Name: ASTM D 3986 : 2017
Brand: ASTM
Price: 63.00 USD

Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

06-01-2017

Publisher

American Society for Testing and Materials

1.1This test method covers the determination of dissolved and total recoverable barium in brines, seawater, and brackish waters by direct-current argon plasma atomic emission spectroscopy (DCP–AES).

1.2This test method has been tested in the range from 10 mg/L to 20 mg/L. Samples shall be diluted to contain concentrations within the calibration range (see 11.1 and 12.5). Higher concentrations can also be determined by changing to a less sensitive emission line.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 19
DocumentType	Test Method
Pages	5
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 3986 : 2011

ASTM D 4328 : 2018

Standard Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines

ASTM D 4841 : 1988 : R2008	Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
ASTM D 5810 : 1996 : R2021	Standard Guide for Spiking into Aqueous Samples
ASTM D 3370 : 1995 : REV A : R2003 : EDT 1	Standard Practices for Sampling Water from Closed Conduits
ASTM D 3352 : 2003 : EDT 1	Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
ASTM D 1129 : 2003	Standard Terminology Relating to Water
ASTM D 4841 : 1988 : R2018	Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
ASTM D 1129 : 2013	Standard Terminology Relating to Water
ASTM D 1129 : 2013 : R2020	Standard Terminology Relating to Water
ASTM D 5847 : 1999 : REV A : EDT 1	Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D 5810 : 1996 : R2011	Standard Guide for Spiking into Aqueous Samples
ASTM D 1129 : 2013 : R2020 : EDT 2	Standard Terminology Relating to Water
ASTM D 1193 : 1977 : R1983 : EDT 1	Standard Specification for Reagent Water
ASTM D 4841 : 1988 : R1998	Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
ASTM D 5847 : 2002 : R2007	Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D 5810 : 1996 : R2001	Standard Guide for Spiking into Aqueous Samples
ASTM D 1129 : 2006	Standard Terminology Relating to Water
ASTM E 1097 : 2003	Standard Guide for Direct Current Plasma Emission Spectrometry Analysis
ASTM D 4841 : 1988 : R2003	Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
ASTM D 3370 : 2010	Standard Practices for Sampling Water from Closed Conduits
ASTM D 4841 : 1988 : R2013	Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
ASTM D 5847 : 2002 : R2012	Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM E 1097 : 1997	Standard Guide for Direct Current Plasma Emission Spectrometry Analysis
ASTM D 1129 : 2013 : R2020 : EDT 1	Standard Terminology Relating to Water
ASTM D 3352 : 1994 : R1999	Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
ASTM D 3370 : 2008	Standard Practices for Sampling Water from Closed Conduits
ASTM D 1129 : 1999 : REV A	Standard Terminology Relating to Water
ASTM D 3352 : 2003	Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
ASTM D 1129 : 2006 : REV A	Standard Terminology Relating to Water
ASTM D 1193 : 2006 : R2011	Standard Specification for Reagent Water
ASTM E 1097 : 2012 : R2017	Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry
ASTM D 5847 : 2002 : R2020	Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D 1129 : 2003 : REV A	Standard Terminology Relating to Water
ASTM D 1129 : 2002	Standard Terminology Relating to Water
ASTM D 3352 : 2008	Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
ASTM D 5810 : 1996 : R2006	Standard Guide for Spiking into Aqueous Samples
ASTM D 1193 : 1991	Standard Specification for Reagent Water
ASTM D 3352 : 2008 : REV A	Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
ASTM D 1129 : 2004	Standard Terminology Relating to Water
ASTM E 1097 : 2012	Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry
ASTM D 5847 : 2022	Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM E 1097 : 2007	Standard Guide for Direct Current Plasma-Atomic Emission Spectrometry Analysis
ASTM D 3370 : 2018	Standard Practices for Sampling Water from Flowing Process Streams
ASTM D 1129 : 2002 : REV A	Standard Terminology Relating to Water
ASTM D 5847 : 2002	Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D 3370 : 1976	Standard Practices for Sampling Water
ASTM D 1193 : 1970	Standard Specification For Reagent Water
ASTM D 4841 : 1988 : R2013 : EDT 1	Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
ASTM D 1193 : 2006	Standard Specification for Reagent Water
ASTM D 3370 : 1995 : REV A : R1999 : EDT 1	Standard Practices for Sampling Water from Closed Conduits
ASTM D 1193 : 1999	Standard Specification for Reagent Water
ASTM D 1129 : 2010	Standard Terminology Relating to Water
ASTM D 5810 : 1996	Standard Guide for Spiking into Aqueous Samples
ASTM D 3370 : 2007	Standard Practices for Sampling Water from Closed Conduits
ASTM D 1129 : 2006 : REV A : EDT 1	Standard Terminology Relating to Water
ASTM D 1129 : 2001	Standard Terminology Relating to Water
ASTM D 1129 : 2004 : EDT 1	Standard Terminology Relating to Water
ASTM D 1193 : 2006 : R2018	Standard Specification for Reagent Water
ASTM D 5810 : 1996 : R2015	Standard Guide for Spiking into Aqueous Samples
ASTM D 3352 : 2015	Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines