• There are no items in your cart

ASTM D 2734 : 2016

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Methods for Void Content of Reinforced Plastics
Available format(s)

Hardcopy , PDF

Superseded date

11-20-2023

Language(s)

English

Published date

09-07-2016

1.1These test methods cover the void content of reinforced plastics or “composites.” The test methods are applicable to composites for which the effects of ignition on the materials are known. Most plastics, glass, and reinforcements fall into this class. These test methods are not applicable to composites for which the effects of ignition on the plastics, the reinforcement, and any fillers are unknown. This class may include silicone resins, which do not burn off completely, reinforcements consisting of metals, organic materials, or inorganic materials which may gain or lose weight, and fillers consisting of oxides, carbonates, etc., which may gain or lose weight. Note that separate weight loss tests of individual materials will usually, but not necessarily, give the same result as when all the materials are combined.

Note 1:There is no known ISO equivalent to these test methods.

1.2The values stated in SI units are to be regarded as standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 20
DocumentType
Test Method
Pages
4
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 6415/D6415M : 2022 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D 7291/D7291M : 2022 Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM D 7264/D7264M : 2021 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D 8131/D8131M : 2023 Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates
ASTM F 641 : 2009 : R2023 Standard Specification for Implantable Epoxy Electronic Encapsulants
ASTM D 5961/D5961M : 2023 Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
ASTM D 3410/D3410M : 2016 : EDT 1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D 5448/D5448M : 2022 Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 7078/D7078M : 2020 : EDT 1 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D 5766/D5766M : 2023 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
ASTM D 5229/D5229M : 2020 Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
ASTM D 6416/D6416M : 2016 : EDT 1 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
ASTM D 2344/D2344M : 2022 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D 8510/D8510M : 2023 Standard Test Method for Local Buckling and Crippling under Axial Compressive Loading
ASTM D 5528/D5528M : 2021 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D 4762 : 2023 Standard Guide for Testing Polymer Matrix Composite Materials
ASTM D 4255/D4255M : 2020 : EDT 1 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D 7745 : 2019 Standard Practice for Testing Pultruded Composites
ASTM D 5450/D5450M : 2022 Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 7136/D7136M : 2020 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM D 7905/D7905M : 2019 : EDT 1 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D 6484/D6484M : 2023 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM D 5449/D5449M : 2022 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 8387/D8387M : 2023 Standard Test Method for High Bypass – Low Bearing Interaction Response of Polymer Matrix Composite Laminates
ASTM D 6671/D6671M : 2022 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM E 1556 : 2020 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
ASTM D 5379/D5379M : 2019 : EDT 1 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
ASTM D 7332/D7332M : 2023 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a <brk/>Fiber-Reinforced Polymer Matrix Composite
ASTM D 7248/D7248M : 2023 Standard Test Method for High Bearing - Low Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM C 273/C273M : 2020 Standard Test Method for Shear Properties of Sandwich Core Materials
ASTM D 5687/D5687M : 2020 Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
ASTM D 5379/D5379M : 2012 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
ASTM C 297/C297M : 2016 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
ASTM E 1556 : 2012 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
ASTM C 364/C364M : 2016 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
ASTM D 6416/D6416M : 2016 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
ASTM D 7248/D7248M : 2012 : R2017 Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM D 5687/D5687M : 1995 : R2015 Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
ASTM D 3410/D3410M : 2016 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D 6484/D6484M : 2014 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM D 7905/D7905M : 2019 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D 2344/D2344M : 2016 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D 5961/D5961M : 2017 Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
ASTM D 5449/D5449M : 2016 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 5528 : 2013 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM C 273/C273M : 2018 Standard Test Method for Shear Properties of Sandwich Core Materials
ASTM D 4762 : 2018 Standard Guide for Testing Polymer Matrix Composite Materials
ASTM D 3039/D3039M : 2017 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM D 4255/D4255M : 2015 : REV A Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D 7078/D7078M : 2012 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D 5450/D5450M : 2016 Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 5467/D5467M : 1997 : R2017 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
ASTM D 6671/D6671M : 2019 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM F 641 : 2009 : R2014 Standard Specification for Implantable Epoxy Electronic Encapsulants
ASTM F 602 : 2009 : R2015 Standard Criteria for Implantable Thermoset Epoxy Plastics
ASTM D 5448/D5448M : 2016 Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 6115 : 1997 : R2019 Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D 5229/D5229M : 2014 : EDT 1 Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
ASTM D 5766/D5766M : 2011 : R2018 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates

ASTM D 2584 : 2002 Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D 2584 : 2008 Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D 2584 : 1994 Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D 1505 : 2003 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D 2584 : 2011 Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D 1505 : 1968 : R1979 Standard Test Method for Density Of Plastics By The Density-Gradient Technique
ASTM D 2584 : 1968 Standard Method Of Test For Ignition Loss Of Cured Reinforced Resins
ASTM D 618 : 2013 Standard Practice for Conditioning Plastics for Testing
ASTM D 1505 : 2010 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D 1505 : 2018 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D 2584 : 2018 Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D 1505 : 1998 : EDT 1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D 618 : 2021 Standard Practice for Conditioning Plastics for Testing

View more information
US$66.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.