• There are no items in your cart

ASTM D 3930 : 2008 : R2015

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
Available format(s)

Hardcopy , PDF

Superseded date

05-26-2023

Language(s)

English

Published date

04-15-2015

CONTAINED IN VOL. 15.06, 2015 Gives the means to measure and evaluate the performance of adhesives for structural or semistructural bonding of wood-to-wood in manufactured homes.

1.1This specification provides the means to measure and evaluate the performance of adhesives for structural or semi-structural bonding of wood-to-wood in manufactured homes. Wood as used in this specification includes lumber, plywood, particleboard, gypsum board, and all materials having wood-based surfaces at the bondline. This specification does not cover other adhesives used in manufactured homes such as adhesives for carpet, floor tile, ceramic fixtures, plastic laminates, trim and millwork, and similar nonstructural applications.

1.1.1The performance of the adhesives is measured in the following tests:

Number

Test

Section

 1

Low Temperature

16

 2

Dry Lumber

17

 3

Gap-Filling

18

 4

High Temperature

19

 5

Type 3 Qualification

20

 6

Type 2 Qualification

21

 7

Aging, Film Oxidation

22

 8

Aging, Bond Oxidation

23

 9

Resistance to Deformation, Creep

24

10

Mold

25

11

Type 1 Qualification

26

1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 14
DocumentType
Standard
Pages
19
ProductNote
Reconfirmed 2015
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 1165 : 1980 : R1994 : EDT 1 Standard Nonmenclature of Domestic Hardwoods and Softwoods (Withdrawn 2002)
ASTM D 1165 : 2007 Standard Nomenclature of Commercial Hardwoods and Softwoods
ASTM D 9 : 2020 Standard Terminology Relating to Wood and Wood-Based Products
ASTM D 3632 : 1998 : R2011 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
ASTM A 376/A376M : 1998 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
ASTM D 1002 : 1999 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D 2294 : 1996 : R2008 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D 3110 : 1995 Specification for Adhesives Used in Laminate Joints for Nonstructural Glued Lumber Products (Withdrawn 1996)
ASTM D 2294 : 1996 : R2016 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D 2339 : 1998 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
ASTM A 376/A376M : 2017 : REDLINE Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
ASTM A 376/A376M : 2019 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
ASTM D 9 : 2012 : REDLINE Standard Terminology Relating to Wood and Wood-Based Products
ASTM D 2339 : 1998 : R2017 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
ASTM D 3931 : 1993 : REV A : R1999 : EDT 1 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
ASTM D 4300 : 2001 : R2013 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 1002 : 2010 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D 907 : 2015 Standard Terminology of Adhesives
ASTM E 6 : 2002 Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 905 : 2008 : R2021 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D 3632 : 1998 : R2004 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
ASTM D 905 : 2008 : R2013 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D 4300 : 2023 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 4300 : 2001 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 1002 : 2005 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D 3931 : 2008 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
ASTM D 1165 : 2018 Standard Nomenclature of Commercial Hardwoods and Softwoods
ASTM D 2339 : 1998 : R2004 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
ASTM D 907 : 2015 : R2023 Standard Terminology of Adhesives
ASTM D 3632 : 1998 : R2019 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
ASTM D 1002 : 2010 : R2019 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D 4300 : 1998 : REV A Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM E 6 : 2015 : EDT 3 Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 6 : 2023 : REV A Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 907 : 2015 : REDLINE Standard Terminology of Adhesives
ASTM D 905 : 1998 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D 4300 : 2001 : R2021 : EDT 1 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 2294 : 1996 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D 905 : 2008 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D 1002 : 2001 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D 4300 : 2001 : R2008 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM E 6 : 2015 : EDT 4 : REDLINE Standard Terminology Relating to Methods of Mechanical Testing
ASTM A 376/A376M : 2022 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
ASTM D 2294 : 1996 : R2002 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D 1165 : 2003 Standard Nonmenclature of Domestic Hardwoods and Softwoods
ASTM D 3632 : 1998 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
ASTM D 1165 : 2013 Standard Nomenclature of Commercial Hardwoods and Softwoods
ASTM D 3931 : 2008 : R2015 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
ASTM E 6 : 2015 : EDT 4 Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 6 : 2023 Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 2339 : 1998 : R2011 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
ASTM D 3931 : 1993 : REV A : R2005 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.