|
ASTM D 788 : 2016
|
Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds |
|
ASTM D 6394 : 2014
|
Standard Specification for Sulfone Plastics (SP) |
|
ASTM D 3753 : 2012 : EDT 1
|
Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells |
|
ASTM D 3754 : 2014
|
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe |
|
ASTM D 5047 : 2017
|
Standard Specification for Polyethylene Terephthalate Film and Sheeting |
|
ASTM D 6263 : 2015
|
Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) |
|
ASTM D 1636 : 2013
|
Standard Specification for Allyl Molding Compounds |
|
ASTM D 3965 : 2016
|
Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings |
|
ASTM D 3350 : 2014
|
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
|
ASTM D 1763 : 2000 : R2013
|
Standard Specification for Epoxy Resins |
|
ASTM D 5336 : 2015 : REV A
|
Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material |
|
ASTM D 3299 : 2018
|
Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
|
ASTM D 5927 : 2017
|
Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods |
|
ASTM D 1784 : 2011
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds |
|
ASTM D 3368 : 2017
|
Standard Specification for FEP Sheet and Film |
|
ASTM D 4477 : 2016
|
Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit |
|
ASTM D 6835 : 2017
|
Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE) |
|
ASTM D 3295 : 2015
|
Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing |
|
ASTM D 4894 : 2019
|
Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials |
|
ASTM D 7445 : 2018
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding) |
|
ASTM D 4097 : 2018
|
Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
|
ASTM D 2647 : 2018
|
Standard Specification for Crosslinkable Ethylene Plastics |
|
ASTM D 4549 : 2015
|
Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS) |
|
ASTM D 7793 : 2017
|
Standard Specification for Insulated Vinyl Siding |
|
ASTM D 4634 : 2016
|
Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA) |
|
ASTM D 3308 : 2012 : R2017
|
Standard Specification for PTFE Resin Skived Tape |
|
ASTM D 6098 : 2016
|
Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC) |
|
ASTM D 6779 : 2017
|
Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) |
|
ASTM D 704 : 1999 : R2012
|
Standard Specification for Melamine-Formaldehyde Molding Compounds |
|
ASTM D 1201 : 2013
|
Standard Specification for Thermosetting Polyester Molding Compounds |
|
ASTM D 3159 : 2015
|
Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials |
|
ASTM D 3517 : 2014
|
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
|
ASTM D 705 : 1999 : R2012
|
Standard Specification for Urea-Formaldehyde Molding Compounds |
|
ASTM D 4067 : 2016
|
Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods |
|
ASTM D 3679 : 2017
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding |
|
ASTM D 4216 : 2017
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds |
|
ASTM D 1248 : 2016
|
Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
|
ASTM D 3307 : 2016
|
Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials |
|
ASTM D 4441 : 2015
|
Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene |
|
ASTM D 707 : 2015
|
Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) |
|
ASTM D 5575 : 2018
|
Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
|
ASTM D 2116 : 2016
|
Standard Specification for FEP Resin Molding and Extrusion Materials |
|
ASTM D 6261 : 2014
|
Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES) |
|
ASTM D 4976 : 2012 : REV A
|
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials |
|
ASTM D 4745 : 2019
|
Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods |
|
ASTM D 8065/D8065M : 2016
|
Standard Classification System and Basis for Specification for Specifying Plastic Films |
|
ASTM D 6778 : 2014
|
Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM) |
|
ASTM D 4203 : 2017
|
Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials |
|
ASTM D 4802 : 2016
|
Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet |
|
ASTM D 4895 : 2018
|
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion |
|
ASTM D 1562 : 2015
|
Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP) |
|
ASTM D 4396 : 2015
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications |
|
ASTM D 1755 : 2015
|
Standard Specification for Poly(Vinyl Chloride) Resins |
|
ASTM D 4000 : 2016
|
Standard Classification System for Specifying Plastic Materials |
|
ASTM D 4673 : 2016
|
Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials |
|
ASTM D 3262 : 2016
|
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe |
|
ASTM D 6339 : 2011 : R2019
|
Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS) |
|
ASTM D 6865 : 2017
|
Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials |
|
ASTM D 4726 : 2018
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors |
|
ASTM D 5989 : 2018
|
Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA) |
|
ASTM D 1710 : 2015
|
Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes |
|
ASTM D 6100 : 2017
|
Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM) |
|
ASTM D 3678 : 2014
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions |
|
ASTM D 8195 : 2018
|
Standard Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting |
|
ASTM D 5740 : 2018
|
Standard Guide for Writing Material Standards in the Classification D4000 Format |
|
ASTM D 6585 : 2017
|
Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
|
ASTM D 7472 : 2019
|
Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials |
|
ASTM D 1593 : 2013
|
Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting |
|
ASTM D 6713 : 2014
|
Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF) |
|
ASTM D 6783 : 2005 : REV A : R2017
|
Standard Specification for Polymer Concrete Pipe |
|
ASTM F 997 : 2018
|
Standard Specification for Polycarbonate Resin for Medical Applications |
|
ASTM D 5857 : 2017
|
Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology |
|
ASTM D 2673 : 2014
|
Standard Specification for Oriented Polypropylene Film |
|
ASTM D 7471 : 2019
|
Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials |
|
ASTM D 3294 : 2015
|
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes |
|
ASTM D 706 : 2015
|
Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA) |
|
ASTM D 3275 : 2018
|
Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials |
|
ASTM D 7292 : 2018
|
Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI) |
|
ASTM D 3840 : 2014
|
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications |
|
ASTM D 5926 : 2015
|
Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems |
|
ASTM D 5436 : 2015
|
Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes |
|
ASTM D 7436 : 2017
|
Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology |
|
ASTM D 2287 : 2012
|
Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds |
|
ASTM D 4397 : 2016
|
Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications |
|
ASTM D 3841 : 2016
|
Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels |
|
ASTM D 6712 : 2017
|
Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes |
|
ASTM D 1430 : 2017
|
Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics |
|
ASTM D 6338 : 2017
|
Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods |
|
ASTM D 5138 : 2016
|
Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP) |
|
ASTM D 6262 : 2017
|
Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK) |
|
ASTM D 4066 : 2013
|
Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
|
ASTM D 4801 : 2008 : R2016
|
Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater |
|
ASTM D 3013 : 2013
|
Standard Specification for Epoxy Molding Compounds |
|
ASTM D 8033 : 2016
|
Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials |
|
ASTM D 7193 : 2017
|
Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
|
ASTM D 1998 : 2015
|
Standard Specification for Polyethylene Upright Storage Tanks |
|
ASTM D 4551 : 2017
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane |
|
ASTM D 2517 : 2018
|
Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings |
|
ASTM D 3935 : 2015
|
Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material |
|
ASTM D 7293 : 2012
|
Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI) |
|
ASTM D 7254 : 2017
|
Standard Specification for Polypropylene (PP) Siding |
|
ASTM D 5205 : 2016
|
Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials |
|
ASTM D 2103 : 2015
|
Standard Specification for Polyethylene Film and Sheeting |
|
ASTM D 4101 : 2017 : EDT 1
|
Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials |
|
ASTM D 5675 : 2013 : R2018
|
Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders |
|
ASTM D 3222 : 2018 : REV A
|
Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
|
ASTM D 3595 : 2014 : R2019 : EDT 1
|
Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film |
|
ASTM D 6456 : 2010 : R2018
|
Standard Specification for Finished Parts Made from Polyimide Resin |
|
ASTM D 787 : 2018
|
Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds |
|
ASTM D 6358 : 2019 : EDT 1
|
Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding Materials Using ISO Methods |
|
ASTM F 2207 : 2006 : R2019
|
Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe |