• There are no items in your cart

ASTM D 907 : 2015 : REDLINE

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Terminology of Adhesives
Available format(s)

PDF

Superseded date

10-13-2015

Language(s)

English

Published date

10-13-2015

CONTAINED IN VOL. 15.06, 2015 Defines a compilation of definitions used in the science and technology of the adhesives industry.

1.1This terminology standard is a compilation of definitions used in the science and technology of the adhesives industry. Terms that are generally understood or adequately defined in other readily available sources are not included.

1.2Any changes in this standard since 1988 are documented as follows:

1.2.1Appendix X1 gives a history of revisions made since 1988. Table X1.1 lists the terms that are affected as: (1) Terms Added, (2) Terms Revised, and (3) Terms Deleted.

1.2.1.1In Table X1.1, the year of publication in Volume 15.06 is shown in parentheses following the term.

1.2.2In the text of the standard, the year of publication is shown following each definition. Also, the following codes are included after the year of publication to describe the type change that was made: (A) Addition, (R) Revision, or (E) Edited.

1.2.3Deletions are shown in Appendix X1, suitably footnoted. The deleted terms do not appear in the text of the standard.

1.2.4Any special circumstances not covered by 1.2.2 and 1.2.3 are documented in Table X1.1, suitably footnoted.

Committee
D 14
DocumentType
Redline
Pages
13
PublisherName
American Society for Testing and Materials
Status
Superseded

ASTM D 1184 : 1998 : R2004 Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
ASTM D 1828 : 2001 : R2007 Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
ASTM F 826 : 1994 : R2010 Standard Specification for Tops, Furniture, Marine, Steel
ASTM D 5040 : 1990 : R2016 Standard Test Methods for Ash Content of Adhesives
ASTM D 4680 : 1998 : R2004 Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM D 1583 : 2001 : R2008 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D 1828 : 2001 Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
ASTM D 3434 : 2000 : R2006 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM D 5215 : 1993 : R2012 Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
ASTM F 2255 : 2005 : R2015 Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
ASTM D 2308 : 2007 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2834 : 1995 Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
ASTM D 3632 : 1998 : R2019 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
ANSI INCITS 322 : 2015 INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS
ASTM D 2295 : 1996 : R2008 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 4649 : 2003 Standard Guide for Selection and Use of Stretch Wrap Films
ASTM D 1582 : 1998 : R2017 Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives
ASTM D 5041 : 1998 : R2004 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
ASTM D 1579 : 2001 : R2013 Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives
ASTM D 7998 : 2015 Standard Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading
ASTM D 5572 : 1995 : R1999 Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
ASTM D 1144 : 1999 : R2016 Standard Practice for Determining Strength Development of Adhesive Bonds
ASTM D 1579 : 2001 : R2018 Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives
ASTM D 2294 : 1996 : R2016 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D 2339 : 1998 : R2011 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
ASTM D 1879 : 2006 : R2014 Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation
ASTM D 3658 : 2001 : R2016 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM D 4300 : 2001 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 897 : 2008 : R2016 Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM D 3069 : 1994 : R1999 : EDT 1 Standard Test Method for Delivery Rate of Aerosol Products
ASTM D 4800 : 1994 : R2011 Standard Guide for Classifying and Specifying Adhesives
ASTM D 1828 : 2001 : EDT 1 Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
ASTM D 2293 : 1996 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2095 : 1996 : R2008 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D 905 : 2008 : R2013 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D 1488 : 2000 : R2018 Standard Test Method for Amylaceous Matter in Adhesives
ASTM D 2303 : 1997 : R2004 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 1084 : 2016 : REDLINE Standard Test Methods for Viscosity of Adhesives
ASTM D 1338 : 1999 : R2011 Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
ASTM D 1781 : 1998 : R2004 Standard Test Method for Climbing Drum Peel for Adhesives
ASTM D 3023 : 1998 : R2011 Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents
ASTM D 6463 : 1999 Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM D 6412/D6412M : 1999 : R2012 Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials
ASTM D 2557 : 1998 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55&#176C (-450 to -67&#176F)
ASTM D 2318 : 1998 : R2008 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2294 : 1996 : R2002 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 3535 : 2007 : REV A Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
ASTM D 4027 : 1998 : R2019 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM D 2300 : 2008 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 3163 : 2001 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM D 6412/D6412M:1999 Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials
ASTM D 5751 : 1999 : R2005 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
CSA O112.9 : 2010 : R2014 EVALUATION OF ADHESIVES FOR STRUCTURAL WOOD PRODUCTS (EXTERIOR EXPOSURE)
ASTM D 5267 : 1997 Standard Test Method for Determination of Extrudability of Cartridge Adhesives
ASTM D 2339 : 1998 : R2017 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
ASTM D 3535 : 2007 Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
CSA O112.9 : 2010(R2019) EVALUATION OF ADHESIVES FOR STRUCTURAL WOOD PRODUCTS (EXTERIOR EXPOSURE)
ASTM D 5648 : 2001 : R2008 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM D 5267 : 1997 : R2005 Standard Test Method for Determination of Extrudability of Cartridge Adhesives
ASTM D 2295 : 1996 : R2016 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D 4499 : 2007 Standard Test Method for Heat Stability of Hot-Melt Adhesives
ASTM D 2919 : 2001 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D 1779 : 1998 : R2017 Standard Specification for Adhesive for Acoustical Materials
ASTM D 3933 : 1998 Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
ASTM D 3658 : 2001 : R2008 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM F 824 : 1993 : R1999 Standard Specification for Tables, Mess, Marine, Steel
AASHTO MP 22 : 2013 : R2015 SPECIFICATION FOR FIBER-REINFORCED POLYMER COMPOSITE MATERIALS FOR HIGHWAY AND BRIDGE STRUCTURES
ASTM D 9 : 2012 : REDLINE Standard Terminology Relating to Wood and Wood-Based Products
ASTM D 5824 : 1998 : R2017 Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM D 6005 : 2003 Standard Test Method for Determining Slump Resistance of Carpet Adhesives
ASTM D 1144 : 1999 : R2005 Standard Practice for Determining Strength Development of Adhesive Bonds
ASTM D 3930 : 20081 Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
ASTM D 5267 : 1997 : R2017 Standard Test Method for Determination of Extrudability of Cartridge Adhesives
ASTM D 4501 : 2001 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D 1489 : 2009 Standard Test Method for Nonvolatile Content of Aqueous Adhesives
ASTM D 4499 : 2007 : R2015 Standard Test Method for Heat Stability of Hot-Melt Adhesives (Withdrawn 2021)
ASTM D 1582 : 1998 : R2004 Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives
ASTM D 899 : 2000 Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D 1490 : 2001 : R2013 Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
ASTM D 6465 : 1999 Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
ASTM D 2557 : 1998 : R2004 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55&#176C (-450 to -67&#176F)
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D 905 : 2008 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D 6004 : 2004 : R2011 Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives (Withdrawn 2020)
ASTM D 2919 : 2001 : R2007 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D 3807 : 1998 : R2004 Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)
ASTM D 5656 : 2010 : R2017 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D 2651 : 2001 : R2008 Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
ASTM D 2557 : 1998 : R2017 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from −267.8 to −55°C (−450 to −67°F)
ASTM D 3933 : 1998 : R2010 Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
ASTM D 3434 : 2000 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM D 6005 : 2003 : R2017 Standard Test Method for Determining Slump Resistance of Carpet Adhesives (Withdrawn 2017)
ASTM D 2835 : 1989 : R2007 Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
ASTM F 825 : 1993 : R2004 Standard Specification for Drawers, Furniture, Marine, Steel
ASTM D 3164M : 2003 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading (Withdrawn 2012)
ASTM D 4896 : 2001 : R2008 : EDT 1 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
ASTM D 4688 : 1999 : R2005 Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
ASTM D 1579 : 2001 Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives
ASTM D 3310 : 2000 : R2006 Standard Test Method for Determining Corrosivity of Adhesive Materials
ASTM D 6464 : 2003 : REV A : EDT 1 Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 4300 : 2001 : R2008 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM D 2339 : 1998 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
ASTM D 3632 : 1998 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
ASTM D 1579 : 2001 : R2008 Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives
ASTM D 903 : 1998 : R2017 Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
ASTM D 2918 : 1999 Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
ASTM D 4783 : 2001 : EDT 1 Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 1583 : 2001 : R2013 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM F 2458 : 2005 : R2015 Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants
ASTM D 4783 : 2001 : R2008 Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 899 : 2000 : R2007 Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D 1151 : 2000 : R2013 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM D 3166 :1999 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
ASTM D 3434 : 2000 : R2013 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM F 823 : 1993 : R1999 Standard Specification for Desk, Log, Marine, Steel, with Cabinet
ASTM D 3434 : 2000 : R2018 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM D 6411/D6411M : 1999 : R2005 Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
ASTM D 2293 : 1996 Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
ASTM D 5824 : 1998 : R2003 Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM D 5215 : 1993 : R1999 Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
ASTM D 1995 : 1992 : R1998 : EDT 1 Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
ASTM D 2294 : 1996 : R2002 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D 4783 : 2001 Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 1780 : 2005 Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
ASTM D 3808 : 2001 Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
ASTM D 6465 : 1999 : R2005 Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
ASTM D 1779 : 1998 Standard Specification for Adhesive for Acoustical Materials
ASTM D 5041 : 1998 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
ASTM D 1490 : 2001 Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
ASTM D 3163 : 2001 : R2008 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM D 4426:2001 Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating
ASTM D 5113 : 1997 : R2016 Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam
ASTM D 4688 : 1999 : R2013 Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
ASTM D 896 : 2004 Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents
ASTM D 1304 : 1999 Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation
ASTM D 4338:1997 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D 5572 : 1995 : R2005 Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
ASTM E 1605 : 2004 : R2012 Standard Terminology Relating to Lead in Buildings
ASTM D 4783 : 2001 : R2013 Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
ASTM D 6195 : 2003 : EDT 1 Standard Test Methods for Loop Tack
ASTM D 2293 : 1996 : R2002 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 7532 : 2009 : R2016 Standard Practice for Determination of Re-tack Ability of Carpet Adhesives
ASTM D 6464 : 2003 : REV A Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 1184 : 1998 : R2012 Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
ASTM D 3528 : 1996 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM D 3433 : 1999 : R2005 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D 2843 : 1999 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM D 4502 : 1992 : R1998 : EDT 1 Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints
ASTM D 1151 : 2000 : R2006 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM D 3164 : 2003 : R2017 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D 1304 : 1999 : R2005 Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation
ASTM D 905 : 2008 : EDT 1 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
ASTM D 1875 : 2003 : R2018 Standard Test Method for Density of Adhesives in Fluid Form
ASTM F 2256 : 2005 Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading
ASTM D 1876 : 2008 : R2015 : EDT 1 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
ASTM D 3932 : 1980 Practice for Control of the Application of Structural Fasteners When Attached by Hot Melt Adhesive (Withdrawn 1991)
ASTM D 4317 : 2016 : REDLINE Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives
ASTM D 1338 : 1999 : R2016 Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
ASTM D 3632 : 1998 : R2004 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
ASTM D 5657 : 2007 Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
ASTM D 2318 : 1998 : R2003 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 3929 : 2003 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D 2293 : 1996 : R2008 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 906 : 1998 Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
ASTM D 6411/D6411M:1999 Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
ASTM D 3110 : 1995 Specification for Adhesives Used in Laminate Joints for Nonstructural Glued Lumber Products (Withdrawn 1996)
ASTM D 2878 : 2010 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM D 1183 : 2003 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D 2295 : 1996 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 950 : 2003 Standard Test Method for Impact Strength of Adhesive Bonds
ASTM D 2293 : 1996 : R2016 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2303 : 1997 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 6325 : 1998 Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives
ASTM D 2288 : 1997 : R2001 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 4562 : 2001 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM D 4562 : 2001 : R2007 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM D 4426 : 2001 : R2006 Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating
ASTM F 2258 : 2005 : R2015 Standard Test Method for Strength Properties of Tissue Adhesives in Tension
ASTM D 2296 : 2001 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2295 : 1996 : R2016 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 4649 : 2003 : R2016 Standard Guide for Selection and Use of Stretch Wrap Films
ASTM F 822 : 1993 : R2017 Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine
ASTM D 1583 : 2001 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM F 825 : 1993 : R2010 Standard Specification for Drawers, Furniture, Marine, Steel
ASTM D 2293 : 1996 : R2016 Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
ASTM D 5267 : 1997 : R2012 Standard Test Method for Determination of Extrudability of Cartridge Adhesives
ASTM D 1994 : 2007 : R2015 Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives (Withdrawn 2021)
ASTM D 4502 : 1992 : R2004 Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints
ASTM D 3658 : 2001 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM F 2392 : 2004 : R2010 Standard Test Method for Burst Strength of Surgical Sealants
ASTM E 1605 : 2004 Standard Terminology Relating to Lead in Buildings
ASTM D 2339 : 1998 : R2004 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
ASTM D 903 : 1998 : R2004 Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
ASTM D 3482 : 2007 : REV A Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives
ASTM D 6383/D6383M : 1999 : R2011 : EDT 1 Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material
ASTM D 5649 : 2015 : REDLINE Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
ASTM D 6862 : 2011 : R2016 Standard Test Method for 90 Degree Peel Resistance of Adhesives
ASTM D 2294 : 1996 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D 4680 : 1998 Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM D 1875 : 2003 Standard Test Method for Density of Adhesives in Fluid Form
ASTM D 5574 : 1994 : R1999 : EDT 1 Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints
ASTM D 3983 : 1998 : R2004 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM D 3983 : 1998 : R2019 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM D 2093 : 2003 Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
ASTM D 6464 : 2003 Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 5868 : 2001 : R2014 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
ASTM D 3167 : 2010 Standard Test Method for Floating Roller Peel Resistance of Adhesives
ASTM D 3929 : 2003 : R2015 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM F 822 : 1993 : R2004 Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine
ASTM D 3165 : 2007 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM D 1779 : 1998 : R2004 Standard Specification for Adhesive for Acoustical Materials
ASTM D 5648 : 2001 : R2014 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM D 1995 : 1992 : R2004 Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
ASTM D 6383 : 1999 : R2005 Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material
ASTM D 3808 : 2001 : R2013 Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
ASTM D 3163 : 2001 : R2014 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM D 3762 : 2003 Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)
ASTM D 345 : 2002 Side bearings of the freight wagon bogies. General specifications
ASTM D 2845 : 2000 : R2004 : EDT 1 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock
ASTM D 2307 : 2007 : R2013 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 3983 : 1998 : R2011 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM D 5751 : 1999 : R2012 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
ASTM D 4896 : 2001 : R2016 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
ASTM D 6383/D6383M : 1999 : R2015 Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material
ASTM D 898 : 2005 Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids (Withdrawn 2006)
ASTM F 2392 : 2004 Standard Test Method for Burst Strength of Surgical Sealants
ASTM D 3070 : 2000 : R2005 Standard Test Method of Rapid Pressure Determination of Pressurized Products
ASTM D 3070 : 2000 : R2010 Standard Test Method of Rapid Pressure Determination of Pressurized Products
ASTM D 2919 : 2001 : R2014 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D 3807 : 1998 Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)
ASTM D 5868 : 2001 : R2008 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
ASTM F 782 : 2001 : R2012 Standard Specification for Doors, Furniture, Marine
ASTM D 2843 : 1999 : R2004 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM D 904 : 1999 : R2013 Standard Practice for Exposure of Adhesive Specimens to Artificial Light
ASTM D 2288 : 1997 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 1994 : 2007 Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives
ASTM D 1304 : 1999 : R2012 Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation
ASTM D 2919 : 2001 : EDT 1 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D 1781 : 1998 : R2012 Standard Test Method for Climbing Drum Peel for Adhesives
ASTM D 2300 : 2008 : R2017 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 3165 : 2007 : R2014 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM D 1151 : 2000 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM D 2319/D2319M : 1998 : R2013 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 5824 : 1998 Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM D 4426 : 2001 : R2013 Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating
ASTM C 1862 : 2017 Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures
ASTM D 6195 : 2003 : R2011 Standard Test Methods for Loop Tack
ASTM D 3535 : 2007 : REV A : R2013 Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
ASTM D 2295 : 1996 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D 2295 : 1996 : R2008 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D 4800 : 1994 : R2015 Standard Guide for Classifying and Specifying Adhesives
ASTM D 2093 : 2003 : R2011 Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
ASTM D 1337 : 2010 : R2016 Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
ASTM D 3167 : 2010 : R2017 Standard Test Method for Floating Roller Peel Resistance of Adhesives
ASTM D 2878 : 1995 : R2000 : EDT 1 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM D 2095 : 1996 : R2015 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D 906 : 1998 : R2011 Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
GOST R 52714:2018 Motor gasolines. Determination of individual and group hydrocarbon composition by capillary gas сhromatography method
ASTM D 996 : 2016 : REDLINE Standard Terminology of Packaging and Distribution Environments
ASTM D 2318 : 1998 : R2013 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 3076 : 2000 : R2010 Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
ASTM D 5405/D5405M : 1998 : R2011 : EDT 1 Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material
ASTM D 1780 : 2005 : R2012 Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
ASTM D 1146 : 2000 : R2007 Standard Test Method for Blocking Point of Potentially Adhesive Layers
ASTM D 5751 : 1999 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
ASTM D 2835 : 1989 : R2003 Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
ASTM D 3164 : 2003 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D 2094 : 2000 Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
ASTM D 4300 : 2001 : R2013 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
ASTM F 823 : 1993 : R2010 Standard Specification for Desk, Log, Marine, Steel, with Cabinet
ASTM F 823 : 1993 : R2017 Standard Specification for Desk, Log, Marine, Steel, with Cabinet
ASTM D 1144 : 1999 : R2011 Standard Practice for Determining Strength Development of Adhesive Bonds
ASTM D 5040 : 1990 : R2005 Standard Test Methods for Ash Content of Adhesives
ASTM D 904 : 1999 : R2005 Standard Practice for Exposure of Adhesive Specimens to Artificial Light
ASTM D 1337:2010 Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
ASTM D 7446 : 2009 Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials
ASTM F 2255 : 2005 Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
ASTM D 6004 : 2004 Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives
ASTM F 824 : 1993 : R2010 Standard Specification for Tables, Mess, Marine, Steel
ASTM D 3482 : 2007 : REV A : R2014 Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives
ASTM F 2458 : 2005 Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants
ASTM F 825 : 1993 : R1999 Standard Specification for Drawers, Furniture, Marine, Steel
ASTM D 7149 : 2005 : R2011 : EDT 1 Standard Practice for Determining the Freeze Thaw Stability of Adhesives
ASTM D 904 : 1999 : R2008 Standard Practice for Exposure of Adhesive Specimens to Artificial Light
ASTM D 1879 : 2006 Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation
ASTM D 1183 : 2003 : R2011 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D 7888 : 2013 Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings
ASTM D 3166 : 1999 : R2005 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
ASTM F 2523 : 2013 : REDLINE Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers
ASTM D 6396 : 1999 : R2012 Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees
ASTM D 6396 : 1999 : R2005 Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees
ASTM D 2094 : 2000 : EDT 1 Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
ASTM D 3808 : 2001 : R2007 Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
ASTM D 2293:1996:R2002 Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
ASTM D 2557 : 1998 : R2010 : EDT 1 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55&#176C (-450 to -67&#176F)
ASTM D 4680 : 1998 : R2011 Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM D 4501 : 2001 : EDT 1 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D 1876 : 2008 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
ASTM D 5574 : 1994 : R2012 Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints
ASTM F 2258 : 2005 : R2010 Standard Test Method for Strength Properties of Tissue Adhesives in Tension
ASTM D 4338 : 1997 : R2004 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D 5573 : 1999 : R2012 Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints
ASTM D 2294 : 1996 : R2008 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D 5405/D5405M : 1998 : R2015 Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material
ASTM D 6464 : 2003 : REV A : R2017 Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 2834 : 1995 : R2002 Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
ASTM D 6411/D6411M : 1999 : R2012 Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
ASTM D 4500 : 1995 Standard Test Method for Determining Grit, Lumps, or Undissolved Matter in Water-Borne Adhesives (Withdrawn 2001)
ASTM D 3528 : 1996 : R2016 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM D 4498 : 2007 : R2015 Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives (Withdrawn 2021)
ASTM D 3069 : 1994 : R2005 Standard Test Method for Delivery Rate of Aerosol Products
ASTM F 824 : 1993 : R2017 Standard Specification for Tables, Mess, Marine, Steel
ASTM D 2878 : 1995 : R2005 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM D 2295 : 1996 : R2002 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D 7966/D7966M : 2016 : REDLINE Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM D 4027 : 1998 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM D 5041 : 1998 : R2012 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
ASTM D 2296 : 2001 : R2006 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 3070 : 2000 Standard Test Method of Rapid Pressure Determination of Pressurized Products
ASTM D 5113 : 1997 : R2005 Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam
ASTM D 2310 : 2006 : R2012 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 3933 : 1998 : R2017 Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
ASTM D 4498 : 2007 Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives
ASTM D 1875 : 2003 : R2008 : EDT 1 Standard Test Method for Density of Adhesives in Fluid Form
ASTM D 3166 : 1999 : R2012 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
ASTM D 5574 : 1994 : R2005 Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints
ASTM D 2310 : 2006 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM C 557 : 2003 : R2009 : EDT 1 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 4649 : 2003 : R2009 Standard Guide for Selection and Use of Stretch Wrap Films
ASTM F 2392 : 2004 : R2015 Standard Test Method for Burst Strength of Surgical Sealants
ASTM D 1146 : 2000 TEST METHOD FOR BLOCKING POINT OF POTENTIALLY ADHESIVE LAYERS
ASTM D 3482 : 2007 Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives
ASTM F 2258 : 2005 Standard Test Method for Strength Properties of Tissue Adhesives in Tension
ASTM D 5999 : 1996 Standard Test Method for Noninterference of Adhesives in Repulping (Withdrawn 2003)
ASTM D 2835 : 1989 : R2017 Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
ASTM D 899 : 2000 : R2018 Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D 6463/D6463M : 2006 : R2012 Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM F 2468 : 2005 : R2011 Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
ASTM D 1062 : 2008 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D 4027 : 1998 : R2004 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM D 1582 : 1998 : R2011 Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives
ASTM D 1489 : 2009 : R2016 Standard Test Method for Nonvolatile Content of Aqueous Adhesives
ASTM D 1144:1999 Standard Practice for Determining Strength Development of Adhesive Bonds
DWA-M 143-20:2018 TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS
ASTM D 6325 : 1998 : R2004 Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives
ASTM D 4339 : 2001 : R2007 Standard Test Method for Determination of the Odor of Adhesives
ASTM D 6463/D6463M : 2006 Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM D 5040 : 1990 : R2011 Standard Test Methods for Ash Content of Adhesives
ASTM D 2651 : 2001 : R2016 Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
AASHTO MP 22 : 2013(R 2019) SPECIFICATION FOR FIBER-REINFORCED POLYMER COMPOSITE MATERIALS FOR HIGHWAY AND BRIDGE STRUCTURES
ASTM D 4501 : 2001 : R2014 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM D 2093 : 2003 : R2017 Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
ASTM D 1488 : 2000 : R2013 Standard Test Method for Amylaceous Matter in Adhesives
ASTM D 1874 : 2016 : REDLINE Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases
ASTM F 823 : 1993 : R2004 Standard Specification for Desk, Log, Marine, Steel, with Cabinet
ASTM D 3528 : 1996 : R2002 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM D 3528 : 1996 : R2008 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM D 3762 : 2003 : R2010 Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test) (Withdrawn 2019)
ASTM D 1338:1999 Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
ASTM D 6105 : 2004 : R2012 Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
ASTM D 4800 : 1994 : R1999 Standard Guide for Classifying and Specifying Adhesives
ASTM D 1995 : 1992 : R2011 Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
ASTM D 1582 : 1998 Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives
ASTM D 1875 : 2003 : R2013 Standard Test Method for Density of Adhesives in Fluid Form
ASTM D 2835 : 1989 : R1998 Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
ASTM D 2307 : 2007 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 3930 : 2008 : R2015 Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
ASTM D 2295 : 1996 : R2002 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
CSA O112.9 : 2010 EVALUATION OF ADHESIVES FOR STRUCTURAL WOOD PRODUCTS (EXTERIOR EXPOSURE)
ASTM D 1488 : 2000 : R2006 Standard Test Method for Amylaceous Matter in Adhesives
ASTM F 826 : 1994 : R1999 Standard Specification for Tops, Furniture, Marine, Steel
AASHTO TP 84 : 2011: R2014 METHOD OF TEST FOR EVALUATION OF ADHESIVE ANCHORS IN CONCRETE UNDER SUSTAINED LOADING CONDITIONS
ASTM D 6383 : 1999 : EDT 1 Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material
ASTM D 903 : 1998 : R2010 Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
ASTM D 2094 : 2000 : R2014 Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
ASTM D 7149 : 2005 : R2016 Standard Practice for Determining the Freeze Thaw Stability of Adhesives
ASTM C 557 : 2003 : EDT 1 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 2918 : 1999 : R2005 Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
ASTM D 1490 : 2001 : R2006 Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
ASTM D 2835 : 1989 : R2012 Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
ASTM D 5573 : 1999 Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints
ASTM D 2918 : 1999 : R2012 Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
ASTM D 2094 : 2000 : R2006 Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
ASTM D 5747/D5747M : 2008 : R2013 : EDT 1 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
ASTM D 2095 : 1996 : R2002 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D 3310 : 2000 : R2014 Standard Test Method for Determining Corrosivity of Adhesive Materials
ASTM F 2255 : 2005 : R2010 Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
ASTM D 896 : 2004 : R2010 : EDT 1 Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents
ASTM D 5868 : 2001 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
ASTM D 1062 : 2008 : R2015 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM F 2256 : 2005 : R2010 Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading
ASTM D 3433 : 1999 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D 1828 : 2001 : R2013 Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
ASTM C 557 : 2003 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 4688/D4688M : 2014 : REDLINE Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
ASTM D 1995 : 1992 : R2017 Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
ASTM D 906 : 1998 : R2004 Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
ASTM F 822 : 1993 FPECIFICATION FOR CHEST OF DRAWERS (CHIFFONIER), STEEL, MARINE
ASTM D 3632 : 1998 : R2011 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
ASTM D 1488 : 2000 Standard Test Method for Amylaceous Matter in Adhesives
ASTM D 7532:2009 Standard Practice for Determination of Re-tack Ability of Carpet Adhesives
ASTM D 2739 : 1997 : R2017 Standard Test Method for Volume Resistivity of Conductive Adhesives
ASTM D 906 : 1998 : R2017 Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
ASTM D 1916 : 1993 : R1997 Standard Test Method for Penetration of Adhesives (Withdrawn 2005)
ASTM D 3933 : 1998 : R2004 Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
ASTM D 1779 : 1998 : R2011 Standard Specification for Adhesive for Acoustical Materials
ASTM D 3807 : 1998 : R2012 Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)
ASTM D 950 : 2003 : R2011 Standard Test Method for Impact Strength of Adhesive Bonds
ASTM D 8089 : 2017 Standard Practice for Accelerated Heat Aging for Floor Covering Adhesives
GOST 849:2018 Primary nickel. SpecificationsE
ASTM D 4027 : 1998 : R2011 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM D 4800 : 1994 : R2005 Standard Guide for Classifying and Specifying Adhesives
ASTM D 4338 : 1997 : R2016 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D 2739 : 1997 Standard Test Method for Volume Resistivity of Conductive Adhesives
ASTM D 5648 : 2001 : R2019 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM D 1101 : 1997 : REV A Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
ASTM D 2308 : 2007 : R2013 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2319/D2319M : 1998 : R2008e1 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 5657 : 2007 : R2014 Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
ASTM D 5113:1997 Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam
ASTM F 782 : 2001 Standard Specification for Doors, Furniture, Marine
ASTM D 5215 : 1993 TEST METHOD FOR INSTRUMENTAL EVALUATION OF STAINING OF VINYL FLOORING BY ADHESIVES
ASTM D 5824 : 1998 : R2011 Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM D 3983 : 1998 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM D 2739 : 1997 : R2010 Standard Test Method for Volume Resistivity of Conductive Adhesives
ASTM D 1490 : 2001 : R2018 Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
ASTM D 2307 : 2007A TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2301 : 2010 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2301 : 2010 : R2017 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 6412/D6412M : 1999 : R2005 Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials
ASTM D 6005 : 2003 : R2008 Standard Test Method for Determining Slump Resistance of Carpet Adhesives
ASTM D 3164 : 2003 : R2011 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D 2851 : 2015 : REDLINE Standard Specification for Liquid Optical Adhesive
ASTM D 6005 : 2003 : R2009 Standard Test Method for Determining Slump Resistance of Carpet Adhesives
ASTM F 2458 : 2005 : R2010 Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants
ASTM D 1101 : 1997 : REV A : R2006 Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
ASTM D 1583 : 2001 : R2018 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM F 822 : 1993 : R2010 Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine
ASTM D 3310 : 2000 Standard Test Method for Determining Corrosivity of Adhesive Materials
ASTM D 4680 : 1998 : R2017 Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM D 7247 : 2017 : REDLINE Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D 1101 : 1997 : REV A : R2013 Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
ASTM D 2307 : 2007A : R2013 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2294 : 1996 : R2008 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM F 2468 : 2005 Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
ASTM D 5113 : 1997 : R2011 : EDT 1 Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam
ASTM D 2294 : 1996 : R2016 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2651 : 2001 Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
ASTM D 3433 : 1999 : R2012 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM F 2256 : 2005 : R2015 Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading
ASTM D 5363 : 2016 : REDLINE Standard Specification for Anaerobic Single-Component Adhesives (AN)
ASTM D 2288 : 1997 : R2001 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM F 782 : 2001 : R2007 Standard Specification for Doors, Furniture, Marine
ASTM D 7446 : 2009 : R2017 Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials
ASTM D 4339 : 2001 Standard Test Method for Determination of the Odor of Adhesives
ASTM D 6465 : 1999 : R2012 Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
ASTM D 5572 : 1995 : R2012 Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
ASTM D 4339 : 2001 : R2013 Standard Test Method for Determination of the Odor of Adhesives
ASTM F 822 : 1993 : R1999 Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine
ASTM D 897 : 2008 Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM D 4562 : 2001 : R2013 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM F 825 : 1993 : R2017 Standard Specification for Drawers, Furniture, Marine, Steel
ASTM D 6195 : 2003 Standard Test Methods for Loop Tack
ASTM D 904 : 1999 Standard Practice for Exposure of Adhesive Specimens to Artificial Light
ASTM D 6465 : 1999 : R2016 Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
ASTM D 3929 : 2003 : R2010 : EDT 1 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D 2739 : 1997 : R2004 Standard Test Method for Volume Resistivity of Conductive Adhesives
ASTM F 826 : 1994 : R2004 Standard Specification for Tops, Furniture, Marine, Steel
ASTM D 6464 : 2003 : REV A : R2009 : EDT 1 Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 1184 : 1998 Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
ASTM E 1420 : 1991 Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996)
ASTM D 896 : 2004 : R2017 Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents
ASTM D 3023 : 1998 : R2003 Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents
ASTM D 5215 : 1993 : R2005 Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
ASTM D 6105 : 2004 Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
ASTM D 2878 : 2010 : R2016 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM D 5573 : 1999 : R2005 Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints
ASTM F 824 : 1993 : R2004 Standard Specification for Tables, Mess, Marine, Steel
ASTM D 2095 : 1996 : EDT 1 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D 2843 : 1999 : R2004 : EDT 1 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM D 5040 : 1990 : R1997 : EDT 1 Standard Test Methods for Ash Content of Adhesives
ASTM D 4688 : 1999 Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
ASTM D 6396 : 19991 Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees
ASTM D 1338 : 1999 : R2005 Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
ASTM D 5648 : 2001 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM C 557 : 2003 : R2017 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 5656 : 2010 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D 7149 : 2005 Standard Practice for Determining the Freeze Thaw Stability of Adhesives
ASTM D 5405 : 1998 Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material
ASTM D 3121 : 2017 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
ASTM D 4896 : 2001 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
ASTM D 4501 : 2001 : R2009 : EDT 1 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM F 826 : 1994 : R2017 Standard Specification for Tops, Furniture, Marine, Steel
ASTM D 903 : 1998 Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
ASTM D 6862:2011 Standard Test Method for 90 Degree Peel Resistance of Adhesives
ASTM D 1781 : 1998 Standard Test Method for Climbing Drum Peel for Adhesives
ASTM D 4338 : 1997 : R2011 : EDT 1 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D 6325 : 1998 : R2011 Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives

ASTM D 618 : 2013 : REDLINE Standard Practice for Conditioning Plastics for Testing
ASTM D 4317 : 2016 : REDLINE Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives
ASTM D 4680 : 1998 Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM D 3983 : 1998 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM D 2990 : 2017 : REDLINE Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
ASTM D 4027 : 1998 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM D 5266 : 2013 : REDLINE Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.