• There are no items in your cart

ASTM D 3835 : 2016

Current
Current

The latest, up-to-date edition.

Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

05-20-2016

1.1This test method covers measurement of the rheological properties of polymeric materials at various temperatures and shear rates common to processing equipment. It covers measurement of melt viscosity, sensitivity, or stability of melt viscosity with respect to temperature and polymer dwell time in the rheometer, die swell ratio (polymer memory), and shear sensitivity when extruding under constant rate or stress. The techniques described permit the characterization of materials that exhibit both stable and unstable melt viscosity properties.

1.2This test method has been found useful for quality control tests on both reinforced and unreinforced thermoplastics, cure cycles of thermosetting materials, and other polymeric materials having a wide range of melt viscosities.

1.3The values stated in SI units are to be regarded as standard. The inch-pound units given in parentheses are for information only.

Note 1:Although this test method and ISO 11443–1995, “Plastic—Determination of the Fluidity of Plastics Using Capillary and Slit-Die Rheometers” differ in approach or detail, the data obtained using ISO 11443, Method A is technically equivalent to this test method

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 20
DocumentType
Test Method
Pages
11
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM F 451 : 2016 Standard Specification for Acrylic Bone Cement
ASTM F 942 : 2018 Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
ASTM D 5422 : 2017 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
ASTM D 5336 : 2015 : REV A Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material
ASTM D 5575 : 2018 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
ASTM D 3364 : 1999 : R2019 Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
ASTM D 4067 : 2016 Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
ASTM D 5138 : 2016 Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
ASTM D 5099 : 2008 : R2017 Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry
ASTM D 8033 : 2016 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials
ASTM F 561 : 2019 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids

ASTM D 883 : 2023 Standard Terminology Relating to Plastics
ASTM D 1238 : 2000 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D 1238 : 2004 : REV C Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D 1238 : 2023 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D 1238 : 2023 : REV A Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D 1238 : 2013 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D 883 : 2024 Standard Terminology Relating to Plastics
ASTM D 1238 : 2010 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D 883 : 2022 Standard Terminology Relating to Plastics
ASTM D 883 : 2020 : REV B Standard Terminology Relating to Plastics
ASTM E 691 : 2020 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2019 : EDT 1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2023 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2022 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2009 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 1238 : 2004 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D 618 : 2013 Standard Practice for Conditioning Plastics for Testing
ASTM E 691 : 2021 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 1238 : 2001 : EDT 1 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D 1238 : 2020 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D 1238 : 2004 : REV A Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D 1238 : 1985 Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D 618 : 2021 Standard Practice for Conditioning Plastics for Testing

View more information
US$69.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.