• There are no items in your cart

ASTM D 5950 : 2014 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
Available format(s)

PDF

Language(s)

English

Published date

05-01-2014

CONTAINED IN VOL. 05.03, 2015 Specifies the determination of pour point of petroleum products by an automatic instrument that tilts the test jar during cooling and detects movement of the surface of the test specimen with an optical device.

1.1This test method covers the determination of pour point of petroleum products by an automatic instrument that tilts the test jar during cooling and detects movement of the surface of the test specimen with an optical device.

1.2This test method is designed to cover the range of temperatures from −66 °C to +51 °C; however, the range of temperatures included in the 1992 interlaboratory test program only covered the temperature range from −39 °C to +6 °C, and the range of temperatures included in the 1998 interlaboratory test program was −51 °C to −11 °C. (See Section 13.)

1.3Test results from this test method can be determined at 1 °C or 3 °C intervals.

1.4This test method is not intended for use with crude oils.

Note 1The applicability of this test method on residual fuel samples has not been verified. For further information on applicability, refer to 13.4.

1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 02
DocumentType
Redline
Pages
7
PublisherName
American Society for Testing and Materials
Status
Current

MIL-PRF-17331 Revision K:2013 LUBRICATING OIL, STEAM TURBINE AND GEAR, MODERATE SERVICE
MIL PRF 009000 : K LUBRICATING OIL, SHIPBOARD INTERNAL COMBUSTION ENGINE, HIGH-OUTPUT DIESEL
MIL-PRF-9000 Revision L:2014 Lubricating Oil, Shipboard Internal Combustion Engine, High-Output Diesel
MIL PRF 002104 : L LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT/TACTICAL SERVICE
MIL-DTL-16884 Revision P:2017 FUEL, NAVAL DISTILLATE
DEFSTAN 91-035/4(2018) : 2018 HYDRAULIC FLUID, PETROLEUM: EMULSIFYING, ANTI-WEAR JOINT SERVICE DESIGNATION: OX-30
DEFSTAN 91-039/4(2018) : 2018 HYDRAULIC FLUID, PETROLEUM: ANTI-WEAR NATO CODE NO: H-576 JOINT SERVICE DESIGNATION: OM-33
ASHRAE GUIDELINE 40 : 2017 REFRIGERATION OIL DESCRIPTION
MIL-PRF-32490 Base Document:2014 ADDITIVE, LUBRICITY IMPROVER, DIESEL
MIL-PRF-32538 Base Document:2015 LUBRICATING OIL, HELICOPTER TRANSMISSION SYSTEM, SYNTHETIC BASE, NATO CODE NUMBER: O-165
MIL-DTL-32353 Revision A:2012 HYDRAULIC & LUBRICATING OIL, SYNTHETIC HYDROCARBON BASE
ASTM D 6074 : 2015 : REDLINE Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
MIL-PRF-2104 Revision K:2016 LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT/TACTICAL SERVICE
SAE J 313 : 2017 DIESEL FUELS
ASTM D 7666 : 2012 Standard Specification for Triglyceride Burner Fuel
SAE AS 5780 : 2018 SPECIFICATION FOR AERO AND AERO-DERIVED GAS TURBINE ENGINE LUBRICANTS
ASHRAE HDBK REFRIGERATION : 2014 ASHRAE HANDBOOK - REFRIGERATION
MIL PRF 16884 : K FUEL, NAVAL DISTILLATE
ASTM D 86 : 2017-06 TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE
MIL-PRF-25017 Revision H:2011 INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (NATO S-1747)
MIL-PRF-17672 Revision E:2010 Hydraulic Fluid, Petroleum, Inhibited
ASTM D 6158 : 2016-02 SPECIFICATION FOR MINERAL HYDRAULIC OILS
ASTM D 5222 : 2016 : REDLINE Standard Specification for High Fire-Point Mineral Electrical Insulating Oils
API 1525A : 1ED 2012 BULK ENGINE OIL CHAIN OF CUSTODY AND QUALITY DOCUMENTATION
SAE J 2359 : 1998 LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, MILITARY COMBAT/TACTICAL SERVICE
SAE J 357 : 2016 PHYSICAL AND CHEMICAL PROPERTIES OF ENGINE OILS
MIL-PRF-23699 Revision G:2014 Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167

IP 15 : 2015 PETROLEUM PRODUCTS - DETERMINATION OF POUR POINT

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.