• There are no items in your cart

ASTM E 1007 : 2019

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
Available format(s)

Hardcopy , PDF

Superseded date

05-26-2021

Language(s)

English

Published date

05-06-2019

This test method covers the measurement of the transmission of impact sound generated by a standard tapping machine through floor-ceiling assemblies and associated supporting structures in field situations.

1.1This test method covers the measurement of the transmission of impact sound generated by a standard tapping machine through floor-ceiling assemblies and associated supporting structures in field situations.

1.2Results are measurable for all types of floor-ceiling assemblies, including those with floating-floor or suspended ceiling elements, or both, and floor-ceiling assemblies surfaced with any type of floor-surfacing or floor-covering materials.

1.3This test method defines several procedures and metrics to assess either the apparent performance of the nominally separating floor-ceiling or the isolation of a receiving room from the sound produced by the operation of the tapping machine. Several metrics are defined based on the measurements. Receiving room volume, absorption and source/receiving room adjacency control which metrics are reportable. Some metrics are reportable only for a receiving room directly below the tapping machine while others are reportable for any separated space that receives sound from the operation of the tapping machine. The source and receiving rooms as well as the floor-ceiling system are identified and described in the test report. All measured levels and derivative single number ratings include the effect of flanking transmission. Efforts to suppress flanking are not permitted. Available measures and their single number ratings are the impact sound pressure levels (ISPL) and impact sound rating (ISR), the reverberation time normalized impact sound pressure levels (RTNISPL) and normalized impact sound rating (NISR), and the absorption normalized impact sound pressure levels (ANISPL) and apparent impact insulation class (AIIC).

1.4The ISPL and ISR are measurable and reportable between any two specific rooms or usage areas where the source room area is large enough to accommodate the tapping machine positions and the receiving room volume is sufficiently large to accommodate the microphone positions. For all other measures and ratings in this standard, restrictions such as minimum room volume or dimensions or maximum room absorption are imposed. Thus, conditions exist that will not allow RTNISPL (NISR) or ANISPL (AIIC) to be determined.

1.5Where a separating floor-ceiling assembly is composed of parts that are constructed differently on the receiving room (ceiling) side, it is not possible to determine the ANISPL and AIIC of the individual elements or portions of the assembly. In this situation, the measurement will be of the composite structure, not of an individual element.

1.6Any single field measurement only represents the performance of the actual assembly tested and shall not be used alone to accurately predict how an identical or similar assembly might perform.

1.7The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

1.8The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.9This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.10This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 33
DocumentType
Test Method
Pages
12
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM E 2235 : 2004 : R2012 Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
ASTM E 966 : 2018 : REV A Standard Guide for Field Measurements of Airborne Sound Attenuation of Building Facades and Facade Elements
ASTM E 2813 : 2018 Standard Practice for Building Enclosure Commissioning
ASTM E 1374 : 2018 : EDT 1 Standard Guide for Office Acoustics and Applicable ASTM Standards
ASTM E 3133 : 2018 Standard Test Method for Laboratory Measurement of Floor Impact Sound Radiation Using the Tapping Machine
ASTM E 336 : 2019 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
ASTM E 2964 : 2019 Standard Test Method for Measurement of the Normalized Insertion Loss of Doors
ASTM E 989 : 2018 Standard Classification for Determination of Single-Number Metrics for Impact Noise
ASTM E 90 : 2009 : R2016 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
ASTM E 2179 : 2003 : R2016 Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors
ASTM C 634 : 2013 : EDT 1 Standard Terminology Relating to Building and Environmental Acoustics
ASTM E 492 : 2009 : R2016 : EDT 1 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
ASTM E 3133 : 2018 : EDT 1 Standard Test Method for Laboratory Measurement of Floor Impact Sound Radiation Using the Tapping Machine (Withdrawn 2023)
ASTM E 336 : 2020 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
ASTM C 634 : 2013 : R2021 Standard Terminology Relating to Building and Environmental Acoustics
ASTM E 3222 : 2020 : REV A Standard Classification for Determination of High-frequency Impact Sound Ratings

ASTM E 2235 : 2003 Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
ASTM E 1414 : 2000 : REV A Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
ASTM E 2235 : 2004 Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
ASTM E 2235 : 2004 : R2020 Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
ASTM E 2235 : 2004 : R2012 Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
ASTM C 634 : 2013 : R2021 Standard Terminology Relating to Building and Environmental Acoustics
ASTM E 2235 : 2004 : EDT 1 Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
ASTM E 1414 : 2006 Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.