• There are no items in your cart

ASTM D 5973 : 1997 : R2017

Current
Current

The latest, up-to-date edition.

Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

07-01-2017

CONTAINED IN VOL. 04.03, 2017 Defines the material requirements for preformed elastomeric strip seals and the corresponding steel locking edge rail used in expansion joint sealing.

1.1This specification covers the material requirements for preformed elastomeric strip seals and the corresponding steel locking edge rail used in expansion joint sealing. The scope of this specification is limited to preformed non-reinforced strip seals that mechanically lock into structural steel locking lugs. The sealing element can consist of a single layer strip or have multiple webs depending on individual project requirements. The structural steel locking edge rail shall be anchored into the structure in accordance with the purchaser's specific details. While the scope of this specification is limited to the materials used in fabrication of strip sealing systems, it is recommended that a practical means of testing the watertightness aspects of the individual systems either in the field or at a testing laboratory be developed. When used on highway bridges, limits on maximum joint opening and minimum steel thicknesses need to be addressed.

1.2The values stated in the inch-pound system shall be considered as standard.

1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 04
DocumentType
Standard
Pages
3
ProductNote
Reconfirmed 2017
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 2240 : 2000 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 471 : 2016 : REV A Standard Test Method for Rubber Property—Effect of Liquids
ASTM D 4070 : 2015 Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
ASTM D 2628 : 1991 : R2011 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
ASTM D 1149 : 2016 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 2628 : 1991 : R2016 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
ASTM D 1149 : 2016-02 TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT
ASTM D 4070 : 1991 : R1996 : EDT 1 Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures (Withdrawn 2005)
ASTM D 2240 : 2004 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1149 : 2015 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM A 572/A572M : 2021 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM D 412 : 2016 : EDT 1 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 4070 : 2008 Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
ASTM D 1149 : 2007 Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment
ASTM D 2628 : 1991 : R2005 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
ASTM D 2240 : 2004 : EDT 1 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 471 : 2016 : REV A : R2021 Standard Test Method for Rubber Property—Effect of Liquids
ASTM D 4070 : 2015 : R2022 Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
ASTM D 412 : 2016 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 4070 : 2015 : REDLINE Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
ASTM D 1149 : 2018 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 2240 : 2015 : R2021 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2628 : 1991 : R1998 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
ASTM D 2240 : 2002 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2240 : 2015 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1149 : 2007 : R2012 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 2240 : 2003 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1149 : 1978 : REV A Standard Test Method for Rubber Deterioration - Surface Ozone Cracking In A Chamber ( Flat Specimen)
ASTM D 2240 : 2002 : REV B Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2240 : 2015 : EDT 1 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 412 : 2016 : R2021 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM A 36/A36M : 2019 Standard Specification for Carbon Structural Steel
ASTM D 2240 : 2005 Standard Test Method for Rubber Property—Durometer Hardness
ASTM A 572/A572M : 2018 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM D 2240 : 2005 : R2010 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 471 : 2016-02 TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS
ASTM A 572/A572M : 2021 : EDT 1 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM D 2240 : 2002 : REV A Standard Test Method for Rubber Property—Durometer Hardness
ASTM A 588/A588M : 2015 : REDLINE Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
ASTM D 1149 : 1999 Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber

View more information
US$55.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.