• There are no items in your cart

ASTM D 6465 : 1999 : R2016

Current
Current

The latest, up-to-date edition.

Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

10-01-2016

CONTAINED IN VOL. 15.06, 2015 Defines design engineers, manufacturing/industrial engineers, and production managers in selecting the best-fit adhesive/sealant or bonding/sealing process.

1.1This guide is intended to assist design engineers, manufacturing/industrial engineers, and production managers in selecting the best-fit adhesive/sealant or bonding/sealing process. The guide takes into account environmental pollution prevention and occupational health and safety factors in a selection process.

1.2This guide is not to be considered as a database of acceptable materials. It will guide the engineers and managers through the adhesive/sealant material selection process, calling for engineers to customize their selection based on the bonding or sealing performance requirements for the specified application. A comprehensive selection process will allow for the establishment of a more efficient production process, and may eliminate unnecessary process steps. A total life cycle cost analysis or performance/cost of implementation study is recommended to compare the available alternatives.

1.3This guide is for aerospace and general purpose operations. It is not intended to be used for automotive, carpet, construction, electronics, medical/dental, optical, or structural and nonstructural wood applications. Note that this guide is not specifically for these applications, but the general methodology may be used in the selection process for these applications.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 14
DocumentType
Guide
Pages
7
ProductNote
Reconfirmed 2016
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 4497 : 2010 : R2018 Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method) (Withdrawn 2021)
ASTM D 1879 : 2006 Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation
ASTM D 1875 : 2003 : R2013 Standard Test Method for Density of Adhesives in Fluid Form
ASTM D 2240 : 2000 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 5656 : 2010 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D 4027 : 1998 : R2004 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM D 3164 : 1997 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D 2295 : 1996 : R2002 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D 1084 : 2016 : R2021 Standard Test Methods for Viscosity of Adhesives
ASTM D 6195 : 2003 : R2011 Standard Test Methods for Loop Tack
ASTM D 3632 : 1998 : R2011 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
ASTM D 1875 : 1995 Standard Test Method for Density of Adhesives in Fluid Form
ASTM D 3165 : 2007 : R2023 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM D 2293 : 1996 Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
ASTM D 4690 : 2012 : R2018 Standard Specification for Urea-Formaldehyde Resin Adhesives
ASTM D 2095 : 1996 : R2002 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D 4800 : 1994 : R2015 Standard Guide for Classifying and Specifying Adhesives
ASTM D 2293:1996:R2002 Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
ASTM D 3166 :1999 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
ASTM D 3278 : 2020 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM D 1338 : 1999 : R2011 Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
ASTM D 1151 : 2000 : R2013 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM D 3167 : 2010 : R2017 Standard Test Method for Floating Roller Peel Resistance of Adhesives
ASTM D 4027 : 1998 : R2019 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM D 4027 : 1998 : R2011 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM D 4690 : 2012 Standard Specification for Urea-Formaldehyde Resin Adhesives
ASTM D 1146 : 2000 TEST METHOD FOR BLOCKING POINT OF POTENTIALLY ADHESIVE LAYERS
ASTM D 4339 : 2001 : R2013 Standard Test Method for Determination of the Odor of Adhesives
ASTM D 5648 : 2001 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM D 1002 : 1999 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D 5648 : 2001 : R2019 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM D 1062 : 2008 : R2015 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D 2294 : 1996 : R2008 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D 2583 : 2013 : REV A Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor (Withdrawn 2022)
ASTM D 4317 : 1998 : R2004 Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives
ASTM D 3807 : 1998 : R2012 Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)
ASTM D 1084 : 2008 Standard Test Methods for Viscosity of Adhesives
ASTM D 4497 : 1994 : R2004 Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)
ASTM D 5649 : 2001 : R2008 Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
ASTM D 1781 : 1998 : R2012 Standard Test Method for Climbing Drum Peel for Adhesives
ASTM D 3166 : 1999 : R2005 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
ASTM D 1876 : 2008 : R2023 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
ASTM D 2674 : 1972 : R2004 : EDT 1 Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
ASTM D 3163 : 2001 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM D 5041 : 1998 : R2012 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
ASTM D 1144 : 1999 : R2021 Standard Practice for Determining Strength Development of Adhesive Bonds
ASTM D 2294 : 1996 : R2016 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D 1780 : 1999 Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
ASTM D 3167 : 1997 Standard Test Method for Floating Roller Peel Resistance of Adhesives
ASTM D 4317 : 2016 : REDLINE Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives
ASTM D 2651 : 1990 : R1995 Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
ASTM D 2093 : 2003 : R2017 Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
ASTM D 6195 : 2003 : EDT 1 Standard Test Methods for Loop Tack
ASTM D 3111 : 1999 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D 5041 : 1998 : R2019 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
ASTM D 3933 : 1998 : R2004 Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
ASTM D 5656 : 2001 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D 3164 : 2003 : R2011 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D 1876 : 2001 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
ASTM D 3807 : 1998 Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)
ASTM D 3111 : 2010 : R2018 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D 5267 : 1997 : R2012 Standard Test Method for Determination of Extrudability of Cartridge Adhesives
ASTM D 1995 : 1992 : R1998 : EDT 1 Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
ASTM D 4783 : 2001 Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 1995 : 1992 : R2017 Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
ASTM D 1151 : 2000 : R2022 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM D 2295 : 1996 : R2016 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D 1338 : 1999 : R2021 Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
ASTM D 1828 : 2001 : R2021 Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
ASTM D 3278 : 1996 : EDT 1 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM D 5267 : 1997 : R2017 Standard Test Method for Determination of Extrudability of Cartridge Adhesives
ASTM D 2918 : 1999 : R2012 Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
ASTM D 1994 : 2007 : R2015 Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives (Withdrawn 2021)
ASTM D 3931 : 1993 : REV A : R1999 : EDT 1 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
ASTM D 5041 : 1998 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
ASTM D 3528 : 1996 : R2002 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM D 3163 : 2001 : R2023 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM D 3929 : 2003 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D 1780 : 2005 : R2012 Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
ASTM D 4501 : 2001 : EDT 1 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D 1062 : 2008 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D 1828 : 2001 : EDT 1 Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
ASTM D 5648 : 2001 : R2014 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM D 1828 : 2001 Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
ASTM D 3528 : 1996 : R2016 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM D 1338:1999 Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
ASTM D 2240 : 2004 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1995 : 1992 : R2011 Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
ASTM D 1084 : 2016 Standard Test Methods for Viscosity of Adhesives
ASTM D 1002 : 2010 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D 1144 : 1999 : R2011 Standard Practice for Determining Strength Development of Adhesive Bonds
ASTM D 5041 : 1998 : R2004 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
ASTM D 6195 : 2022 Standard Test Methods for Loop Tack
ASTM D 5657 : 2007 : R2014 Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
ASTM D 5363 : 2003 : R2008 Standard Specification for Anaerobic Single-Component Adhesives (AN)
ASTM D 5656 : 2004 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D 2583 : 2006 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D 907 : 2015 Standard Terminology of Adhesives
ASTM D 3167 : 2003 : REV A : R2004 Standard Test Method for Floating Roller Peel Resistance of Adhesives
ASTM D 2979 : 2001 Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine
ASTM D 4783 : 2001 : EDT 1 Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 1995 : 1992 : R2004 Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
ASTM D 3310 : 2000 : R2006 Standard Test Method for Determining Corrosivity of Adhesive Materials
ASTM D 1183 : 2003 : R2019 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D 1146 : 2000 : R2007 Standard Test Method for Blocking Point of Potentially Adhesive Layers
ASTM D 905 : 2008 : R2021 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D 1310 : 2014 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM D 1062 : 1996 : EDT 1 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D 1876 : 2000 : EDT 1 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
ASTM D 3762 : 2003 : R2010 Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test) (Withdrawn 2019)
ASTM D 1875 : 2003 Standard Test Method for Density of Adhesives in Fluid Form
ASTM D 1151 : 2000 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM D 3632 : 1998 : R2004 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
ASTM D 4501 : 1995 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D 5267 : 1997 : R2005 Standard Test Method for Determination of Extrudability of Cartridge Adhesives
ASTM D 2979 : 2016 Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine (Withdrawn 2019)
ASTM D 3983 : 1998 : R2011 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM D 5649 : 1994 Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
ASTM D 1144 : 1999 : R2016 Standard Practice for Determining Strength Development of Adhesive Bonds
ASTM D 2919 : 2000 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D 3983 : 1998 : R2019 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM D 5657 : 2001 Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
ASTM D 905 : 2008 : R2013 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D 4499 : 2007 : R2015 Standard Test Method for Heat Stability of Hot-Melt Adhesives (Withdrawn 2021)
ASTM D 1876 : 2008 : R2015 : EDT 1 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
ASTM D 1146 : 2000 : R2013 Standard Test Method for Blocking Point of Potentially Adhesive Layers
ASTM D 3933 : 1998 Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
ASTM D 1310 : 1986 : R1997 : EDT 1 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM D 2674 : 1972 : R1998 Standard Test Methods for Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
ASTM D 4499 : 1995 : R2000 Standard Test Method for Heat Stability of Hot-Melt Adhesives
ASTM D 1084 : 2016 : REDLINE Standard Test Methods for Viscosity of Adhesives
ASTM D 2919 : 2001 : R2023 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D 5657 : 2007 : R2023 Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
ASTM D 3762 : 2003 Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)
ASTM D 2674 : 1972 : R2021 Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
ASTM D 1184 : 1998 : R2004 Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
ASTM D 3278 : 1982 : EDT 1 Standard Test Methods for Flash Point of Liquids by Setaflash Closed-Cup Apparatus
ASTM D 3278 : 2021 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM D 4800 : 1994 : R1999 Standard Guide for Classifying and Specifying Adhesives
ASTM D 2583 : 2013 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D 6361 : 1998 Standard Guide for Selecting Cleaning Agents and Processes
ASTM D 4497 : 1994 : R1999 Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)
ASTM D 2240 : 2004 : EDT 1 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1337 : 1996 Standard Test Method for Storage Life of Adhesives by Consistency and Bond Strength
ASTM D 4501 : 2001 : R2009 : EDT 1 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D 1310 : 2001 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM D 1828 : 1996 Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
ASTM D 4783 : 1998 : REV A Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 1002 : 2005 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D 4562 : 2001 : R2013 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM D 2295 : 1996 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D 2556 : 2014 : R2018 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry
ASTM D 3929 : 2003 : R2023 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D 3931 : 2008 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
ASTM D 5656 : 2010 : R2017 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D 4497 : 2010 Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)
ASTM D 3929 : 2003 : R2010 : EDT 1 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D 1781 : 1998 Standard Test Method for Climbing Drum Peel for Adhesives
ASTM D 4339 : 2001 Standard Test Method for Determination of the Odor of Adhesives
ASTM D 1183 : 1996 : EDT 1 Standard Test Methods for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D 1916 : 1993 : R1997 Standard Test Method for Penetration of Adhesives (Withdrawn 2005)
ASTM D 1879 : 2006 : R2014 Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation
ASTM D 2919 : 2001 : R2014 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D 56 : 2021 : REV A Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D 3983 : 1998 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM D 2556 : 2011 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties
ASTM D 3933 : 1998 : R2010 Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
ASTM D 5363 : 2016 : REDLINE Standard Specification for Anaerobic Single-Component Adhesives (AN)
ASTM D 5573 : 1999 : R2005 Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints
ASTM D 4498 : 2007 : R2015 Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives (Withdrawn 2021)
ASTM D 1994 : 2007 Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives
ASTM D 2295 : 1996 : R2008 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D 2557 : 1998 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55&#176C (-450 to -67&#176F)
ASTM D 3167 : 2010 Standard Test Method for Floating Roller Peel Resistance of Adhesives
ASTM D 2651 : 2001 Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
ASTM D 4689 : 2012 : R2018 Standard Specification for Adhesive, Casein-Type
ASTM D 5656 : 1995 : R2000 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D 4499 : 2007 Standard Test Method for Heat Stability of Hot-Melt Adhesives
ASTM D 3166 : 1999 : R2012 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
ASTM D 4317 : 2016 Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives
ASTM D 907 : 2015 : R2023 Standard Terminology of Adhesives
ASTM D 3121 : 1994 : R1999 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
ASTM D 1310 : 2014 : REDLINE Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM D 3310 : 2000 Standard Test Method for Determining Corrosivity of Adhesive Materials
ASTM D 1337:2010 Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
ASTM D 3632 : 1998 : R2019 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
ASTM D 5868 : 2001 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
ASTM D 1002 : 2010 : R2019 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D 3166 : 1999 : R2020 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
ASTM D 3164 : 2003 : R2017 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D 3807 : 1998 : R2019 Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)
ASTM D 1994 : 1995 : R2000 Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives
ASTM D 1828 : 2001 : R2007 Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
ASTM D 56 : 2016 : REV A Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D 3310 : 2000 : R2023 Standard Test Method for Determining Corrosivity of Adhesive Materials
ASTM D 5649 : 2015 Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
ASTM D 6195 : 1997 Standard Test Methods for Loop Tack
ASTM D 3167 : 2003 : REV A Standard Test Method for Floating Roller Peel Resistance of Adhesives
ASTM D 2557 : 1998 : R2017 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from −267.8 to −55°C (−450 to −67°F)
ASTM D 1781 : 1998 : R2021 Standard Test Method for Climbing Drum Peel for Adhesives
ASTM D 2556 : 1993 : REV A : R2005 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties
ASTM D 4689 : 2012 Standard Specification for Adhesive, Casein-Type
ASTM D 1184 : 1998 Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
ASTM D 4339 : 2001 : R2007 Standard Test Method for Determination of the Odor of Adhesives
ASTM D 2979 : 2000 Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine
ASTM D 4498 : 2007 Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives
ASTM D 3929 : 2003 : R2015 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D 2240 : 2015 : R2021 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2556 : 1993 : REV A : R1997 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties
ASTM D 5649 : 2015 : R2023 Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
ASTM D 1338 : 1999 : R2016 Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
ASTM D 1337 : 2010 : R2021 Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
ASTM D 4501 : 2001 : R2014 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D 4562 : 2001 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM D 1183 : 2003 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D 1875 : 2003 : R2008 : EDT 1 Standard Test Method for Density of Adhesives in Fluid Form
ASTM D 3164 : 2003 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D 3433 : 1999 : R2005 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D 2240 : 2002 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 4689 : 1999 Standard Specification for Adhesive, Casein-Type
ASTM D 4498 : 2000 Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives
ASTM D 5573 : 1999 Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints
ASTM D 3163 : 2001 : R2008 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM D 2093 : 2003 : R2011 Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
ASTM D 907 : 2015 : REDLINE Standard Terminology of Adhesives
ASTM D 1310 : 2001 : R2007 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM D 950 : 1998 Standard Test Method for Impact Strength of Adhesive Bonds (Withdrawn 2003)
ASTM D 4317 : 2016 : R2023 Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives
ASTM D 5868 : 2001 : R2023 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
ASTM D 5363 : 2016 Standard Specification for Anaerobic Single-Component Adhesives (AN)
ASTM D 3165 : 2000 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM D 5868 : 2001 : R2014 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
ASTM D 56 : 2021 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D 2240 : 2015 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1876 : 2000 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
ASTM D 3433 : 1999 : R2020 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D 2240 : 2003 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1879 : 1999 Standard Practice for Exposure of Adhesive Specimens to High-Energy Radiation
ASTM D 6195 : 2003 Standard Test Methods for Loop Tack
ASTM D 1310 : 2014 : R2021 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM D 3433 : 1999 : R2012 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D 3310 : 2000 : R2014 Standard Test Method for Determining Corrosivity of Adhesive Materials
ASTM E 229 : 1997 Standard Test Method for Shear Strength and Shear Modulus of Structural Adhesives (Withdrawn 2003)
ASTM D 1338 : 1999 : R2005 Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
ASTM D 1151 : 2000 : R2006 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM D 905 : 1998 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D 4501 : 2001 : R2023 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D 5363 : 2003 : EDT 1 Standard Specification for Anaerobic Single-Component Adhesives (AN)
ASTM D 1144 : 1999 : R2005 Standard Practice for Determining Strength Development of Adhesive Bonds
ASTM D 4690 : 1999 Standard Specification for Urea-Formaldehyde Resin Adhesives
ASTM D 2294 : 1996 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D 2557 : 1998 : R2010 : EDT 1 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55&#176C (-450 to -67&#176F)
ASTM D 1875 : 2003 : R2018 Standard Test Method for Density of Adhesives in Fluid Form
ASTM D 3929 : 1996 : EDT 1 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D 2240 : 2002 : REV B Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2095 : 1996 : R2023 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D 905 : 2008 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D 4317 : 1998 Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives
ASTM D 3121 : 2006 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball (Withdrawn 2015)
ASTM D 2979 : 2001 : R2009 Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine
ASTM D 6195 : 2003 : R2019 Standard Test Methods for Loop Tack
ASTM D 1002 : 2001 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D 3807 : 1998 : R2004 Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)
ASTM D 2095 : 1996 : R2015 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D 5868 : 2001 : R2008 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
ASTM D 4783 : 2001 : R2013 Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 4783 : 2001 : R2021 Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 3528 : 1996 : R2008 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM D 1828 : 2001 : R2013 Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
ASTM D 5657 : 2007 Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
ASTM D 2918 : 1999 : R2005 Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
ASTM D 5649 : 2015 : REDLINE Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
ASTM D 3931 : 2008 : R2023 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
ASTM D 3121 : 2017 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
ASTM D 4501 : 2001 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D 2557 : 1998 : R2004 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55&#176C (-450 to -67&#176F)
ASTM D 2240 : 2015 : EDT 1 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2294 : 1996 : R2002 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D 3121 : 2005 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
ASTM D 56 : 2022 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D 4800 : 1994 : R2011 Standard Guide for Classifying and Specifying Adhesives
ASTM D 3762 : 1998 Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)
ASTM D 3111 : 2010 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D 1084 : 1997 Standard Test Methods for Viscosity of Adhesives
ASTM D 2919 : 2001 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D 1146 : 2000 : R2018 : EDT 1 Standard Test Method for Blocking Point of Potentially Adhesive Layers
ASTM D 3632 : 1998 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
ASTM D 2918 : 1999 Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
ASTM D 1781 : 1998 : R2004 Standard Test Method for Climbing Drum Peel for Adhesives
ASTM D 2674 : 1972 : R2012 Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
ASTM D 2095 : 1996 : EDT 1 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D 4800 : 1994 : R2005 Standard Guide for Classifying and Specifying Adhesives
ASTM D 1183 : 2003 : R2011 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D 2240 : 2005 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 56 : 1987 Standard Test Method for Flash Point by Tag Closed Tester
ASTM D 4339 : 2001 : R2018 Standard Test Method for Determination of the Odor of Adhesives
ASTM D 5657 : 1995 Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
ASTM D 5573 : 1999 : R2019 Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints
ASTM D 3931 : 2008 : R2015 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
ASTM D 4562 : 2001 : R2019 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM D 3983 : 1998 : R2004 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM D 1780 : 2005 Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
ASTM D 5648 : 2001 : R2008 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM D 3165 : 2007 : R2014 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM D 1879 : 2006 : R2023 Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation
ASTM D 4562 : 1990 : R1995 : EDT 1 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM D 2093 : 1997 Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
ASTM D 2093 : 2003 Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
ASTM D 2240 : 2005 : R2010 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 4562 : 2001 : R2007 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM D 1062 : 2002 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D 1337 : 2004 Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
ASTM D 5267 : 1997 Standard Test Method for Determination of Extrudability of Cartridge Adhesives
ASTM D 3163 : 1996 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM D 2095 : 1996 : R2008 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D 4317 : 1998 : R2011 Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives
ASTM D 2651 : 2001 : R2016 Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
ASTM D 4339 : 1995 Standard Test Method for Determination of the Odor of Adhesives
ASTM D 3528 : 1996 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM D 2919 : 2001 : EDT 1 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D 4783 : 2001 : R2008 Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 3278 : 1996 : R2004 : EDT 1 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM D 2651 : 2001 : R2008 Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
ASTM D 3933 : 1998 : R2017 Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
ASTM D 1184 : 1998 : R2012 Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
ASTM D 2240 : 2002 : REV A Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 4800 : 1994 : R2023 Standard Guide for Classifying and Specifying Adhesives
ASTM D 5868 : 1995 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
ASTM D 2583 : 2007 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D 1146 : 2000 : R2018 Standard Test Method for Blocking Point of Potentially Adhesive Layers
ASTM D 4497 : 1994 : R2004 : EDT 1 Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)
ASTM D 3167 : 2003 Standard Test Method for Floating Roller Peel Resistance of Adhesives
ASTM D 5363 : 1997 Standard Specification for Anaerobic Single-Component Adhesives (AN)
ASTM D 3931 : 1993 : REV A : R2005 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
ASTM D 2556 : 2014 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry
ASTM D 5573 : 1999 : R2012 Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints
ASTM D 5363 : 2003 Standard Specification for Anaerobic Single-Component Adhesives (AN)
ASTM D 1062 : 2008 : R2023 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D 3111 : 2019 Standard Practice for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test
ASTM D 4027 : 1998 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM D 1876 : 2008 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
ASTM D 3433 : 1999 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D 2919 : 2001 : R2007 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D 5648 : 1994 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM D 2583 : 1995 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D 1337 : 2010 : R2016 Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
ASTM D 3165 : 2007 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM D 1144:1999 Standard Practice for Determining Strength Development of Adhesive Bonds
ASTM D 3278 : 1996 : R2011 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus (Withdrawn 2020)
ASTM D 1184 : 1998 : R2020 Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
ASTM D 5649 : 2001 Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
ASTM D 5656 : 2004 : EDT 1 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D 3163 : 2001 : R2014 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM D 2293 : 1996 : R2016 Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)

View more information
US$63.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.