORS |
ASTM C 425 : 2004 : R2009 | Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings |
ASTM D 3771 : 2015 : REDLINE | Standard Specification for Rubber Seals Used in Concentrating Solar Collectors |
ASTM D 5593 : 1999 : EDT 1 | Standard Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005) |
ASTM F 2038 : 2000 : R2011 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I—Formulations and Uncured Materials |
ASTM C 923M : 200 | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric) |
ASTM D 8015 : 2015 | Standard Test Method for Dimensional Changes of Elastomer and Rubber Materials Due to Exposure to Gaseous Hydrocarbon Environments |
ASTM C 1401 : 2014 : REDLINE | Standard Guide for Structural Sealant Glazing |
ASTM C 923M : 2008 : REV B | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric) |
ASTM C 923M : 2008 | SPECIFICATION FOR RESILIENT CONNECTORS BETWEEN REINFORCED CONCRETE MANHOLE STRUCTURES, PIPES, AND LATERALS [METRIC] |
ASTM D 5869/D5869M : 2007 : REV A : R2018 : EDT 1 | Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
ASTM D 3832 : 1979 : R2017 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
ASTM D 5869 : 2007 : REV A : R2013 | Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
ASTM D 5644 : 2001 | Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
BS ISO 10577:2012 | Resilient floor coverings. Specification for rubber sheet floor coverings without back |
ASTM F 913 : 2002 | Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
ASTM D 6048 : 2007 : R2012 | Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers |
NACE TM 02 96 : 2014 | EVALUATING ELASTOMERIC MATERIALS IN SOUR LIQUID ENVIRONMENTS |
ASTM D 5992 : 1996 : R2006 | Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods |
ASTM D 6048 : 2007 | Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers |
ASTM F 604 : 1994 | Specification for Silicone Elastomers Used in Medical Applications (Withdrawn 2001) |
ASTM D 4777 : 1988 | Test Method For Adhesion Of Tire Cords And Other Reinforcing Cords To Rubber Compounds By Hot U-Test Procedure (Withdrawn 1994) |
API 6J : 1992 | BULLETIN ON TESTING OF OILFIELD ELASTOMERS - A TUTORIAL |
A-A-132 Revision B:1992 | ERASERS |
ASTM D 1871 : 2004 | Standard Test Method for Adhesion Between Tire Bead Wire and Rubber |
BS ISO 16905 : 2015 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR RUBBER FLOOR COVERING - TILE/PLANK |
ASTM D 1871 : 2004 : R2010 | Standard Test Method for Adhesion Between Tire Bead Wire and Rubber |
ASTM E 8/E8M : 2016-09 | TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
SAE J 1183 : 2017 | RECOMMENDED GUIDELINES FOR FATIGUE TESTING OF ELASTOMERIC MATERIALS AND COMPONENTS |
ASTM D 6370 : 1999 | Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA) |
ASTM D 6370 : 1999 : R2014 | Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA) |
ASTM D 6244 : 2006 : R2018 | Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains |
ASTM C 923 : 2008 | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals |
ASTM D 6085 : 1997 : R2002 | Standard Practice for Sampling in Rubber Testing—Terminology and Basic Concepts |
ASTM D 5644 : 2001 : R2008 : EDT 1 | Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
ASTM F 2946 :2012 | Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes |
ASTM C 1644 : 2006 | Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes |
ASTM D 3667 : 2016 : REDLINE | Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors |
ASTM A 1107/A1107M : 2017 | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Steel Drainage Pipes |
ASTM D 6085 : 1997 : R2011 | Standard Practice for Sampling in Rubber Testing<char: emdash>Terminology and Basic Concepts |
ASTM D 4776/D4776M : 2018 : REDLINE | Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure |
ASTM D 5644 : 2001 : R2008 | Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
ASTM C 923M : 2008 : REV A | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric) |
ASTM C 1478M : 2008 : REV A : R2013 | Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric) |
ASTM D 6244 : 2006 : R2011 | Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains |
ASTM C 864 : 2005 : R2015 | Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers |
ASTM E 20 : 1985 | Practice for Particle Size Analysis of Particulate Substances in the Range of 0.2 to 75 UM by Optical Microscopy (Withdrawn 1994) |
ASTM D 1076 : 2015 : REDLINE | Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex |
ISO 1382:2012 | Rubber Vocabulary |
ASTM D 6085 : 1997 | Standard Practice for Sampling in Rubber Testing--Terminology and Basic Concepts |
ASTM E 111 : 2017 : REDLINE | Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus |
ASTM D 925 : 2014 : REDLINE | Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.