Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

Published date

10-01-2016

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 04.03, 2016 Defines the material requirements for preformed polychloroprene elastomeric joint seals for concrete pavements.

1.1This specification covers the material requirements for preformed polychloroprene elastomeric joint seals for concrete pavements. The seal consists of a multiple web design and functions only by compression of the seal between the faces of the joint with the seal folding inward at the top to facilitate compression. The seal is installed with a lubricant and is designed to seal the joint and reject incompressibles.

1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Note 1:This specification is a manufacturing and purchasing specification only and does not include requirements or considerations for selection of size, or the installation of the joint seals. However, experience has shown that successful performance of this product depends upon the proper selection of size and cross-sectional design of the joint seal, joint size, and joint spacing for the ambient conditions the pavement will be exposed to, and care in the installation of the joint seals.

Committee	D 04
DevelopmentNote	Supersedes AASHTO M 220. (07/2014)
DocumentType	Standard
ProductNote	Reconfirmed 2016
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 2628 : 1991 : R2011

ASTM C 1127/C1127M : 2015	Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
ASTM D 5973 : 1997 : R2017	Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

ASTM D 2240 : 2000	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 471 : 2016 : REV A	Standard Test Method for Rubber Property—Effect of Liquids
ASTM D 1149 : 2016	Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 3183 : 2010	Standard Practice for Rubber<span class='unicode'>—</span>Preparation of Pieces for Test Purposes from Products
ASTM D 1149 : 2016-02	TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT
ASTM D 2240 : 2004	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 3183 : 2009	Standard Practice for Rubber<span class='unicode'>—</span>Preparation of Pieces for Test Purposes from Products
ASTM D 3183 : 201	PRACTICE FOR RUBBER - PREPARATION OF PIECES FOR TEST PURPOSES FROM PRODUCTS
ASTM D 1149 : 2015	Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 412 : 2016 : EDT 1	Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 3183 : 2010 : R2015	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 1149 : 2007	Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment
ASTM D 2240 : 2004 : EDT 1	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 471 : 2016 : REV A : R2021	Standard Test Method for Rubber Property—Effect of Liquids
ASTM D 3183 : 2007	Standard Practice for Rubber—Preparation of Product Pieces for Test Purposes from Products
ASTM D 412 : 2016	Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 1149 : 2018	Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 2240 : 2015 : R2021	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 575 : 1991 : R1996	Standard Test Methods for Rubber Properties in Compression
ASTM D 2240 : 2002	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 3183 : 1984 : R1998	Standard Practice for Rubber-Preparation of Pieces for Test Purposes from Products
ASTM D 2240 : 2015	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1149 : 2007 : R2012	Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 2240 : 2003	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1149 : 1978 : REV A	Standard Test Method for Rubber Deterioration - Surface Ozone Cracking In A Chamber ( Flat Specimen)
ASTM D 2240 : 2002 : REV B	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2240 : 2015 : EDT 1	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 412 : 2016 : R2021	Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 2240 : 2005	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2240 : 2005 : R2010	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 471 : 2016-02	TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS
ASTM D 3183 : 2002	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 2240 : 2002 : REV A	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 3183 : 2010 : R2019	Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
ASTM D 1149 : 1999	Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber