Name: ASTM D 3212 : 2020
Brand: ASTM
Price: 66.00 USD

ASTM D 3212 : 2020

Superseded

View Superseded by

Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

Available format(s)

Hardcopy , PDF

Superseded date

03-24-2022

Language(s)

English

Published date

12-07-2020

Publisher

American Society for Testing and Materials

1.1 This specification covers joints for plastic pipe systems intended for drain, and gravity sewerage pipe at internal or external pressures less than 25-ft head using flexible watertight elastomeric seals. This specification is intended to cover the test requirements, test methods, and acceptable materials. The test methods described for the joints are not intended to be routine quality control tests but to be reliability or performance requirements.

1.2The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.

1.3The following safety hazards caveat pertains only to the test method portion, paragraph 7.5, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	F 17
DocumentType	Standard
Pages	3
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM D 3212 : 2021
Supersedes	ASTM D 3212 : 2007 : R2020

ASTM F 1759 : 1997 : R2018	Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
ASTM F 894 : 2019	Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
ASTM F 3219 : 2019	Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings
ASTM F 3371 : 2019	Standard Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent Applications
ASTM F 1488 : 2014 : R2019	Standard Specification for Coextruded Composite Pipe
ASTM F 2649 : 2014 : R2019	Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
ASTM F 2764/F2764M : 2019	Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
ASTM F 1803 : 2015 : R2019	Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
ASTM F 758 : 2014 : R2019	Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
ASTM F 2562/F2562M : 2015 : R2019	Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
ASTM F 949 : 2020	Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
ASTM F 2987 : 2012 : R2018	Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications (Withdrawn 2024)
ASTM D 2241 : 2020	Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
ASTM D 2680 : 2020	Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM F 1760 : 2016 : R2020	Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
ASTM F 1336 : 2020	Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
ASTM F 794 : 2021	Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
ASTM F 2763/F2763M : 2016 : R2021 : EDT 1	Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F 2737 : 2011 : R2021	Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
ASTM D 1785 : 2021 : REV A	Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
ASTM F 2881/F2881M : 2021 : EDT 1	Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM F 2947/F2947M : 2021 : REV A	Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F 412 : 2021	Standard Terminology Relating to Plastic Piping Systems
ASTM F 679 : 2021	Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
ASTM D 3034 : 2021	Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
ASTM F 2306/F2306M : 2021	Standard Specification for 300 mm to 1500 mm [12 in. to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Non-Pressure Gravity-Flow Storm Sewer and Subsurface Drainage Applications
ASTM F 2487 : 2021	Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
ASTM F 1866 : 2018	Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
ASTM F 2435 : 2015	Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
ASTM F 891 : 2016	Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core

ASTM F 477 : 2014	Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM D 1598 : 2015 : REV A	Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM F 913 : 2002 : R2021	Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining<brk/> Plastic Pipe
ASTM F 477 : 2002	Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM F 477 : 2014 : R2021	Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM D 1598 : 1997	Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM F 913 : 1995	Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM F 913 : 2002 : R2014	Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining<brk/> Plastic Pipe
ASTM D 1598 : 2021	Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM F 913 : 2001	Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe