• There are no items in your cart

ASTM D 4727/D4727M : 2017

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
Available format(s)

Hardcopy , PDF

Superseded date

06-17-2022

Language(s)

English

Published date

06-26-2017

1.1This specification covers fiberboard primarily used for the fabrication of boxes and interior details such as pads, sleeves, liners, partitions, die-cut sheets, etc.

1.2The performance of fiberboard boxes is largely dependent on the paper components from which they are fabricated and, in the case of corrugated boxes, on the flute structure as well. Therefore, a variety of grades reflecting varied performance levels are specified.

1.3The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. See IEEE/ASTM-SI-10 for conversion of units.

1.4The following safety hazards caveat pertains only to the test portion, Sections 8 and 9, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 10
DocumentType
Standard
Pages
9
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM B 660 : 2021 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
ASTM D 5118/D5118M : 2015 : R2020 Standard Practice for Fabrication of Fiberboard Shipping Boxes
ASTM D 6251/D6251M : 2019 Standard Specification for Wood-Cleated Panelboard Shipping Boxes
ASTM B 359/B359M : 2018 Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
ASTM D 6255/D6255M : 2018 Standard Specification for Steel or Aluminum Slotted Angle Crates
ASTM D 6256/D6256M : 2016 Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases
ASTM D 2658 : 2018 Standard Test Method for Determining Dimensions of Fiberboard Boxes
ASTM D 5639/D5639M : 2020 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
ASTM D 5330/D5330M : 2006 : R2020 Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
ASTM F 1312 : 2019 Standard Specification for Brick, Insulating, High Temperature, Fire Clay
ASTM D 5486/D5486M : 2006 : R2020 Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing

ASTM D 3953 : 2006 Standard Specification for Strapping, Flat Steel and Seal
ASTM E 662 : 2021 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D 3950 : 2010 : REV B Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM D 4169 : 2016 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 5168 : 2012 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
ASTM D 3951 : 2010 Standard Practice for Commercial Packaging
ASTM D 6199 : 1997 : EDT 1 Standard Practice for Quality of Wood Members of Containers and Pallets
ASTM D 4169 : 2005 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 3953 : 2007 Standard Specification for Strapping, Flat Steel and Seals
ASTM D 3950 : 2001 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM D 3950 : 2010 : REV A Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM D 6199 : 1997 : R2005 Standard Practice for Quality of Wood Members of Containers and Pallets
ASTM D 3951 : 1998 Standard Practice for Commercial Packaging
ASTM D 3953 : 1991 Standard Specification for Strapping, Flat Steel and Seals
ASTM E 162 : 2021 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM D 3950 : 2016 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM D 3950 : 2007 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM D 4169 : 1999 : EDT 1 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 4675 : 2009 Standard Guide for Selection and Use of Flat Strapping Materials
ASTM E 662 : 2021 : REV A Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D 5168 : 2012 : R2017 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
ASTM D 3953 : 2012 Standard Specification for Strapping, Flat Steel and Seals
ASTM D 3953 : 2015 Standard Specification for Strapping, Flat Steel and Seals
ASTM D 4675 : 2006 Standard Guide for Selection and Use of Flat Strapping Materials
ASTM D 3950 : 2004 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM D 3950 : 2009 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM D 5168 : 2003 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
ASTM D 4169 : 2001 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 3950 : 2005 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM E 662 : 2019 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM D 6199 : 2018 : REV A Standard Practice for Quality of Wood Members of Containers and Pallets
ASTM D 3953 : 2005 Standard Specification for Strapping, Flat Steel and Seals
ASTM D 3951 : 2015 Standard Practice for Commercial Packaging
ASTM D 4169 : 2004 : REV A Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 3951 : 2018 Standard Practice for Commercial Packaging
ASTM D 3950 : 2009 : REV A Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM D 4169 : 2001 : EDT 1 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 3950 : 2011 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM D 4675 : 2003 Standard Guide for Selection and Use of Flat Strapping Materials
ASTM D 3953 : 2007 : REV A Standard Specification for Strapping, Flat Steel and Seals
ASTM D 4169 : 2022 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 4169 : 2004 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 4169 : 2008 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 6199 : 2018 Standard Practice for Quality of Wood Members of Containers and Pallets
ASTM D 3950 : 2006 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM D 4675 : 2000 Standard Guide for Selection and Use of Flat Strapping Materials
ASTM D 3950 : 2017 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM D 4675 : 2006 : EDT 1 Standard Guide for Selection and Use of Flat Strapping Materials
ASTM D 4675 : 2006 : EDT 2 Standard Guide for Selection and Use of Flat Strapping Materials
ASTM D 4675 : 2009 : EDT 1 Standard Guide for Selection and Use of Flat Strapping Materials
ASTM D 4169 : 2014 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 3950 : 2012 : REV A Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM D 4675 : 2014 Standard Guide for Selection and Use of Flat Strapping Materials
ASTM D 3950 : 2010 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM D 3953 : 2002 Standard Specification for Strapping, Flat Steel and Seals
ASTM D 3950 : 2000 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM D 996 : 2010 Standard Terminology of Packaging and Distribution Environments
ASTM D 6199 : 2007 : R2012 Standard Practice for Quality of Wood Members of Containers and Pallets
ASTM D 4169 : 2009 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 3953 : 2013 Standard Specification for Strapping, Flat Steel and Seals
ASTM E 662 : 2021 : REV A : EDT 1 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E 162 : 2016 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM D 5168 : 1998 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
ASTM D 5168 : 2009 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
ASTM D 3953 : 1997 Standard Specification for Strapping, Flat Steel and Seals
ASTM D 4675 : 2014 : REV A Standard Guide for Selection and Use of Flat Strapping Materials<sup>1</sup>
ASTM D 6199 : 2007 Standard Practice for Quality of Wood Members of Containers and Pallets

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.