• There are no items in your cart

ASTM D 6992 : 2016 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
Available format(s)

PDF

Language(s)

English

Published date

03-22-2016

CONTAINED IN VOL. 04.13, 2018 Defines accelerated testing for tensile creep, and tensile creep-rupture properties using the Stepped Isothermal Method (SIM).

1.1This test method covers accelerated testing for tensile creep, and tensile creep-rupture properties using the Stepped Isothermal Method (SIM).

1.2The test method is focused on geosynthetic reinforcement materials such as yarns, ribs of geogrids, or narrow geotextile specimens.

1.3The SIM tests are laterally unconfined tests based on time-temperature superposition procedures.

1.4Tensile tests are to be completed before SIM tests and the results are used to determine the stress levels for subsequent SIM tests defined in terms of the percentage of Ultimate Tensile Strength (TULT). Additionally, the tensile test can be designed to provide estimates of the initial elastic strain distributions appropriate for the SIM results.

1.5Ramp and Hold (R+H) tests may be completed in conjunction with SIM tests. They are designed to provide additional estimates of the initial elastic and initial rapid creep strain levels appropriate for the SIM results.

1.6This method can be used to establish the sustained load creep and creep-rupture characteristics of a geosynthetic. Results of this method are to be used to augment results of Test Method D5262 and may not be used as the sole basis for determination of long term creep and creep-rupture behavior of geosynthetic material.

1.7The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 35
DocumentType
Redline
Pages
8
PublisherName
American Society for Testing and Materials
Status
Current

ASTM F 2881 : 2011 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM F 2922 : 2013 : EDT 1 Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
ASTM F 2947 : 2012 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F 2922 : 2013 Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
DD ISO/TS 13434:2008 Geosynthetics. Guidelines for the assessment of durability
AASHTO M 330 : 2013 SPECIFICATION FOR POLYPROPYLENE PIPE, 300- TO 1500-MM (12- TO 60-IN.) DIAMETER
AASHTO R 69 : 2015 PRACTICE FOR DETERMINATION OF LONG-TERM STRENGTH FOR GEOSYNTHETIC REINFORCEMENT
ASTM F 2922 : 2013 : R2018 Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
ASTM F 2787 : 2013 Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
CSA B1800 SERIES : 2015 THERMOPLASTIC NON-PRESSURE PIPING COMPENDIUM
ASTM D 5819 : 2018 : REDLINE Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM F 2881 : 2011 : R2015 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM F 2947 : 2012 : EDT 1 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ISO/TR 20432:2007 Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement
ASTM F 2787 : 2013 : R2018 Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
AASHTO PP 66 : 2013 PRACTICE FOR DETERMINATION OF LONG-TERM STRENGTH FOR GEOSYNTHETIC REINFORCEMENT
PD ISO/TR 20432:2007 Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement
B184 SERIES-17 Polymeric subsurface stormwater management structures
ASTM F 2881/F2881M : 2018 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM F 2947/F2947M : 2014-03 SPECIFICATION FOR 150 TO 1500 MM [6 TO 60 IN.] ANNULAR CORRUGATED PROFILE-WALL POLYETHYLENE (PE) PIPE AND FITTINGS FOR SANITARY SEWER APPLICATIONS
ISO/TS 13434:2008 Geosynthetics Guidelines for the assessment of durability

ASTM D 4439 : 2017-08 TERMINOLOGY FOR GEOSYNTHETICS
ASTM D 2990 : 2017 : REDLINE Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
ASTM D 4595 : 2017 : REDLINE Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.