• There are no items in your cart

ASTM D 76/D76M : 2021

Current
Current

The latest, up-to-date edition.

Standard Specification for Tensile Testing Machines for Textiles
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

08-17-2021

1.1This specification covers the operating characteristics of three types of tensile testing machines used for the determination of the force-elongation properties of textile materials. These types of tensile testing machines are:

1.1.1Constant-rate-of-extension, CRE.

1.1.2Constant-rate-of-traverse, CRT.

1.1.3Constant-rate-of-loading (force), CRL.

1.2Specifications for tensile testing machines to measure other tensile-related properties of textile materials not covered by this standard are given in the ASTM standards using those machines.

1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

1.4The following safety hazards caveat pertains only to the test methods described in this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 13
DocumentType
Standard
Pages
7
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 4846 : 1996 : R2021 Standard Test Method for Resistance to Unsnapping of Snap Fasteners
ASTM D 6818 : 2021 Standard Test Method for Tensile Properties of Rolled Erosion Control Products
ASTM D 7003/D7003M : 2003 : R2021 Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes
ASTM D 8199 : 2020 Standard Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control
ASTM D 5494 : 1993 : R2018 Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes
ASTM D 5169 : 1998 : R2021 Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
ASTM D 6637/D6637M : 2015 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
ASTM E 4 : 2020 Standard Practices for Force Verification of Testing Machines<br>
ASTM D 4533/D4533M : 2015 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM D 6636 : 2001 : R2018 Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
ASTM D 4833/D4833M : 2007 : R2020 Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products
ASTM D 6496/D6496M : 2020 Standard Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners
ASTM E 2098/E2098M : 2013 : R2018 Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
ASTM D 7747/D7747M : 2011 : R2018 Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method
ASTM D 7749 : 2011 : R2018 Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method
ASTM D 7556 : 2010 : R2019 Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
ASTM D 8172 : 2018 Standard Test Method for Shear and Peel Strength of Solvent-Welded Seams with Nonreinforced Geomembranes
ASTM D 7179 : 2018 Standard Test Method for Determining Geonet Breaking Force
ASTM D 4594/D4594M : 1996 : R2020 Standard Test Method for Effects of Temperature on Stability of Geotextiles
ASTM D 4632/D4632M : 2015 : REV A Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
ASTM D 7004/D7004M : 2003 : R2021 Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes
ASTM D 6241 : 2014 Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D 6768/D6768M : 2020 Standard Test Method for Tensile Strength of Geosynthetic Clay Liners
ASTM D 4884/D4884M : 2014 : REV A Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles
ASTM D 7005/D7005M : 2016 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
ASTM D 4885 : 2001 : R2018 Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM D 7842/D7842M : 2012 : R2021 Standard Test Method for Holding Strength of Tack and Prong Fastener Attached Buttons

ASTM D 123 : 2019 Standard Terminology Relating to Textiles
ASTM E 4 : 2021 Standard Practices for Force Calibration and Verification of Testing Machines
ASTM D 123 : 2023 Standard Terminology Relating to Textiles

View more information
US$63.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.