ASTM E 1401 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
03-15-2002
English
01-01-2013
CONTAINED IN VOL. 12.02, 2001 Describes the spectrophotometric analysis procedures for the dichromate system, and covers the preparation, testing and procedure for using the acidic aqueous silver dichromate dosimetry system to measure absorbed dose in water when exposed to ionizing radiations.
Committee |
E 10
|
DocumentType |
Standard
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
ISO 15557:1998 | Corresponds |
ISO 15558:1998 | Corresponds |
ISO 15561:1998 | Identical |
ISO 15556:1998 | Corresponds |
BS ISO 15561:1998 | Identical |
ASTM E 1707 : 2015 | GUIDE FOR ESTIMATING UNCERTAINITIES IN DOSIMETRY FOR RADIATION PROCESSING |
BS ISO 15563:1998 | Practice for use of the ethanol-chlorobenzene dosimetry system |
ISO 15565:1998 | Practice for use of a radiochromic liquid dosimetry system |
BS ISO 15556:1998 | Guide for selection and calibration of dosimetry systems for radiation processing |
ISO 15571:1998 | Practice for dosimetry in a gamma irradiation facility for radiation processing |
ASTM E 1205 : 2009 | PRACTICE FOR USE OF A CERIC-CEROUS SULFATE DOSIMETRY SYSTEM |
ASTM E 1261 : 2013 | GUIDE FOR SELECTION AND CALIBRATION OF DOSIMETRY SYSTEMS FOR RADIATION PROCESSING |
ASTM E 1276 : 2012 | PRACTICE FOR USE OF A POLYMETHYLMETHACRYLATE DOSIMETRY SYSTEM |
BS ISO 15571:1998 | Practice for dosimetry in a gamma irradiation facility for radiation processing |
ASTM E 1649 : 2015 | PRACTICE FOR DOSIMETRTY IN AN ELECTRON BEAM FACILITY FOR RADIATION PROCESSING AT ENERGIES BETWEEN 300 KEV AND 25 MEV |
ISO 15563:1998 | Practice for use of the ethanol-chlorobenzene dosimetry system |
ISO 15570:1998 | Practice for use of cellulose acetate dosimetry system |
ISO 15569:1998 | Practice for dosimetry in an electron-beam facility for radiation processing at energies between 300 keV and 25 MeV |
ASTM E 1702 : 2013 | PRACTICE FOR DOSIMETRY IN A GAMMA IRRADIATION FACILITY FOR RADIATION PROCESSING |
ASTM E 1608 : 2015 | Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV |
ASTM E 1538 : 2009 | PRACTICE FOR USE OF THE ETHANOL-CHLOROBENZENE DOSIMETRY SYSTEM |
BS ISO 15572:1998 | Guide for estimating uncertainties in dosimetry for radiation processing |
BS ISO 15554:1998 | Practice for dosimetry in gamma irradiation facilities for food processing |
ASTM E 2116 : 2013 | PRACTICE FOR DOSIMETRY FOR A SELF-CONTAINED DRY-STORAGE GAMMA-RAY IRRADIATOR |
ISO 15554:1998 | Practice for dosimetry in gamma irradiation facilities for food processing |
ISO 15555:1998 | Practice for use of a ceric-cerous sulfate dosimetry system |
ISO 15572:1998 | Guide for estimating uncertainties in dosimetry for radiation processing |
BS ISO 15570:1998 | Practice for use of cellulose acetate dosimetry system |
BS ISO 15567:1998 | Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing |
BS ISO 15555:1998 | Practice for use of a ceric-cerous sulfate dosimetry system |
BS ISO 15558:1998 | Practice for use of a polymethylmethacrylate dosimetry system |
BS ISO 15565:1998 | Practice for use of a radiochromic liquid dosimetry system |
BS ISO 15569:1998 | Practice for dosimetry in an electron-beam facility for radiation processing at energies between 300 keV and 25 MeV |
ISO 15567:1998 | Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing |
ASTM E 1540 : 2004 | PRACTICE FOR USE OF A RADIOCHROMIC LIQUID DOSIMETRY SYSTEM |
ASTM E 177 : 2014 : REDLINE | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
ASTM E 925 : 2009 : R2022 | Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm |
ASTM E 1205 : 2009 | PRACTICE FOR USE OF A CERIC-CEROUS SULFATE DOSIMETRY SYSTEM |
ASTM E 958 : 2013 : R2021 | Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers |
ASTM C 912 : 2017 : REDLINE | Standard Practice for Designing a Process for Cleaning Technical Glasses |
ASTM E 178 : 2016 : REV A | Standard Practice for Dealing With Outlying Observations |
ASTM E 275 : 2008 | Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers |
ASTM E 275 : 2008 : R2013 | Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers |
ASTM E 275 : 2008 : R2022 | Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers |
ASTM E 1026 : 2015 : REDLINE | Standard Practice for Using the Fricke Dosimetry System |
ASTM E 170 : 2020 | Standard Terminology Relating to Radiation Measurements and Dosimetry |
ASTM E 178 : 2021 | Standard Practice for Dealing With Outlying Observations |
ASTM E 925 : 2009 : R2014 | Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm |
ASTM E 1261 : 2013 | GUIDE FOR SELECTION AND CALIBRATION OF DOSIMETRY SYSTEMS FOR RADIATION PROCESSING |
ASTM E 1707 : 2015 | GUIDE FOR ESTIMATING UNCERTAINITIES IN DOSIMETRY FOR RADIATION PROCESSING |
ASTM E 178 : 2000 | Standard Practice for Dealing With Outlying Observations |
ASTM E 170 : 2017 : REDLINE | Standard Terminology Relating to Radiation Measurements and Dosimetry |
ASTM E 668 : 2013 : REDLINE | Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices |
ASTM E 666 : 2021 | Standard Practice for Calculating Absorbed Dose From Gamma or X Radiation |
ASTM E 170 : 2023 | Standard Terminology Relating to Radiation Measurements and Dosimetry |
ASTM E 178 : 1994 | Standard Practice for Dealing With Outlying Observations |
ASTM E 958 : 2013 | Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers |
ASTM E 666 : 2014 : REDLINE | Standard Practice for Calculating Absorbed Dose From Gamma or X Radiation |
ASTM E 666 : 2014 | Standard Practice for Calculating Absorbed Dose From Gamma or X Radiation |
ASTM E 958 : 2013 : REDLINE | Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.