• There are no items in your cart

ASTM D 1835 : 2018 : REV A

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Liquefied Petroleum (LP) Gases
Available format(s)

Hardcopy , PDF

Superseded date

08-25-2020

Language(s)

English

Published date

01-21-2019

This specification covers those products commonly referred to as liquefied petroleum gases, consisting of propane, propene (propylene), butane, and mixtures of these materials.

1.1This specification covers those products commonly referred to as liquefied petroleum gases, consisting of propane, propene (propylene), butane, and mixtures of these materials. Four basic types of liquefied petroleum gases are provided to cover the common use applications.

1.2This specification is applicable to products intended for use as domestic, commercial and industrial heating, and engine fuels.

1.3The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.

1.3.1 The non-SI unit ‘psig’ is the standard unit for footnote B of Table 1 because that unit of measurement is widely used in North American industry.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 02
DocumentType
Standard
Pages
6
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 7423 : 2017 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
ASTM D 3700 : 2016 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 7756 : 2019 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
ASTM D 2158 : 2016 : REV A : EDT 1 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 2163 : 2014 : R2019 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
ASTM D 7828 : 2012 Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC) (Withdrawn 2021)
ASTM D 2598 : 2016 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
ASTM F 1930 : 2018 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM E 3082 : 2020 Standard Test Methods for Determining the Effectiveness of Fire Retardant Treatments for Natural Christmas Trees
ASTM D 1265 : 2011 : R2017 : EDT 1 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method

ASTM D 1838 : 2016 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 2158 : 2005 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 1837 : 2017 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases (Withdrawn 2017)
ASTM D 1657 : 1989 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Thermohydrometer (Withdrawn 1998)
ASTM D 1265 : 1997 Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)
ASTM D 2420 : 1991 : R1996 : EDT 1 Standard Test Method for Hydrogen Sulfide In Liquefied Petroleum (LP) Gases (Lead Acetate Method)
ASTM D 2713 : 2011 Standard Test Method for Dryness of Propane (Valve Freeze Method)
ASTM D 6897 : 2016 Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
ASTM D 7756 : 2011 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
ASTM D 2158 : 2016 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 6667 : 2001 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 3700 : 2001 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 2713 : 2007 Standard Test Method for Dryness of Propane (Valve Freeze Method)
ASTM D 1657 : 2002 : R2007 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D 5623 : 2019 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D 1267 : 2002 : R2007 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
ASTM D 2713 : 1991 : R2001 Standard Test Method for Dryness of Propane (Valve Freeze Method)
ASTM D 2158 : 2004 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 1837 : 2001 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases
ASTM D 2163 : 2014 : EDT 1 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
ASTM D 2163 : 2007 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
ASTM D 3700 : 2014 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 7756 : 2018 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
ASTM D 2420 : 2013 : R2018 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
ASTM D 7994 : 2017 Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM D 6667 : 2004 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 2158 : 2011 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 1837 : 2002 : REV A Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases
ASTM D 2158 : 1989 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 5623 : 1994 : R2014 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D 3700 : 1994 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 6897 : 2009 Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
ASTM D 2598 : 2012 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
ASTM D 7756 : 2012 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
ASTM D 2420 : 2012 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
ASTM D 1838 : 2012 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 6667 : 2004 : R2010 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 1838 : 2012 : REV A Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 1267 : 2002 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
ASTM D 7756 : 2019 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
ASTM D 6897 : 2003 : REV A Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
ASTM D 1267 : 2012 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
ASTM D 2598 : 2002 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
ASTM D 1838 : 2006 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 7828 : 2012 Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC) (Withdrawn 2021)
ASTM D 1838 : 2007 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 5623 : 1994 : R2009 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D 2713 : 2012 Standard Test Method for Dryness of Propane (Valve Freeze Method)
ASTM D 6667 : 2010 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 5504 : 2008 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 6897 : 2003 Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
ASTM D 1838 : 2003 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 2713 : 1991 : R1995 : EDT 1 Standard Test Method for Dryness of Propane (Valve Freeze Method)
ASTM D 1838 : 1991 : R1996 : EDT 2 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 1267 : 2018 Standard Test Method for Gauge Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
ASTM D 6667 : 2014 : R2019 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 2420 : 2012 : REV A Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
ASTM D 1657 : 2012 : R2017 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D 1837 : 1994 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases
ASTM D 1838 : 2005 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 6667 : 2014 : R2019 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 2158 : 2002 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 2598 : 1996 : R2001 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
ASTM D 5623 : 1994 : R2004 : EDT 1 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D 1265 : 2004 Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)
ASTM D 3700 : 2012 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 2420 : 2007 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
ASTM D 7756 : 2013 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
ASTM D 2158 : 2016 : REV A Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 2163 : 1991 : R1996 Standard Test Method for Analysis of Liquefied Petroleum (LP) Gases and Propene Concentrates by Gas Chromatography (Withdrawn 2005)
ASTM D 3700 : 2007 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 1267 : 1995 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
ASTM D 6667 : 2014 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 5504 : 1998 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 2713 : 2015 Standard Test Method for Dryness of Propane (Valve Freeze Method)
ASTM D 1265 : 2011 : R2017 : EDT 1 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
ASTM D 2158 : 1997 : EDT 1 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 5504 : 2001 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 2598 : 2016 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
ASTM D 1265 : 2005 Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)
ASTM D 5504 : 2001 : R2006 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 1837 : 2011 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases
ASTM D 2598 : 2002 : R2007 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
ASTM D 1838 : 1991 : R2001 : EDT 1 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 5504 : 2012 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 1838 : 1964 : R1968 Standard Method Of Test For Copper Strip Corrosion By Liquefied Petroleum (Lp) Gases
ASTM D 1265 : 2004 : REV A Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)
ASTM D 1265 : 2011 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
ASTM D 1838 : 2011 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 2713 : 2013 Standard Test Method for Dryness of Propane (Valve Freeze Method)
ASTM D 2158 : 2016 : REV A : EDT 1 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
ASTM D 2163 : 2014 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
ASTM D 2163 : 2014 : R2019 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
ASTM D 1838 : 2014 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 3700 : 2016 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 1837 : 2002 : REV A : R2007 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases
ASTM D 1657 : 2012 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D 1657 : 2012 : EDT 1 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D 5623 : 1994 : R1999 : EDT 1 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D 1657 : 2002 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
ASTM D 1837 : 2002 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases
ASTM D 2420 : 2013 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
ASTM D 2420 : 1991 : R2001 Standard Test Method for Hydrogen Sulfide In Liquefied Petroleum (LP) Gases (Lead Acetate Method)

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.