Name: ASTM D 6667 : 2021
Brand: ASTM
Price: 69.00 USD

Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

05-05-2021

Publisher

American Society for Testing and Materials

1.1This test method covers the determination of total volatile sulfur in gaseous hydrocarbons and liquefied petroleum (LP) gases. It is applicable to analysis of natural, processed, and final product materials. Precision has been determined for sulfur in gaseous hydrocarbons in the range of 1 mg/kg to 100 mg/kg and for sulfur in LP gases in the range of 1 mg/kg to 196 mg/kg (Note 1).

Note 1:An estimate of pooled limit of quantification (PLOQ), information regarding sample stability and other general information derived from the interlaboratory studies on precision can be referenced in the ASTM research reports.2^,3

1.2This test method may not detect sulfur compounds that do not vaporize under the conditions of the test.

1.3This test method is applicable for total volatile sulfur determination in LP gases containing less than 0.35 % (mass/mass) halogen(s).

1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See 3.1 and Sections 6 and 7 for specific warning statements.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 02
DocumentType	Test Method
Pages	12
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 6667 : 2014 : R2019 ASTM D 6667 : 2014 : R2019

ASTM D 7901 : 2020	Standard Specification for Dimethyl Ether for Fuel Purposes
ASTM D 1835 : 2020	Standard Specification for Liquefied Petroleum (LP) Gases
ASTM D 7455 : 2019	Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
ASTM D 7756 : 2019	Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
ASTM D 7578 : 2020	Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 7166 : 2010 : R2015	Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels
ASTM D 5273 : 2018	Standard Guide for Analysis of Propylene Concentrates

ASTM D 2598 : 2021	Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
ASTM D 2421 : 2021	Standard Practice for Interconversion of Analysis of C<emph type="ital"><inf>5</inf ></emph> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
ASTM D 2163 : 2023 : EDT 1	Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
ASTM D 6299 : 2021	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2022 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 1265 : 2023 : REV A	Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
ASTM D 6299 : 2023 : REV A	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3700 : 2021	Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 6299 : 2023 : EDT 1	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6299 : 2023	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 5287 : 2008 : R2015	Standard Practice for Automatic Sampling of Gaseous Fuels (Withdrawn 2024)
ASTM D 2421 : 2021 : EDT 1	Standard Practice for Interconversion of Analysis of C<emph type="ital"><inf>5</inf ></emph> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
ASTM D 1265 : 2011 : R2017 : EDT 1	Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
ASTM D 6299 : 2022	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 2163 : 2014 : R2019	Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
ASTM D 3700 : 2016	Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 1265 : 2023	Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
ASTM D 6299 : 2020 : REV A	Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 2163 : 2023	Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
ASTM D 1265 : 2022	Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method