ASTM D 6224 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
Available format(s)
Hardcopy , PDF
Superseded date
11-16-2023
Language(s)
English
Published date
11-21-2016
This practice covers the requirements for the effective monitoring of mineral oil and phosphate ester fluid lubricating oils in service auxiliary (non-turbine) equipment used for power generation.
1.1This practice covers the requirements for the effective monitoring of mineral oil and phosphate ester fluid lubricating oils in service auxiliary (non-turbine) equipment used for power generation. Auxiliary equipment covered includes gears, hydraulic systems, diesel engines, pumps, compressors, and electrohydraulic control (EHC) systems. It includes sampling and testing schedules and recommended action steps, as well as information on how oils degrade.
Note 1:Other types of synthetic lubricants are sometimes used but are not addressed in this practice because they represent only a small fraction of the fluids in use. Users of these fluids should consult the manufacturer to determine recommended monitoring practices.
1.2This practice does not cover the monitoring of lubricating oil for steam and gas turbines. Rather, it is intended to complement Practice D4378.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 02
|
| DocumentType |
Standard Practice
|
| Pages |
20
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 4378 : 2013 | Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines |
| ASTM D 7590 : 2009 : R2014 | Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry |
| ASTM D 7720 : 2011 : R2017 | Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination |
| ASTM D 8112 : 2017 | Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid |
| ASTM D 6971 : 2009 : R2014 | Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 8185 : 2018 | Standard Guide for In-Service Lubricant Viscosity Measurement |
| ASTM D 6810 : 2013 | Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 4378 : 2020 | Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines |
| ASTM D 7669 : 2020 | Standard Guide for Practical Lubricant Condition Data Trend Analysis |
| ASTM D 7720 : 2021 | Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination |
| ASTM D 4057 : 2019 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 2896 : 1998 | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| ASTM D 2896 : 2005 | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| ASTM D 4378 : 2003 | Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines |
| ASTM D 974 : 2014 : EDT 2 | Standard Test Method for Acid and Base Number by Color-Indicator Titration |
| ASTM D 4057 : 1995 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 974 : 2001 | Standard Test Method for Acid and Base Number by Color-Indicator Titration |
| ASTM D 2273 : 1997 : R2002 : EDT 1 | Standard Test Method for Trace Sediment in Lubricating Oils |
| ASTM D 3524 : 2004 | Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography (Withdrawn 2013) |
| ASTM D 1401 : 2019 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 7464 : 2020 | Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing |
| ASTM D 1298 : 2012 : REV A | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| ASTM D 7669 : 2011 | Standard Guide for Practical Lubricant Condition Data Trend Analysis |
| ASTM D 7720:2011 | Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination |
| ASTM E 1064 : 2012 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM D 7155 : 2006 | Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils |
| ASTM D 3427 : 2003 | Standard Test Method for Air Release Properties of Petroleum Oils |
| ASTM D 5185 : 1997 | Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 2668 : 2002 : EDT 1 | Standard Test Method for 2,6-<i>di-tert</i>-Butyl-<i> p</i>-Cresol and 2,6-<ital>di-tert</ital>-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption |
| ASTM D 4052 : 1996 : R2002 : EDT 1 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM D 2422 : 1997 : R2007 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| ASTM D 4739 : 2005 | Standard Test Method for Base Number Determination by Potentiometric Titration |
| ASTM D 1298 : 2012 : REV B | Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| ASTM D 3427 : 2015 | Standard Test Method for Air Release Properties of Hydrocarbon Based Oils |
| ASTM D 7687 : 2017 | Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration |
| ASTM D 1533 : 2012 | Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration |
| ASTM D 2982 : 2007 | Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils |
| ASTM D 4057 : 2012 : R2018 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4052 : 2018 : REV A | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 2422 : 1997 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| ASTM D 2273 : 1997 : R2002 : EDT 2 | Standard Test Method for Trace Sediment in Lubricating Oils |
| ASTM D 6304:2016 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration |
| ASTM D 1401 : 2018 : REV B | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM E 1064 : 2000 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM D 3427 : 2014 : REV A | Standard Test Method for Air Release Properties of Petroleum Oils |
| ASTM D 2668 : 2007 : R2013 | Standard Test Method for 2,6-<i>di-tert</i>-Butyl-<i> p</i>-Cresol and 2,6-<ital>di-tert</ital>-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption |
| ASTM D 4378 : 2012 | Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines |
| ASTM E 1064 : 2005 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM D 7720 : 2021 | Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination |
| ASTM D 2422 : 1997 : R2018 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| ASTM D 6971 : 2009 : R2014 | Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 6304 : 2004 : REV A : EDT 1 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration |
| ASTM D 2273 : 1997 | Standard Test Method for Trace Sediment in Lubricating Oils |
| ASTM D 1401 : 2018 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 5185 : 2005 | Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 1500 : 2004 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 257 : 2014 | Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
| ASTM D 1401 : 2009 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 1298 : 1999 : R2005 | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| ASTM D 7414 : 2021 | Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry |
| ASTM D 4052 : 2009 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 4057 : 1981 : EDT 2 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM E 1064 : 2004 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM D 5185 : 2002 | Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 2982 : 2007 : R2013 | Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils |
| ASTM D 1401 : 1998 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 1298 : 2012 : REV B : R2017 | Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| ASTM D 1298 : 2012 | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| ASTM D 2896 : 2007 : REV A | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| ASTM D 6810 : 2002 | Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in HL Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 2668 : 2007 | Standard Test Method for 2,6-<i>di-tert</i>-Butyl-<i> p</i>-Cresol and 2,6-<ital>di-tert</ital>-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption |
| ASTM D 6971 : 2009 | Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 6304 : 2007 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration (Withdrawn 2016) |
| ASTM D 974 : 2021 | Standard Test Method for Acid and Base Number by Color-Indicator Titration |
| ASTM D 6304 : 2004 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration |
| ASTM D 1298 : 1999 : EDT 2 | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| ASTM D 7978 : 2014 | Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method |
| ASTM D 5185 : 2018 | Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 2896 : 2011 | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| ASTM D 1500 : 2012 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 6810 : 2013 | Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 1169 : 2002 | Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids |
| ASTM D 7464 : 2019 | Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing |
| ASTM D 6304 : 2016 : EDT 1 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration |
| ASTM D 7978 : 2014 : R2019 | Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method |
| ASTM D 2982 : 2007 : R2019 | Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils |
| ASTM D 4739 : 2008 | Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration |
| ASTM D 3427 : 2002 | Standard Test Method for Air Release Properties of Petroleum Oils |
| ASTM D 2982 : 1998 : EDT 1 | Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils |
| ASTM D 5185 : 2013 : EDT 1 | Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 7687 : 2011 | Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and Fuel-Associated Water with Sample Concentration by Filtration |
| ASTM D 6304 : 2004 : REV A | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration |
| ASTM D 445 : 1988 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity) |
| ASTM D 1298 : 1999 | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| ASTM D 6304 : 2004 : EDT 1 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration |
| ASTM D 7155 : 2011 | Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils |
| ASTM D 4739 : 2017 | Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration |
| ASTM D 7464 : 2008 : R2013 | Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing |
| ASTM D 3524 : 2014 | Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography |
| ASTM D 4739 : 2006 | Standard Test Method for Base Number Determination by Potentiometric Titration |
| ASTM D 4057 : 2006 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 7414 : 2009 | Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry |
| ASTM D 1500 : 2003 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 7647 : 2010 : R2018 | Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction |
| ASTM D 4739 : 1996 | Standard Test Method for Base Number Determination by Potentiometric Titration |
| ASTM D 4052 : 2011 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 1500 : 1982 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 6304 : 2000 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration |
| ASTM D 1533 : 2000 : R2005 | Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration |
| ASTM D 7687 : 2021 | Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration |
| ASTM D 4052 : 2016 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 4057 : 2012 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 3427 : 2014 : REV A : EDT 1 | Standard Test Method for Air Release Properties of Petroleum Oils |
| ASTM D 2896 : 2001 : EDT 1 | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| ASTM D 7843 : 2018 | Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry |
| ASTM D 5185 : 2013 | Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 664 : 1995 | Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration |
| ASTM D 1500 : 2002 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 7669 : 2015 | Standard Guide for Practical Lubricant Condition Data Trend Analysis |
| ASTM D 943 : 2018 | Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils |
| ASTM D 7647 : 2010 | Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction |
| ASTM D 7546 : 2009 | Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor |
| ASTM D 1169 : 2009 | Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids |
| ASTM D 2272 : 1998 | Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
| ASTM D 1500 : 1998 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 1500 : 2012 : R2017 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 2896 : 2001 | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| ASTM D 1298 : 1999 : EDT 1 | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| ASTM D 4739 : 2011 : R2017 | Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration |
| ASTM D 1169 : 2011 | Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids |
| ASTM D 445 : 2019 : REV A | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D 2896 : 2003 | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| ASTM E 1064 : 2008 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM D 1401 : 2002 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 2982 : 1998 : R2004 | Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils |
| ASTM D 2273 : 2008 | Standard Test Method for Trace Sediment in Lubricating Oils |
| ASTM D 7155 : 2020 | Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils |
| ASTM D 7843 : 2021 | Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry |
| ASTM D 2668 : 2002 | Standard Test Method for 2,6-<i>di-tert</i>-Butyl-<i> p</i>-Cresol and 2,6-<ital>di-tert</ital>-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption |
| ASTM D 6810 : 2007 | Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 3524 : 1990 : R1999 | Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography |
| ASTM D 2982 : 1998 | Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils |
| ASTM D 2272 : 2014 : REV A | Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
| ASTM D 1169 : 1995 | Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids |
| ASTM D 2896 : 2006 | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| ASTM D 7464 : 2014 | Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing |
| ASTM D 4378 : 2013 | Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines |
| ASTM D 1401 : 2021 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 4052 : 1996 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM D 4739 : 2008 : EDT 1 | Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration |
| ASTM D 6304 : 2003 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration |
| ASTM D 2668 : 1996 | Standard Test Method for 2,6-Ditertiary-Butyl Para Cresol and 2,6-Ditertiary-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption |
| ASTM D 7546 : 2015 | Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor |
| ASTM D 4378 : 2008 | Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines |
| ASTM D 2272 : 2009 | Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
| ASTM D 7155 : 2018 | Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils |
| ASTM D 7843 : 2012 | Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry |
| ASTM D 5185 : 2009 | Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 445 : 2001 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity) |
| ASTM D 2272 : 2014 | Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
| ASTM D 445 : 2021 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D 2896 : 2015 | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| ASTM D 1401 : 2012 : EDT 1 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 2273 : 2008 : R2012 | Standard Test Method for Trace Sediment in Lubricating Oils |
| ASTM E 1064 : 2004 : REV A | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM D 1169 : 2002 : EDT 1 | Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids |
| ASTM D 7414 : 2018 | Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry |
| ASTM D 6971 : 2004 | Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 3427 : 2006 | Standard Test Method for Air Release Properties of Petroleum Oils |
| ASTM D 2422 : 1997 : R2013 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| ASTM D 2273 : 2005 | Standard Test Method for Trace Sediment in Lubricating Oils |
| ASTM D 2896 : 2007 | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| ASTM D 3427 : 2007 | Standard Test Method for Air Release Properties of Petroleum Oils |
| ASTM D 5185 : 2002 : EDT 1 | Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 2272 : 2002 | Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
| ASTM D 3427 : 2019 | Standard Test Method for Air Release Properties of Hydrocarbon Based Oils |
| ASTM D 1169 : 2019 | Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids |
| ASTM D 4378 : 1997 | Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines |
| ASTM D 1298 : 1985 : R1990 : EDT 1 | Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| ASTM D 943 : 1999 | Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils |
| ASTM D 7720 : 2011 : R2017 | Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination |
| ASTM D 2422 : 1997 : R2002 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| ASTM D 5185 : 2002 : EDT 2 | Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 1401 : 2018 : REV A | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 4739 : 2011 | Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration |
| ASTM D 1500 : 2004 : REV A | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 3427 : 2012 | Standard Test Method for Air Release Properties of Petroleum Oils |
| ASTM D 1500 : 2007 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 4739 : 2002 | Standard Test Method for Base Number Determination by Potentiometric Titration |
| ASTM D 1401 : 2012 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 4052 : 2015 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 445 : 2021 : EDT 1 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D 4057 : 1995 : R2000 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4739 : 2006 : REV A | Standard Test Method for Base Number Determination by Potentiometric Titration |
| ASTM D 7843 : 2016 | Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry |
| ASTM D 2272 : 2011 | Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
| ASTM D 3427 : 2014 | Standard Test Method for Air Release Properties of Petroleum Oils |
| ASTM D 1169 : 2019 : REV A | Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids |
| ASTM D 257 : 2014 : R2021 : EDT 1 | Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
| ASTM D 2896 : 2021 | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| ASTM D 1401 : 2010 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| ASTM D 4057 : 2006 : R2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 1533 : 2000 | Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration |
| ASTM E 1064 : 2016 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM D 6810 : 2021 | Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 2668 : 2007 : R2021 | Standard Test Method for 2,6-<emph type="bold"><emph type="ital">di-tert</emph></emph >-Butyl-<emph type="bold"><emph type="ital"> p</emph></emph>-Cresol and 2,6-<emph type="bold"><emph type="ital">di-tert</emph></emph>-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption |
| ASTM D 4052 : 2018 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 2273 : 2008 : R2016 | Standard Test Method for Trace Sediment in Lubricating Oils (Withdrawn 2023) |
| ASTM D 7464 : 2008 | Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing |
| ASTM D 3427 : 1999 | Standard Test Method for Air Release Properties of Petroleum Oils |
US$83.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.