• There are no items in your cart

ASTM D 8147 : 2017

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines
Available format(s)

Hardcopy , PDF

Superseded date

03-27-2024

Language(s)

English

Published date

02-28-2018

CONTAINED IN VOL. 05.05, 2018 Specifies specialized property requirements to produce special-purpose aviation distillate test fuels that are intended only for engineering and certification testing of aircraft, engines, and aircraft equipment.

1.1This specification is intended to support purchasing agencies when formulating specifications for purchases of aviation distillate fuel under contract.

1.2This specification defines specialized property requirements to produce special-purpose aviation distillate test fuels that are intended only for engineering and certification testing of aircraft, engines, and aircraft equipment. Use of this specification for engineering and certification testing of aircraft is not mandatory. Its use is at the discretion of the aircraft manufacturer, engine manufacturer, or certification authorities when determining criteria for validation of aircraft equipment design.

1.3This specification defines special-purpose test fuels that may be used to evaluate the operability, performance and durability of aviation compression-ignition engines when operating with fuels of marginal performance. The aviation distillate test fuels defined in this specification are not intended for general purpose use in aircraft. This specification also lists acceptable additives for aviation distillate special-purpose test fuels.

1.4Specification D8147 is directed at civil applications, and maintained as such, but may be adopted for military, government, or other specialized uses.

1.5This specification can be used as a standard in describing the quality of aviation distillate fuel from production to the aircraft. However, this specification does not define the quality assurance testing and procedures necessary to ensure that fuel continues to comply with this specification after batch certification.

1.6This specification does not include all fuels satisfactory for aviation compression-ignition (CI) engines.

1.7The values stated in SI units are to be regarded as standard.

1.7.1Exception—Other units of measurement are included in this standard.

1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.9This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 02
DocumentType
Standard
Pages
7
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

ASTM D 6890 : 2015 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 3241 : 2008 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 3948 : 2011 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 2622 : 1992 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 4176 : 2021 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 3241 : 2009 : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3241 : 2019 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3338 : 1992 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 3241 : 2005 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 5453 : 2009 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 1322 : 1997 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 3241 : 2020 : REV C Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 7153 : 2005 : R2010 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
ASTM D 2622 : 1987 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 6079 : 2011 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ASTM D 3240 : 2011 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 1655 : 2008 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 6079 : 2004 : EDT 1 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ASTM D 3948 : 2014 : R2018 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 5972 : 2005 : R2010 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D 5972 : 1999 : REV A Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D 3240 : 2015 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 3828 : 2002 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 3120 : 1996 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 3227 : 2000 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 1319 : 1989 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Absorption
ASTM D 1319 : 2008 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 1298 : 2012 : REV A Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 6890 : 2018 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4171 : 1998 Standard Specification for Fuel System Icing Inhibitors
ASTM D 6890 : 2021 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4529 : 2017 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 3120 : 2008 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 5453 : 2008 : REV B Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 5453 : 2000 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 2386 : 1997 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 4171 : 2003 : R2010 Standard Specification for Fuel System Icing Inhibitors
ASTM D 4809 : 2000 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASHRAE 79 : 0 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
ASTM D 3241 : 2020 : REV B Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1655 : 2011 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 4176 : 1993 : R1997 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
IP 529 : 2015 DETERMINATION OF THE FREEZING POINT OF AVIATION FUELS - AUTOMATIC LASER METHOD
ASTM D 7042 : 2019 : EDT 1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 1655 : 2012 Standard Specification for Aviation Turbine Fuels
ASTM D 2276 : 2006 : R2014 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D 1266 : 1998 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 3241 : 2001 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 1655 : 2006 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 4176 : 2004 : R2019 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 4171 : 2021 Standard Specification for Fuel System Icing Inhibitors
ASTM D 4052 : 1996 : R2002 : EDT 1 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D 5972 : 2002 : EDT 1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D 86 : 2023 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 6890 : 2003 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 3828 : 2012 : REV A Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 7042 : 2012 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 3828 : 1998 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D 1298 : 2012 : REV B Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 5453 : 2004 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 6890 : 2006 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 1655 : 2006 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 1319 : 2018 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 1322 : 2019 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
ASTM D 3241 : 2006 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 1655 : 2021 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2018 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 86 : 2020 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 2624 : 2006 : REV A Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 1655 : 2005 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2017 Standard Specification for Aviation Turbine Fuels
ASTM D 5453 : 2012 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4952 : 2002 : R2007 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 3227 : 2016 : REDLINE Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 4294 : 2010 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 4052 : 2018 : REV A Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 3241 : 2014 : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3828 : 2007 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 4171 : 2011 Standard Specification for Fuel System Icing Inhibitors
ASTM D 1298 : 2012 : REV B : R2017 : EDT 1 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 3241 : 2002 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 1319 : 2014 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 4809 : 2018 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 2887 : 2006 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 1655 : 2014 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3948 : 2004 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 4529 : 2001 : R2006 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 1655 : 2001 Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2014 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1655 : 2011 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3242 : 1998 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 6890 : 2022 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 5006 : 2011 : R2021 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 4809 : 2013 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 6379 : 1999 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates-High Performance Liquid Chromatography Method with Refractive Index Detection
ASTM D 3241 : 2017 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1266 : 2013 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 3828 : 2016 : REV A : R2021 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 3338 : 2000 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 7042 : 2016 : EDT 2 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 3948 : 2014 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 2622 : 1998 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 3338 : 2004 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 2386 : 2015 : EDT 1 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 1655 : 2020 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 7345 : 2017 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
ASTM D 1319 : 1999 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 3227 : 2002 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 86 : 2018 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 3241 : 2020 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1840 : 2007 : R2013 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D 4171 : 2016 Standard Specification for Fuel System Icing Inhibitors
ASTM D 7153 : 2005 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
ASTM D 1655 : 2022 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3240 : 2005 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 7042 : 2010 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 2386 : 2005 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 3828 : 2007 : REV A Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 1298 : 1999 : R2005 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 1655 : 2006 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 2386 : 2006 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 4052 : 2009 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 5453 : 2008 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 2386 : 2006 : R2012 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 4809 : 2009 : REV A : EDT 1 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 1298 : 2012 : REV B : R2017 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 6890 : 2007 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 3241 : 2018 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 6890 : 2011 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 1298 : 2012 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 1655 : 2022 Standard Specification for Aviation Turbine Fuels
ASTM D 7154 : 2015 : REDLINE Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
ASTM D 1266 : 1987 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
IP 336 : 2015 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
ASTM D 3241 : 2014 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 2624 : 2021 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 2622 : 2008 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 7042 : 2016 : EDT 1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 445 : 2021 : EDT 2 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 4952 : 1997 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 3240 : 2022 : REV A Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 3241 : 2015 : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 93 : 2019 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D 3241 : 2017 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1655 : 2015 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 6890 : 2012 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4809 : 2000 : R2005 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 1322 : 2015 : EDT 1 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 1298 : 1999 : EDT 2 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 1655 : 2008 Standard Specification for Aviation Turbine Fuels
ASTM D 1322 : 2022 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
ASTM D 445 : 2017 : REV A Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 7153 : 2015 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
ASTM D 4529 : 2001 : R2011 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 3240 : 1991 : R2001 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 4529 : 1995 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 1655 : 2002 Standard Specification for Aviation Turbine Fuels
ASTM D 1319 : 2002 : REV A Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 86 : 2019 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 5453 : 2005 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 6079 : 2004 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ASTM D 2887 : 1999 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 1840 : 2007 : R2017 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D 3240 : 1991 : R1996 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 7154 : 2005 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
ASTM D 1655 : 2006 Standard Specification for Aviation Turbine Fuels
ASTM D 6890 : 2016 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 3241 : 2023 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1840 : 2022 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D 2624 : 2021 : REV A Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 1655 : 2016 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2010 Standard Specification for Aviation Turbine Fuels
ASTM D 6890 : 2013 : REV B Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 1655 : 2017 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 2887 : 2006 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 4952 : 2012 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 4952 : 2023 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 1655 : 2000 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 3120 : 2008 : R2019 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 7042 : 2020 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 3241 : 2019 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 6890 : 2010 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 2386 : 2001 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 1840 : 2003 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D 6079 : 2018 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ASTM D 3242 : 2007 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 5972 : 2002 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D 3227 : 2013 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 3948 : 2008 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 3240 : 2022 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 2887 : 2022 : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 86 : 2012 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
ASTM D 1655 : 2015 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2009 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 2887 : 2014 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 93 : 1990 : EDT 1 Standard Test Methods for Flash Point by Pensky-Martens Closed Tester
ASTM D 5006 : 2003 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 7345 : 2008 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method
ASTM D 2887 : 2001 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 3828 : 2012 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 445 : 1988 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)
ASTM D 1298 : 1999 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 7153 : 2015 : EDT 1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
ASTM D 4809 : 1995 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 5453 : 2006 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 2624 : 2007 : REV A Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 86 : 2017-06 TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE
ASTM D 2276 : 2005 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D 6890 : 2008 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 3241 : 2015 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 4176 : 2004 : R2009 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 1655 : 2015 Standard Specification for Aviation Turbine Fuels
ASTM D 4294 : 2008 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 1322 : 2015 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 3242 : 2001 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 3948 : 2020 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 3948 : 2013 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 1840 : 2001 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D 1655 : 2007 Standard Specification for Aviation Turbine Fuels
ASTM D 7042 : 2011 : REV A Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 3120 : 2003 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 2386 : 2003 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 4052 : 2011 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 7153 : 2022 : REV A Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
ASTM D 2887 : 2022 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 6890 : 2010 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 56 : 2021 : REV A Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D 1655 : 2015 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 1319 : 2003 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 4052 : 2016 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 1322 : 2012 : EDT 2 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 7154 : 2015 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
ASTM D 1322 : 2012 : EDT 1 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 3242 : 2008 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 1655 : 2021 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 7042 : 2021 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 4809 : 2009 : REV A Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 3242 : 2005 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 3828 : 2016 : REV A Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 3241 : 2008 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 2622 : 2003 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 6890 : 2016 : EDT 1 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 2887 : 2019 : REV A : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 5453 : 2016 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4294 : 2008 : REV A Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 1319 : 2010 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 2624 : 2015 : REDLINE Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 6379 : 2011 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
ASTM D 3241 : 2001 : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 6890 : 2011 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 1655 : 2012 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 86 : 2020 : REV B Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 2624 : 2000 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 4171 : 2016 : REV A Standard Specification for Fuel System Icing Inhibitors
ASTM D 6890 : 2009 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 2887 : 2001 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 4176 : 2022 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 56 : 2016 : REV A Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D 5006 : 2011 : R2016 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 6890 : 2011 : REV B Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4529 : 2017 : REDLINE Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 4294 : 2002 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 3120 : 2003 : REV A Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 1298 : 1999 : EDT 1 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 7042 : 2004 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 7524 : 2010 : R2015 Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method
ASTM D 1655 : 2014 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2015 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 86 : 2016 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 1655 : 1985 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1840 : 2007 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D 1655 : 2016 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 5453 : 2003 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 445 : 2019 : REV A Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 4952 : 2002 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 6890 : 2016 : EDT 2 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 3240 : 2015 : REDLINE Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 2887 : 2016 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 5006 : 1996 : R2001 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 7042 : 2019 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 6890 : 2013 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 2624 : 2001 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 2887 : 2008 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 5006 : 1996 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 1655 : 2004 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 4176 : 2021 : REV A Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 2887 : 2019 : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2018 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 3241 : 2005 : REV B Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 3948 : 2007 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 2887 : 2012 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 7345 : 2017 : REDLINE Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
ASTM D 3241 : 2002 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 4294 : 2016 : EDT 1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 5453 : 2016 : EDT 1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4176 : 2004 : R2014 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 6379 : 2021 : EDT 1 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
ASTM D 3241 : 2015 : EDT 2 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 7153 : 2022 : REV A : EDT 1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
ASTM D 2276 : 2006 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D 93 : 2016-07 TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER
ASTM D 2386 : 2015 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 4176 : 2020 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 1655 : 2016 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1322 : 2008 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 3241 : 2014 : REV B Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 7042 : 2012 : REV A Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 3948 : 2022 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 445 : 2019 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 4294 : 2008 : REV A : EDT 1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 1655 : 2021 Standard Specification for Aviation Turbine Fuels
ASTM D 4052 : 1996 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D 4294 : 1998 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 56 : 2021 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D 3828 : 2005 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 3948 : 2005 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 4809 : 2009 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 381 : 2019 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D 1655 : 2021 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 1322 : 2014 : REV A Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 2622 : 2010 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 7524 : 2010 Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels<span class='unicode'>—</span>High Performance Liquid Chromatograph (HPLC) Method
ASTM D 130 : 2018 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
ASTM D 1655 : 2004 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2014 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 381 : 2022 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D 1322 : 2014 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 7042 : 2016 : EDT 3 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 1655 : 2016 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 4294 : 2021 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 1655 : 2007 : EDT 1 Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2019 : REV B Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 4809 : 2006 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 6890 : 2003 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 2887 : 2019 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 93 : 2000 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D 1655 : 2000 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 445 : 2001 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
ASTM D 6379 : 2011 : REDLINE TEST METHOD FOR DETERMINATION OF AROMATIC HYDROCARBON TYPES IN AVIATION FUELS AND PETROLEUM DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION
ASTM D 7345 : 2007 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method
ASTM D 1840 : 1996 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D 2622 : 2021 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 1655 : 2013 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2015 : REV D : EDT 1 Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2002 : REV A : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 445 : 2021 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 2887 : 2019 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 1655 : 2019 Standard Specification for Aviation Turbine Fuels
ASTM D 2386 : 2018 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 2887 : 2013 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 3227 : 2004 : REV A : R2010 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 2887 : 2015 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 381 : 2012 : R2017 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D 3241 : 1998 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 5453 : 2019 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 3120 : 1996 : R2002 : EDT 1 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 86 : 2020 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 93 : 1985 Standard Test Method for Flash Point by Pensky-Martens Closed Tester
ASTM D 1840 : 2002 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D 2887 : 2015 : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2622 : 2007 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 2887 : 2004 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 5972 : 2023 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)<rangeref></rangeref >
ASTM D 6079 : 2002 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ASTM D 1655 : 2006 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 3227 : 2004 : REV A Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 3120 : 2006 : EDT 1 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
IP 498 : 2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
ASTM D 3828 : 2009 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 2622 : 1994 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 3948 : 1999 : REV A Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 2624 : 2006 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 3120 : 2006 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 4952 : 2009 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 1655 : 2003 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 6379 : 2004 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
ASTM D 3241 : 2011 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 56 : 2022 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D 7042 : 2012 : EDT 1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 6379 : 2021 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
ASTM D 1655 : 2014 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2003 Standard Specification for Aviation Turbine Fuels
ASTM D 2622 : 2005 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 6890 : 2012 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 1322 : 2015-06 TEST METHOD FOR SMOKE POINT OF KEROSINE AND AVIATION TURBINE FUEL
ASTM D 1655 : 2009 Standard Specification for Aviation Turbine Fuels
ASTM D 3241 : 2005 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 4052 : 2022 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 4294 : 2003 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM D 6890 : 2013 : REV B : EDT 1 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 7042 : 2021 : REV A Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 5006 : 2002 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 2887 : 2002 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 6890 : 2007 : REV B Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 7345 : 2014 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
ASTM D 6890 : 2015 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 3241 : 2013 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1655 : 2011 Standard Specification for Aviation Turbine Fuels
ASTM D 5453 : 2019 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 1298 : 1985 : R1990 : EDT 1 Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 56 : 1987 Standard Test Method for Flash Point by Tag Closed Tester
ASTM D 5972 : 2015 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D 1319 : 2015 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 445 : 2018 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 2386 : 2019 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 4294 : 2016 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 86 : 2015 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 2276 : 2022 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D 7042 : 2016 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 3241 : 2014 : REV B : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 7153 : 2022 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
ASTM D 6890 : 2015 : REV B Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 1655 : 2020 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3227 : 2004 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 2622 : 2016 : REDLINE Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 1319 : 2013 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 1655 : 2009 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2018 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 4952 : 2012 : R2017 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 1655 : 2020 Standard Specification for Aviation Turbine Fuels
ASTM D 4052 : 2015 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 2624 : 2009 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 3338 : 2005 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 445 : 2021 : EDT 1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D 6890 : 2013 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 7154 : 2005 : R2010 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
ASTM D 2887 : 2016 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 3120 : 2008 : R2014 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 1322 : 2012 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 1655 : 2018 Standard Specification for Aviation Turbine Fuels
ASTM D 7154 : 2015 : R2021 : EDT 1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
ASTM D 5006 :2011 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 2624 : 2002 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 2276 : 2000 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D 3242 : 2011 : R2017 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 3241 : 2016 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 6079 : 1999 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ASTM D 3227 : 2016 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 2887 : 2004 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 6890 : 2007 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 2624 : 2015 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 4529 : 2001 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 93 : 1997 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D 3241 : 2012 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 5006 : 2010 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 3338 : 2008 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 1266 : 2007 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 3338 : 1995 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 4176 : 2004 : EDT 1 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 5006 : 2010 : EDT 1 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 6890 : 2004 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 2887 : 2019 : REV A : EDT 2 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 4176 : 2002 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 7345 : 2016 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
ASTM D 3227 : 2002 : REV A Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 86 : 2017 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 2887 : 2003 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 1655 : 2019 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 5453 : 2003 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 5972 : 2016 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D 6079 : 2022 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ASTM D 3828 : 2016 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 5972 : 2005 : EDT 1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
IP 16 : 2015 DETERMINATION OF THE FREEZING POINT OF AVIATION FUELS - MANUAL METHOD
ASTM D 4171 : 2003 Standard Specification for Fuel System Icing Inhibitors
ASTM D 5972 : 2005 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D 1319 : 2019 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 1655 : 2013 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 4052 : 2018 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 2624 : 2022 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 130 : 2012 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
ASTM D 2624 : 2007 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 1266 : 2018 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 4294 : 1990 : R1998 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 1319 : 2002 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 3227 : 2023 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 3241 : 2004 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 2622 : 2016 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 7042 : 2014 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 4176 : 2004 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 93 : 2018 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D 5972 : 1999 : REV A : EDT 1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D 3241 : 2016 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3241 : 2011 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 6079 : 2011 : R2016 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ASTM D 5453 : 2008 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 1322 : 2018 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
ASTM D 3242 : 2011 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 3828 : 1997 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D 5453 : 2000 : EDT 1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 6379 : 2011 : R2019 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
ASTM D 4171 : 2022 Standard Specification for Fuel System Icing Inhibitors

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.