ASTM D 1566 : 2019
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Terminology Relating to Rubber
Available format(s)
Hardcopy , PDF
Superseded date
11-24-2020
Language(s)
English
Published date
07-12-2019
This terminology covers definitions of technical terms used in the rubber industry.
1.1This terminology covers definitions of technical terms used in the rubber industry. Terms that are generally understood or adequately defined in other readily available sources are not included.
1.2Definitions for terms that have been established by other bodies recognized as expert in the field will, after ballot approval, be inserted in this terminology without change, and the source of the definition will be identified. Exceptions to this rule will be where the meaning of the term as used in the rubber industry is different from the common meaning of the term.
1.3Users of this terminology who require mathematical expressions for the time and temperature dependent physical properties of some terms found in this standard should refer to Guide D5992 and other standards listed under referenced documents. Selected terms from Guide D5992 may be found in Annex A1.
1.4Although this terminology standard avoids the inclusion of jargon and archaic terms as much as possible, some terms have been retained for historical reasons.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
D 11
|
| DocumentType |
Reference Material
|
| Pages |
17
|
| ProductNote |
THIS STANDARD ALSO REFERS TO ISO 1382-82
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 8015 : 2015 | Standard Test Method for Dimensional Changes of Elastomer and Rubber Materials Due to Exposure to Gaseous Hydrocarbon Environments |
| ASTM D 8059 : 2016 | Standard Test Method for Rubber Compounds—Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers |
| ASTM D 6244 : 2006 : R2018 | Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains |
| ASTM D 3903 : 2015 | Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems |
| ASTM E 631 : 2015 | Standard Terminology of Building Constructions |
| ASTM D 5289 : 2019 | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
| ASTM F 2038 : 2018 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I—Formulations and Uncured Materials |
| ASTM F 477 : 2014 | Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
| ASTM C 1115 : 2017 | Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories |
| ASTM D 3771 : 2015 | Standard Specification for Rubber Seals Used in Concentrating Solar Collectors |
| ASTM C 1523 : 2017 | Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants |
| ASTM C 717 : 2019 | Standard Terminology of Building Seals and Sealants |
| ASTM E 2203 : 2014 : R2018 | Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories |
| ASTM D 3667 : 2016 | Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors |
| ASTM D 832 : 2007 : R2018 | Standard Practice for Rubber Conditioning For Low Temperature Testing |
| ASTM D 3832 : 1979 : R2017 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
| ASTM F 2510/F2510M : 2017 | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene Pipes |
| ASTM F 1861 : 2016 | Standard Specification for Resilient Wall Base |
| ASTM D 4776/D4776M : 2018 | Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure |
| ASTM D 5869/D5869M : 2007 : REV A : R2018 : EDT 1 | Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
| ASTM F 3041 : 2014 : R2019 | Standard Specification for Bonded Rubber Crumb Floor Coverings |
| ASTM D 3393 : 1991 : R2014 | Standard Specification for Coated Fabrics—Waterproofness |
| ASTM A 1107/A1107M : 2017 | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Steel Drainage Pipes |
| ASTM C 1478M : 2019 | Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric) (Withdrawn 2020) |
| ASTM F 1860 : 2014 : EDT 1 | Standard Specification for Rubber Sheet Floor Covering With Backing |
| ASTM D 7216 : 2019 | Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers |
| ASTM F 1344 : 2015 | Standard Specification for Rubber Floor Tile |
| ASTM F 2468 : 2005 : R2019 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
| ASTM D 6085 : 1997 : R2016 | Standard Practice for Sampling in Rubber Testing—Terminology and Basic Concepts |
| ASTM D 2229 : 2010 : R2014 | Standard Test Method for Adhesion Between Steel Tire Cords and Rubber (Withdrawn 2023) |
| ASTM D 412 : 2016 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM D 6270 : 2017 | Standard Practice for Use of Scrap Tires in Civil Engineering Applications |
| ASTM F 2169 : 2015 : EDT 1 | Standard Specification for Resilient Stair Treads |
| ASTM D 1871 : 2004 : R2014 | Standard Test Method for Adhesion Between Tire Bead Wire and Rubber (Withdrawn 2023) |
| ASTM D 5603 : 2019 : REV A | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Rubber |
| ASTM F 2523 : 2013 | Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers |
| ASTM D 7999 : 2015 | Standard Classification for Rubber Products in Natural Gas Pipeline Applications |
| ASTM C 1518 : 2016 | Standard Specification for Precured Elastomeric Silicone Joint Sealants |
| ASTM E 1749 : 2018 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
| ASTM F 2042 : 2018 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication |
| ASTM D 6338 : 2017 | Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods |
| ASTM D 3853 : 2012 : R2017 | Standard Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in Compounding |
| ASTM F 2946 : 2012 : R2017 | Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes |
| ASTM F 1494 : 2014 | Standard Terminology Relating to Protective Clothing |
| ASTM F 913 : 2002 : R2014 | Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining<brk/> Plastic Pipe |
| ASTM C 1619 : 2019 | Standard Specification for Elastomeric Seals for Joining Concrete Structures |
| ASTM C 1478 : 2019 | Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals |
| ASTM C 1644 : 2006 : R2017 | Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes |
| ASTM D 883 : 2019 : REV B | Standard Terminology Relating to Plastics |
| ASTM D 5538 : 2013 : R2018 | Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations |
| ASTM D 8268 : 2019 | Standard Practice for Rubber Compounding Materials—Evaluation of Recycled Vulcanizate Particulate Rubber |
| ASTM D 2632 : 2015 | Standard Test Method for Rubber Property—Resilience by Vertical Rebound |
| ASTM D 3389 : 2016 | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
| ASTM D 6370 : 1999 : R2019 | Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA) |
| ASTM C 864 : 2005 : R2019 | Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers |
| ASTM F 1859 : 2014 : EDT 1 | Standard Specification for Rubber Sheet Floor Covering Without Backing |
| ASTM C 1401 : 2014 | Standard Guide for Structural Sealant Glazing |
| ASTM D 6048 : 2007 : R2018 | Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers |
| ASTM D 1646 : 2000 | Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 3053 : 2018 | Standard Terminology Relating to Carbon Black |
| ASTM D 1076 : 2015 : R2020 | Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex |
| ASTM D 1148 : 2013 | Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces |
| ASTM D 1646 : 2004 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 6085 : 1997 : R2006 | Standard Practice for Sampling in Rubber Testing-Terminology and Basic Concepts |
| ASTM D 1765 : 2005 : REV A : EDT 1 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1148 : 2007 | Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces |
| ASTM D 3053 : 2015 | Standard Terminology Relating to Carbon Black |
| ASTM D 1646 : 1981 | Standard Test Method for Rubber - Viscosity And Vulcanization Characteristics ( Mooney Viscometer) |
| ASTM D 1765 : 2003 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1415 : 2005 | Standard Test Method for Rubber Property—International Hardness |
| ASTM D 1765 : 2004 : EDT 1 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 6085 : 1997 : R2011 | Standard Practice for Sampling in Rubber Testing<char: emdash>Terminology and Basic Concepts |
| ASTM D 1765 : 2017 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 5603 : 2001 : R2008 | Standard Classification for Rubber Compounding Materials<span class='unicode'>—</span>Recycled Vulcanizate Particulate Rubber |
| ASTM D 3053 : 2008 | Standard Terminology Relating to Carbon Black |
| ASTM D 1415 : 1988 : R1999 | Standard Test Method for Rubber Property-International Hardness |
| ASTM D 1076 : 2006 | Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex |
| ASTM D 3053 : 2008 : REV B | Standard Terminology Relating to Carbon Black |
| ASTM D 1765 : 2014 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1415 : 2018 | Standard Test Method for Rubber Property—International Hardness |
| ASTM D 3053 : 1999 : EDT 1 | Standard Terminology Relating to Carbon Black |
| ASTM D 1646 : 2019 : REV A | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 1765 : 2000 : REV A | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1415 : 1988 : R2004 | Standard Test Method for Rubber Property—International Hardness |
| ASTM D 1646 : 2019 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 3053 : 2010 | Standard Terminology Relating to Carbon Black |
| ASTM D 1076 : 2015 | Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex |
| ASTM D 1765 : 2018 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1765 : 2001 : EDT 1 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1765 : 2019 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1076 : 2014 | Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex |
| ASTM D 1765 : 2004 : REV A | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1646 : 2003 : REV A | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 1646 : 2015 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 6085 : 1997 : R2002 | Standard Practice for Sampling in Rubber Testing—Terminology and Basic Concepts |
| ASTM D 3053 : 2004 | Standard Terminology Relating to Carbon Black |
| ASTM D 5992 : 1996 : R2018 | Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods |
| ASTM D 1646 : 2003 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 1765 : 2001 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 3053 : 2005 | Standard Terminology Relating to Carbon Black |
| ASTM D 3053 : 2017 | Standard Terminology Relating to Carbon Black |
| ASTM D 3053 : 1999 | Standard Terminology Relating to Carbon Black |
| ASTM D 1765 : 2016 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1148 : 2007 : REV A | Standard Test Method for Rubber Deterioration-Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces |
| ASTM D 5992 : 1996 : R2011 | Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods |
| ASTM D 1765 : 2005 : REV A | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1765 : 2013 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 6085 : 1997 | Standard Practice for Sampling in Rubber Testing--Terminology and Basic Concepts |
| ASTM D 3053 : 2006 | Standard Terminology Relating to Carbon Black |
| ASTM D 5603 : 2019 : REV A | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Rubber |
| ASTM D 1765 : 2006 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1076 : 1997 | Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex |
| ASTM D 1415 : 1968 | Standard Test Method for International Hardness Of Vulcanized Rubber |
| ASTM D 1646 : 2006 | Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 3053 : 2008 : REV A | Standard Terminology Relating to Carbon Black |
| ASTM D 1415 : 1988 : R1994 | Standard Test Method for Rubber Property-International Hardness |
| ASTM D 1646 : 2007 : R2012 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 3053 : 2013 : REV A | Standard Terminology Relating to Carbon Black |
| ASTM D 3053 : 2017 : REV A | Standard Terminology Relating to Carbon Black |
| ASTM D 3053 : 2006 : REV A | Standard Terminology Relating to Carbon Black |
| ASTM D 5992 : 1996 : R2006 : EDT 1 | Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods |
| ASTM D 5603 : 1996 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
| ASTM D 1148 : 2013 : R2018 | Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces |
| ASTM D 1765 : 2010 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 5992 : 1996 : R2001 : EDT 1 | Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods |
| ASTM D 5603 : 2001 : R2015 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
| ASTM D 1415 : 2006 : R2012 | Standard Test Method for Rubber Property—International Hardness |
| ASTM D 3053 : 2004 : REV B | Standard Terminology Relating to Carbon Black |
| ASTM D 5603 : 2019 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
| ASTM D 1646 : 2007 | Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 1415 : 2006 | Standard Test Method for Rubber Property—International Hardness |
| ASTM D 5603 : 2001 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
| ASTM D 1646 : 2017 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 1148 : 1995 | Standard Test Method for Rubber Deterioration—Heat and Ultraviolet Light Discoloration of Light-Colored Surfaces |
| ASTM D 1765 : 2004 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 3053 : 2013 | Standard Terminology Relating to Carbon Black |
| ASTM D 3053 : 2017 : REV A : EDT 1 | Standard Terminology Relating to Carbon Black |
| ASTM D 1646 : 1992 | Standard Test Method for RubberÐViscosity and Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 6085 : 1997 : R2016 | Standard Practice for Sampling in Rubber Testing—Terminology and Basic Concepts |
| ASTM D 5992 : 1996 : R2006 | Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods |
| ASTM D 1765 : 2005 | Standard Classification System for Carbon Blacks Used in Rubber Products |
| ASTM D 1076 : 2010 | Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex |
| ASTM D 3053 : 2004 : REV A | Standard Terminology Relating to Carbon Black |
| ASTM D 1076 : 2002 | Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex |
US$83.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.