• There are no items in your cart

ASTM D 808 : 2016 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)
Available format(s)

PDF

Language(s)

English

Published date

06-17-2016

CONTAINED IN VOL. 05.01, 2016 Specifies the determination of chlorine in lubricating oils and greases, including new and used lubricating oils and greases containing additives, and in additive concentrates.

1.1This test method covers the determination of chlorine in lubricating oils and greases, including new and used lubricating oils and greases containing additives, and in additive concentrates. Its range of applicability is 0.1 m% to 50 m% chlorine. The procedure assumes that compounds containing halogens other than chlorine will not be present.

1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.2.1The preferred units are mass percent.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Attention is called to specific warning statements incorporated in the test method.

Committee
D 02
DocumentType
Redline
Pages
6
PublisherName
American Society for Testing and Materials
Status
Current

ASTM E 1219 : 2016 : REDLINE Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
ASTM D 5177 : 1991 : R1996 Standard Guide for Waste Acceptance at Hazardous Waste Incinerators (Withdrawn 2005)
MIL-L-46152 Revision E:1990 LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, ADMINISTRATIVE SERVICE, METRIC
P-C-111 Revision D:1977 CARBON REMOVING COMPOUND
MIL L 21260 : D LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE AND BREAK IN
MIL F 24951 : B FUEL OIL RECLAIMED
MIL L 2105 : D LUBRICATING OIL, GEAR, MULTI PURPOSE
MIL-PRF-46167 Revision D:2005 LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, ARCTIC
ASTM D 7578 : 2015-06 GUIDE FOR CALIBRATION REQUIREMENTS FOR ELEMENTAL ANALYSIS OF PETROLEUM PRODUCTS AND LUBRICANTS
I.S. EN 14582:2016 CHARACTERIZATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS
ASTM E 1209 : 2010 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process
ASTM E 1208 : 2016 : REDLINE Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process
02/106396 DC : DRAFT NOV 2002 BS EN 14582 - CHARACTERIZATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS
ASTM E 1418 : 2016 : REDLINE Standard Practice for Visible Penetrant Testing Using the Water-Washable Process
ASTM E 1210 : 2016 : REDLINE Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process
BS EN 62321-3-2:2014 Determination of certain substances in electrotechnical products Screening. Total bromine in polymers and electronics by Combustion. Ion Chromatography
ASTM E 1220 : 2016 : REDLINE Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process
MIL-PRF-21260 Revision E:1998 LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE BREAK-IN
MIL-PRF-24951 Revision B:1995 FUEL OIL RECLAIMED
FM 6930 : 2009 FLAMMABILITY CLASSIFICATION OF INDUSTRIAL FLUIDS
SAE J 2361 : 1998 LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATION BREAK-IN
ASTM A 771/A771M : 1995 Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components
CSA B139 : 2015 INSTALLATION CODE FOR OIL-BURNING EQUIPMENT
ASTM A 826/A826M : 1995 Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components
MIL-PRF-11090 Revision K:2016 CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT
PREN 14582 : DRAFT 2015 CHARACTERIZATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS
I.S. EN 62321-3-2:2014 DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 3-2: SCREENING - TOTAL BROMINE IN POLYMERS AND ELECTRONICS BY COMBUSTION - ION CHROMATOGRAPHY
UNE-EN 14582:2016 Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods
BS EN 14582:2007 Characterization of waste. Halogen and sulfur content. Oxygen combustion in closed systems and determination methods
EN 14582:2016 Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods
05/30133797 DC : DRAFT MAY 2005 BS EN 14582 - CHARACTERISATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS
MIL L 9000 : H LUBRICATING OIL, SHIPBOARD INTERNAL COMBUSTION ENGINE, HIGH OUTPUT DIESEL
15/30319011 DC : DRAFT APR 2015 BS EN 14582 - CHARACTERIZATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS
MIL C 11090 : F (1) CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT, SELF-EMULSIFYING
MIL L 2104 : F LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT TACTICAL SERVICE
SAE MS 1000 : 2013 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION
SAE J 2359 : 1998 LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, MILITARY COMBAT/TACTICAL SERVICE
EN 62321-3-2:2014 Determination of certain substances in electrotechnical products - Part 3-2: Screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography
SAE J 311 : 2000 FLUID FOR PASSENGER CAR TYPE AUTOMATIC TRANSMISSIONS

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.