Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

02-23-2021

Publisher

American Society for Testing and Materials

1.1This test method covers the determination of load-deflection characteristics of plastic pipe under parallel-plate loading.

1.2This test method covers thermoplastic resin pipe, reinforced thermosetting resin pipe (RTRP), and reinforced polymer mortar pipe (RPMP).

1.3The characteristics determined by this test method are pipe stiffness, stiffness factor, and load at specific deflections.

1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Note 1:While this test method can be used in measuring the pipe stiffness of corrugated plastic pipe or tubing, other profile wall designs, and products produced from polyethylene, PVC or polypropylene, special conditions and procedures are used. These details are included in the product standards, for example, Specifications F667/F667M, F949, F2764/F2764M, and others.

1.5The text of this test method references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the test method.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	F 17
DocumentType	Test Method
Pages	7
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 2412 : 2011 : R2018

ASTM F 758 : 2014 : R2019	Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
ASTM D 2665 : 2020	Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM F 949 : 2020	Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
ASTM D 2321 : 2020	Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D 2852 : 2016	Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings (Withdrawn 2022)
ASTM F 2435 : 2015	Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
ASTM F 2763 : 2016	Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F 810 : 2012 : R2018	Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
ASTM F 1504 : 2014	Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
ASTM F 1732 : 2012 : R2018	Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
ASTM F 3128 : 2019	Standard Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent Pipe with a Cellular Core
ASTM F 1412 : 2016	Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
ASTM F 480 : 2014	Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
ASTM F 2686 : 2014	Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe (Withdrawn 2023)
ASTM F 2658 : 2007 : R2019	Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
ASTM D 3034 : 2016	Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
ASTM D 2997 : 2015	Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM F 3219 : 2019	Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings
ASTM F 2418 : 2019	Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
ASTM F 512 : 2019	Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
ASTM F 1673 : 2010 : R2016	Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
ASTM F 2947/F2947M : 2020	Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F 794 : 2003 : R2014	Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
ASTM F 2764/F2764M : 2019	Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
ASTM D 3485 : 2015	Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)
ASTM D 2949 : 2018	Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM F 449 : 2020	Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
ASTM F 1499 : 2017	Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
ASTM D 3517 : 2019	Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM F 2817 : 2013 : R2019	Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
ASTM D 2680 : 2020	Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM D 2729 : 2017	Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
ASTM D 2661 : 2014 : EDT 1	Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM F 2986 : 2012 : R2017	Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications
ASTM F 2433 : 2005 : R2018	Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
ASTM D 5677 : 2017	Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
ASTM D 2996 : 2017	Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM F 2306/F2306M : 2020	Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
ASTM F 891 : 2016	Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
ASTM F 2160 : 2016	Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
ASTM F 714 : 2021	Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
ASTM F 2618 : 2019	Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
ASTM F 1760 : 2016 : R2020	Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
ASTM F 2562/F2562M : 2015 : R2019	Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
ASTM F 679 : 2016	Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
ASTM F 2390 : 2012 : R2017	Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
ASTM F 1803 : 2015 : R2019	Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
ASTM D 3754 : 2019	Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
ASTM F 2881/F2881M : 2019	Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM F 894 : 2019	Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
ASTM F 1533 : 2020	Standard Specification for Deformed Polyethylene (PE) Liner
ASTM D 2517 : 2018	Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
ASTM F 1901 : 2016	Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
ASTM F 1488 : 2014 : R2019	Standard Specification for Coextruded Composite Pipe
ASTM F 2987 : 2012 : R2018	Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications (Withdrawn 2024)
ASTM F 2648/F2648M : 2020	Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
ASTM F 3371 : 2019	Standard Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent Applications
ASTM F 1871 : 2020	Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
ASTM F 2922 : 2013 : R2018	Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
ASTM D 3262 : 2020	Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM D 3753 : 2020	Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells
ASTM F 667/F667M : 2016	Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings

ASTM F 412 : 2020 : REV A	Standard Terminology Relating to Plastic Piping Systems
ASTM F 412 : 2021	Standard Terminology Relating to Plastic Piping Systems
ASTM F 667/F667M : 2016 : R2021	Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
ASTM E 691 : 2020	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2019 : EDT 1	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2023	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2022	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM F 667/F667M : 2016	Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
ASTM D 2122 : 2022	Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
ASTM D 1600 : 2018	Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024)
ASTM E 691 : 2021	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM F 412 : 2023	Standard Terminology Relating to Plastic Piping Systems
ASTM F 2764/F2764M : 2023	Standard Specification for 6 in. to 60 in. [150 mm to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
ASTM D 695 : 2015	Standard Test Method for Compressive Properties of Rigid Plastics
ASTM D 2122 : 2016	Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
ASTM D 695 : 2023	Standard Test Method for Compressive Properties of Rigid Plastics