• There are no items in your cart

ASTM D 93 : 2000

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
Available format(s)

Hardcopy , PDF

Superseded date

11-11-2014

Language(s)

English

Published date

12-31-2010

1.1 This test method covers the determination of the flash point of petroleum products in the temperature range from 40 to 360oC by a manual Pensky-Martens closed-cup apparatus or an automated Pensky-Martens closed-cup apparatus.

Note 1--Flash point determination as above 250oC can be performed, however, the precisions have not been determined above this temperature. For residual fuels, precisions have not been determined for flash points above 100oC.

1.2 Procedure A is applicable to distillate fuels (diesel, kerosene, heating oil, turbine fuels), new lubricating oils, and other homogeneous petroleum liquids not included in the scope of Procedure B.

1.3 Procedure B is applicable to residual fuel oils, cutback residua, used lubricating oils, mixtures of petroleum liquids with solids, petroleum liquids that tend to form a surface film under test conditions, or are petroleum liquids of such kinematic viscosity that they are not uniformly heated under the stirring and heating conditions of Procedure A.

Note 2--Liquids having kinematic viscosities less than 5.5 mm 2/s (cSt) at 40oC (104oF), do not contain suspended solids, or do not have a tendency to form a surface film while under test conditions, can be tested in accordance with Test Method D56.

1.4 This test method is applicable for the detection of contamination of relatively nonvolatile or nonflammable materials with volatile or flammable materials.

1.5 The values stated in SI units shall be regarded as the standard. The values given in parentheses are provided for information only.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazards statements, see 6.4, 7.1, 9.3, 9.4, 11.1.2, 11.1.4, and 12.1.2

Committee
D 02
DocumentType
Test Method
Pages
16
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 7544 : 2012 : R2017 Standard Specification for Pyrolysis Liquid Biofuel
ASTM F 1201 : 1988 : R2021 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0 °F
ASTM D 6987/D6987M : 2013 : REV A Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine (Withdrawn 2022)
ASTM D 7094 : 2017 : REV A Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM D 7960 : 2018 Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components
ASTM D 8048 : 2021 Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine
ASTM D 8147 : 2017 Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines
ASTM D 5452 : 2020 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM F 2417 : 2017 Standard Specification for Fire Safety for Candles
ASTM D 7484 : 2021 Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
ASTM D 6823 : 2008 : R2013 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
ASTM D 4485 : 2020 Standard Specification for Performance of Active API Service Category Engine Oils
ASTM F 3337 : 2019 Standard Guide for Taking Property and Behavior Measurements on Weathered Fractions of Oil
ASTM F 1200 : 1988 : R2016 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)
ASTM D 5966 : 2013 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine (Withdrawn 2022)
ASTM D 8175 : 2018 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester
ASTM C 461 : 2017 Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
ASTM D 6074 : 2015 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
ASTM D 7422 : 2019 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
ASTM D 6217 : 2018 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D 803 : 2015 : R2020 Standard Test Methods for Testing Tall Oil
ASTM D 7468 : 2020 Standard Test Method for Cummins ISM Test
ASTM D 3934 : 2020 Standard Test Method for Flash/No Flash Test—Equilibrium Method by a Closed-Cup Apparatus
ASTM D 6361/D6361M : 1998 : R2020 Standard Guide for Selecting Cleaning Agents and Processes
ASTM D 8085 : 2017 Standard Specification for Non-Aqueous Engine Coolant for Automobile and Light-Duty Service
ASTM D 7467 : 2020 : REV A Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 7566 : 2020 : REV C Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 5146 : 2010 : R2019 Standard Guide to Testing Solvent-Borne Architectural Coatings
ASTM D 5967 : 2019 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 7583 : 2016 Standard Test Method for John Deere Coolant Cavitation Test
ASTM D 2880 : 2020 Standard Specification for Gas Turbine Fuel Oils
ASTM D 3105 : 2017 Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
ASTM D 8074 : 2019 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
ASTM D 396 : 2020 Standard Specification for Fuel Oils
ASTM D 7665 : 2017 Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids
ASTM D 6751 : 2020 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7666 : 2012 : R2019 Standard Specification for Triglyceride Burner Fuel
ASTM D 4865 : 2019 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D 7156 : 2019 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
ASTM D 3730 : 2017 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
ASTM D 4733 : 2017 Standard Test Methods for Solventless Electrical Insulating Varnishes
ASTM D 6894 : 2013 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine (Withdrawn 2022)
ASTM D 4171 : 2016 : REV A Standard Specification for Fuel System Icing Inhibitors
ASTM D 8125 : 2018 Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE)
ASTM D 910 : 2020 : REV A Standard Specification for Leaded Aviation Gasolines
ASTM D 3955 : 2020 Standard Specification for Electrical Insulating Varnishes
ASTM F 718 : 2007 : R2017 Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
ASTM C 647 : 2019 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
ASTM D 1655 : 2020 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 6750 : 2019 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
ASTM D 333 : 2001 : R2013 Standard Guide for Clear and Pigmented Lacquers
ASTM D 6763 : 2016 Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents
ASTM D 7215 : 2016 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
ASTM D 5372 : 2020 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
ASTM D 4625 : 2016 : EDT 1 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
ASTM D 92 : 2018 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D 6468 : 2008 : R2019 Standard Test Method for High Temperature Stability of Middle Distillate Fuels
ASTM D 8046 : 2016 : REV A Standard Guide for Pumpability of Heat Transfer Fluids
ASTM D 3757 : 2016 Standard Guide for Preparing Specifications for Solvent-based Floor Polishes
ASTM D 6448 : 2016 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
ASTM D 115 : 2017 Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
ASTM D 6681 : 2017 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
ASTM D 3278 : 2020 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM E 502 : 2007 : R2013 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ASTM D 6923 : 2018 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure
ASTM D 3941 : 2020 Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus
ASTM D 6577 : 2015 : R2019 Standard Guide for Testing Industrial Protective Coatings
ASTM D 4054 : 2020 : REV C Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives
ASTM D 56 : 2016 : REV A Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM E 709 : 2015 Standard Guide for Magnetic Particle Testing
ASTM D 975 : 2020 : REV C Standard Specification for Diesel Fuel
ASTM F 715 : 2007 : R2018 Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage
ASTM D 6618 : 2016 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.