ASTM D 1654 : 2008 : R2016 : EDT 1

Current

Current The latest, up-to-date edition.

Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

Publisher: American Society for Testing and Materials

Published:

Available Formats: PDF - English, Hardcopy - English
More Info on product formats

Abstract - (Show below) - (Hide below)

CONTAINED IN VOL. 06.01, 2017 Outlines the treatment of previously coated or painted specimens for accelerated and atmospheric exposure tests and their subsequent evaluation regarding blistering associated with corrosion, corrosion, loss of adhesion at a scribe mark or other film failure.

Scope - (Show below) - (Hide below)

1.1 This test method covers the treatment of previously painted or coated specimens for accelerated and atmospheric exposure tests and their subsequent evaluation in respect to corrosion, blistering associated with corrosion, loss of adhesion at a scribe mark, or other film failure.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Test Method
Status	Current
Publisher	American Society for Testing and Materials
ProductNote	Reconfirmed EDT 1
Pages
ISBN
Committee	D 01
Supersedes	ASTM D 1654 : 2005 ASTM D 1654 : 2008 : R2016

Standards Referenced By This Book - (Show below) - (Hide below)

ASTM D 6675 : 2001 : R2015	Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
ASTM G 85 : 2011	Standard Practice for Modified Salt Spray (Fog) Testing
ASTM F 2589 : 2016	Standard Specification for Ornamental Fences Employing Steel Tubular Pickets
ASTM A 755/A755M : 2018	Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
ASTM D 870 : 2015	Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
ASTM F 2957 : 2013 : R2019 : EDT 1	Standard Specification for Ornamental Aluminum Fence Systems
ASTM D 2248 : 2001 : REV A : R2018	Standard Practice for Detergent Resistance of Organic Finishes
ASTM B 117 : 2018	Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM C 647 : 2019	Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
ASTM D 3451 : 2006 : R2017	Standard Guide for Testing Coating Powders and Powder Coatings
ASTM D 7376 : 2010 : REV A : R2016	Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
ASTM D 5894 : 2016	Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D 6577 : 2015	Standard Guide for Testing Industrial Protective Coatings
ASTM D 2247 : 2015	Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
ASTM G 162 : 2018	Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils
ASTM D 1735 : 2014	Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM A 1004/A1004M : 1999 : R2018	Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
ASTM G 87 : 2002(R2018)	Standard Practice for Conducting Moist SO2 Tests
ASTM D 2803 : 2009 : R2015	Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
ASTM F 2408 : 2016	Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
ASTM D 3794 : 2018	Standard Guide for Testing Coil Coatings
ASTM A 1003/A1003M : 2015	Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members

Standards Referencing This Book - (Show below) - (Hide below)

ASTM D 6695 : 2016 : REDLINE	Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 870 : 2015	Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
ASTM D 6695 : 2003 : REV A	Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 1014 : 2009	Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates (Withdrawn 2018)
ASTM D 2247 : 2010	Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
ASTM D 2803 : 2003	Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
ASME B94.50 : 1975	BASIC NOMENCLATURE AND DEFINITIONS FOR SINGLE-POINT CUTTING TOOLS
ASTM D 5894 : 2005	Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D 4587 : 1991	Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D 1014 : 2009-03	PRACTICE FOR CONDUCTING EXTERIOR EXPOSURE TESTS OF PAINTS AND COATINGS ON METAL SUBSTRATES
ASTM D 1735 : 1999	Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 6695 : 2003 : REV B	Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 2247 : 2011	Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
ASTM G 85 : 2011 : REDLINE	Standard Practice for Modified Salt Spray (Fog) Testing
ASTM D 2247 : 2002	Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
ASTM D 4141 : 2007-07	PRACTICE FOR CONDUCTING BLACK BOX AND SOLAR CONCENTRATING EXPOSURES OF COATINGS
ASTM D 6695 : 2001	Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 4585 : 2007-07	PRACTICE FOR TESTING WATER RESISTANCE OF COATINGS USING CONTROLLED CONDENSATION
ASTM D 2247 : 1992	Standard Practice for Testing Water Reistence of Coatings in 100% Relative Humidity
ASTM D 4141 : 2007	Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
ASTM D 6695 : 2008	Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 2247 : 2015	Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
ASTM D 822 : 2006-11	PRACTICE FOR FILTERED OPEN-FLAME CARBON-ARC EXPOSURES OF PAINT AND RELATED COATINGS
ASTM D 2803 : 2009	GUIDE FOR TESTING FILIFORM CORROSION RESISTANCE OF ORGANIC COATINGS ON METAL
ASTM D 4585 : 1999	Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
ASTM D 1735 : 2014	Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 4587 : 2001	Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D 610 : 2008	Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
ASTM D 2803 : 2009	Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
ASTM D 2247 : 2015 : REDLINE	Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
ASTM D 5894 : 2010	Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D 4141 : 2001	Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
ASTM D 6695 : 2016	Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 7087 : 2005	TEST METHOD FOR AN IMAGING TECHNIQUE TO MEASURE RUST CREEPAGE AT SCRIBE ON COATED TEST PANELS SUBJECTED TO CORROSIVE ENVIRONMENTS
ASTM D 5894 : 2016	Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D 714 : 2009-07	TEST METHOD FOR EVALUATING DEGREE OF BLISTERING OF PAINTS
ASTM D 1735 : 2014 : REDLINE	Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM E 3 : 2011	GUIDE FOR PREPARATION OF METALLOGRAPHIC SPECIMENS
ASTM D 1735 : 2004	Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 4587 : 2011 : REDLINE	Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D 5894 : 2016 : REDLINE	Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D 4585 : 2007	Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
ASTM D 1735 : 2008	Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 1014 : 1995	Standard Practice for Conducting Exterior Exposure Tests of Paints on Steel
ASTM D 7087 : 2005 : REV A : R2010	Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments (Withdrawn 2019)
ASTM D 4587 : 2011	Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM G 87 : 2002	Standard Practice for Conducting Moist SO₂ Tests
ASTM D 6695 : 2003	Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 7087 : 2005	Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments
ASTM D 1014 : 2002	Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
ASTM D 1735 : 2002	Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 4141 : 1995	Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
ASTM D 2803 : 2009 : R2015	Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
ASTM D 4587 : 2005	Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D 2247 : 1999	Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
ASTM D 5894 : 1996	Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D 7087 : 2005 : REV A	Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments
ASTM B 117 : 2016-04	PRACTICE FOR OPERATING SALT SPRAY (FOG) APPARATUS
ASTM D 2803 : 1993	Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal (Withdrawn 2002)

Add To Cart

Product Format

Quantity

add to cart

ASTM D 1654 : 2008 : R2016 : EDT 1

Abstract - (Show below) - (Hide below)

Scope - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?