• There are no items in your cart

ASTM E 1349 : 2006 : R2018

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry
Available format(s)

Hardcopy , PDF

Superseded date

11-12-2022

Language(s)

English

Published date

12-19-2018

1.1This test method covers the instrumental measurement of the reflection properties and color of object-color specimens by use of a spectrophotometer or spectrocolorimeter with a bidirectional optical measuring system, such as annular, circumferential, or uniplanar 45:0 or 0:45 geometry.

1.2This test method is generally suitable for any non-fluorescent, flat object-color specimen. It is especially recommended for measuring retroreflective specimens and specimens of intermediate gloss.

1.3Procedures required for the measurement of fluorescent object color are given in Practice E991 and Practice E2153.

1.4Procedures required for the measurement of color using filter colorimeters are contained in Test Method E1347 and this standard does not address those instruments.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 12
DocumentType
Test Method
Pages
4
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM E 805 : 2022 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM D 2066 : 2007 : R2020 Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
ASTM D 6578/D6578M : 2013 : R2018 Standard Practice for Determination of Graffiti Resistance
ASTM D 3134 : 2015 : R2019 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D 5215 : 1993 : R2021 Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
ASTM D 6531 : 2000 : R2019 Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
ASTM D 4960 : 2020 Standard Test Method for Evaluation of Color for Thermoplastic Pavement Marking Materials
ASTM D 2457 : 2021 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
ASTM D 8424 : 2021 Standard Guide for Retroreflective Composite Optics Laboratory Procedures
ASTM E 313 : 2020 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
ASTM D 5326 : 2022 Standard Test Method for Color Development in Tinted Latex Paints
ASTM D 2205 : 2020 Standard Guide for Selection of Tests for Traffic Paints
ASTM D 8367 : 2021 Standard Practice for Making a Laboratory Pavement Marking Sample Using a Pavement Marking and Drop-on Particles
ASTM D 8163 : 2018 Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings
ASTM D 2066 : 2007 : R2012 Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
ASTM D 2805 : 2011 : R2018 Standard Test Method for Hiding Power of Paints by Reflectometry
ASTM D 3451 : 2006 : R2017 Standard Guide for Testing Coating Powders and Powder Coatings
ASTM D 4303 : 2010 : R2016 Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials
ASTM D 4960 : 2008 : R2013 Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials
ASTM D 5215 : 1993 : R2012 Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
ASTM D 5326 : 1994 : REV A : R2013 Standard Test Method for Color Development in Tinted Latex Paints
ASTM D 5382 : 2002 : R2017 Standard Guide to Evaluation of Optical Properties of Powder Coatings
ASTM D 6441 : 2005 : R2016 Standard Test Methods for Measuring the Hiding Power of Powder Coatings
ASTM E 1247 : 2012 : R2017 Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry
ASTM E 805 : 2012 : REV A : R2017 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM E 313 : 2015 : EDT 1 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
ASTM D 6290 : 2019 Standard Test Method for Color Determination of Plastic Pellets
ASTM D 4956 : 2019 Standard Specification for Retroreflective Sheeting for Traffic Control
ASTM D 2205 : 2015 Standard Guide for Selection of Tests for Traffic Paints
ASTM D 2457 : 2013 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
ASTM D 3134 : 2015 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D 3424 : 2011 Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter (Withdrawn 2020)
ASTM F 2366 : 2012 Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus (Withdrawn 2020)
ASTM D 5531 : 2017 Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM E 179 : 2017 Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials
ASTM D 6131 : 2017 Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments
ASTM D 6628 : 2016 Standard Specification for Color of Pavement Marking Materials

ASTM E 805 : 2022 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM D 2244 : 2021 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E 2214 : 2017 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
ASTM D 2244 : 2015 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E 1767 : 1995 Standard Practice for Specifying the Geometry of Observations and Measurements to Characterize the Appearance of Materials (Withdrawn 2004)
ASTM E 1347 : 2006 : R2015 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM D 2244 : 2016 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2244 : 2015 : EDT 1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2244 : 2015 : REV A Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E 1767 : 2011 : R2017 Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials
ASTM E 2214 : 2018 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
ASTM E 1347 : 1997 Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry
ASTM E 2214 : 2016 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
ASTM E 1345 : 1998 : R2014 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM E 2153 : 2001 : R2017 Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color
ASTM E 2153 : 2001 Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color
ASTM E 1164 : 2012 : EDT 1 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM E 1164 : 1994 Standard Practice for Obtaining Spectrophotometric Data for Object-Color Evaluation
ASTM E 1345 : 1998 : R2019 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM E 991 : 2016 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
ASTM E 308 : 2018 Standard Practice for Computing the Colors of Objects by Using the CIE System
ASTM D 2244 : 2022 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E 1345 : 1998 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM E 991 : 2021 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
ASTM E 308 : 2022 Standard Practice for Computing the Colors of Objects by Using the CIE System
ASTM D 2244 : 1993 : R2000 Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
ASTM E 1164 : 2012 : R2017 : EDT 1 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM E 2214 : 2002 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments

View more information
US$66.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.