• There are no items in your cart

ASTM D 4950 : 2014

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Classification and Specification for Automotive Service Greases
Available format(s)

Hardcopy , PDF

Superseded date

11-20-2019

Language(s)

English

Published date

12-01-2014

1.1 This specification covers lubricating greases suitable for the periodic relubrication of chassis systems and wheel bearings of passenger cars, trucks, and other vehicles.

1.1This specification covers lubricating greases suitable for the periodic relubrication of chassis systems and wheel bearings of passenger cars, trucks, and other vehicles.

1.2This specification defines the requirements used to describe the properties and performance characteristics of chassis greases and wheel bearing greases for service-fill applications.

1.3The test requirements (acceptance limits) given in this specification are, as the case may be, minimum or maximum acceptable values for valid duplicate test results. Apply no additional corrections for test precision, such as described in Practice D3244, inasmuch as the precision of the test methods was taken into account in the determination of the requirements.

1.4The values stated in SI units are to be regarded as standard.

1.4.1Exceptions—Test Method D2596 reports test results in kgf units, and Test Method D4289 reports rubber hardness in Durometer Shore A units.

Committee
D 02
DocumentType
Standard
Pages
6
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 4289 : 2013 : R2014 : EDT 1 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D 6185 : 2011 : R2017 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases
ASTM C 1812/C1812M : 2015 : EDT 1 Standard Practice for Design of Journal Bearing Supports to be Used in Fiber Reinforced Concrete Beam Tests

ASTM D 2266 : 2001 Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
ASTM D 4175 : 2014 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2009 : REV A : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2008 : REV B : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4693 : 1997 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
ASTM D 4175 : 2005 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2005 : EDT 2 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4693 : 2007 : R2017 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
ASTM D 3527 : 2018 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM D 3244 : 1997 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
ASTM D 1742 : 2006 : R2013 Standard Test Method for Oil Separation from Lubricating Grease During Storage
ASTM D 4175 : 2015 : REV C Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 3244 : 2012 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
ASTM D 4175 : 2017 : REV A : EDT 1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 2266 : 2001 : R2015 Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
ASTM D 4170 : 2010 Standard Test Method for Fretting Wear Protection by Lubricating Greases
ASTM D 4175 : 2008 : REV A Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 3527 : 1995 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM D 4175 : 2017 : REV B Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 1742 : 1994 : R2000 : EDT 1 Standard Test Method for Oil Separation from Lubricating Grease During Storage
ASTM D 4175 : 2009 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 2596 : 1997 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
ASTM D 4290 : 2007 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
ASTM D 2596 : 2010 : EDT 1 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
ASTM D 3244 : 2007 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
ASTM D 1264 : 2016 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
ASTM D 1743 : 2005 : REV A Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
ASTM D 4289 : 2003 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D 3244 : 2016 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
ASTM D 4175 : 2009 : REV A : EDT 4 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2009 : REV A : EDT 3 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 3527 : 2002 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM D 4175 : 2018 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 3527 : 2007 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM D 4175 : 2001 : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4170 : 1997 Standard Test Method for Fretting Wear Protection by Lubricating Greases
ASTM D 4175 : 2001 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2005 : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 1264 : 2003 : EDT 1 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
ASTM D 1264 : 2011 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
ASTM D 4290 : 1994 : R1999 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
ASTM D 2266 : 2001 : R2008 Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
ASTM D 4175 : 2002 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4290 : 2015 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
ASTM D 4175 : 2015 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2002 : REV A : EDT 2 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4170 : 2016 Standard Test Method for Fretting Wear Protection by Lubricating Greases
ASTM D 1264 : 2000 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
ASTM D 1743 : 2005 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
ASTM D 4290 : 2007 : R2012 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
ASTM D 1264 : 2012 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
ASTM D 2265 : 2006 : R2014 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ASTM D 4175 : 2009 : REV A : EDT 5 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2016 : REV C Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2015 : REV B Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4289 : 1997 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D 4289 : 2013 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D 2265 : 2015 : EDT 1 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ASTM D 4175 : 2015 : REV A Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2009 : REV A Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2016 : REV B Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 3527 : 2007 : EDT 1 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM D 4175 : 2002 : REV A : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2008 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2002 : REV A Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 1742 : 2006 Standard Test Method for Oil Separation from Lubricating Grease During Storage
ASTM D 2596 : 2015 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
ASTM D 4175 : 2000 : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4175 : 2016 : REV A Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 1743 : 2010 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
ASTM D 4693 : 2007 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
ASTM D 1264 : 2003 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
ASTM D 1264 : 2003 : R2008 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
ASTM D 2265 : 2019 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ASTM D 1743 : 2013 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
ASTM D 1743 : 2001 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
ASTM D 2265 : 2006 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ASTM D 4175 : 2017 : REV A Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 2265 : 2000 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ASTM D 1743 : 2005 : REV A : EDT 1 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
ASTM D 4175 : 2009 : REV A : EDT 2 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 3527 : 2015 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM D 1264 : 1996 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
ASTM D 3527 : 2011 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM D 4290 : 2002 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
ASTM D 4175 : 2018 : EDT 1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4175 : 2016 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 2265 : 1994 : REV A Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ASTM D 1743 : 1994 : EDT 1 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
ASTM D 1743 : 2013 : R2018 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
ASTM D 4693 : 2003 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
ASTM D 4693 : 2007 : R2012 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
ASTM D 1264 : 2018 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
ASTM D 2596 : 2010 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
ASTM D 4175 : 2017 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 2266 : 1991 : R1996 Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
ASTM D 4175 : 2019 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 3244 : 2007 : REV A Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
ASTM D 4175 : 2015 : REV B : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4289 : 2013 : R2014 : EDT 1 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D 4290 : 2019 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
ASTM D 4175 : 2008 : REV B Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D 4289 : 2003 : R2008 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D 2265 : 2015 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ASTM D 2596 : 2014 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.