• There are no items in your cart

ASTM E 1583 : 2017

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
Available format(s)

Hardcopy , PDF

Superseded date

10-13-2021

Language(s)

English

Published date

05-15-2019

CONTAINED IN VOL. 04.11, 2017 Defines the qualifications, including minimum requirements for personnel and equipment, duties, responsibilities, and services of laboratories engaged in the determination of lead in paint, dust, airborne particulates, and soil taken from and around buildings and related structures.

1.1This practice covers the qualifications, including minimum requirements for personnel and equipment, duties, responsibilities, and services of laboratories engaged in the determination of lead in paint, dust, airborne particulates, and soil taken from and around buildings and related structures.

1.2This practice has been developed consistent with Guides E548 and E994, to supplement ISO/IEC 17025.

1.3This practice contains notes that are explanatory and are not part of the mandatory requirements of the practice.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 22
DocumentType
Standard Practice
Pages
5
ProductNote
THIS STANDARD ALSO REFERS TO EPA SW-846,EPA 600/R-93/200
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM E 2271/E2271M : 2018 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings
ASTM E 3193 : 2019 Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)
ASTM E 3203 : 2019 Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
ASTM E 1864 : 2002 Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures (Withdrawn 2011)
ASTM E 2119 : 2016 Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices
ASTM E 2052 : 1999 Standard Guide for Evaluation, Management, and Control of Lead Hazards in Facilities (Withdrawn 2008)
ASTM E 1775 : 2020 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
ASTM E 2115 : 2019 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
ASTM E 3193 : 2021 Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)

ASTM E 631 : 2015 : REDLINE Standard Terminology of Building Constructions
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ASTM D 7035 : 2016 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM E 1613 : 2012 : REDLINE Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
ASTM E 2708 : 2017-03 TERMINOLOGY FOR ACCREDITATION AND CERTIFICATION
ASTM D 3335 : 1985 : REV A : R2020 Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM E 1645 : 2001 : R2007 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E 1645 : 2016 : REDLINE Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E 2708 : 2018 : REV A Standard Terminology for Accreditation and Certification
ASTM E 2708 : 2017 Standard Terminology for Accreditation and Certification
ASTM D 3335 : 1985 : REV A : R2009 Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM E 1644 : 2004 : R2012 : EDT 1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ISO 15202-3:2004 Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 3: Analysis
ASTM E 1613 : 2012 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021)
ASTM E 1644 : 2017 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E 1979 : 2004 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 1645 : 1994 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E 994 : 1995 Standard Guide for Calibration and Testing Laboratory Accreditation Systems General Requirements for Operation and Recognition (Withdrawn 2004)
ASTM D 6785 : 2013 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM D 7035 : 2010 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 6785 : 2002 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM E 1605 : 2001 : REV B Standard Terminology Relating to Lead in Buildings
ASTM E 1187 : 1997 Standard Terminology Relating to Conformity Assessment (Withdrawn 2006)
ASTM D 4185 : 2006 : R2011 Standard Practice for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
ASTM D 6785 : 2008 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM E 1645 : 2016 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E 1645 : 2001 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM D 4185 : 2017 Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
ASTM E 1979 : 2012 : R2016 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 1644 : 2017 : REDLINE Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ISO/IEC 17011:2004 Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies
ASTM D 7439 : 2008 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma<span class='unicode'>–</span>Mass Spectrometry
ASTM D 4185 : 1996 Standard Practice for Measurement of Metals in Workplace Atmosphere by Flame Atomic Absorption Spectrophotometry
ASTM E 1605 : 2000 Standard Terminology Relating to Lead in Buildings
ASTM E 1605 : 2018 Standard Terminology Relating to Lead in Buildings
ISO 8518:2001 Workplace air — Determination of particulate lead and lead compounds — Flame or electrothermal atomic absorption spectrometric method
ASTM E 1605 : 2018 : REV A Standard Terminology Relating to Lead in Buildings
ASTM E 1613 : 1999 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
ASTM D 3335 : 1985 : REV A : R1999 Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM E 1979 : 2017 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 1605 : 2001 : REV A Standard Terminology Relating to Lead in Buildings
ASTM D 7439 : 2014 : REDLINE Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
ASTM D 4185 : 2017 : REDLINE Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
ASTM E 2708 : 2021 : REV A Standard Terminology for Accreditation and Certification
ASTM E 1979 : 2012 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 2051 : 2001 Standard Practice for the Determination of Lead in Paint, Settled Dust, Soil and Air Particulate by Field-Portable Electroanalysis (Withdrawn 2010)
ASTM E 1605 : 2003 : EDT 1 Standard Terminology Relating to Lead in Buildings
ASTM E 1605 : 2019 Standard Terminology Relating to Lead in Buildings
ASTM D 7439 : 2014 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
ASTM D 4185 : 2006 Standard Practice for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
ASTM D 7035 : 2016 : REDLINE Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM E 1979 : 2017 : REDLINE Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM D 3335 : 1985 : REV A : R2014 Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM E 1605 : 2003 Standard Terminology Relating to Lead in Buildings
ASTM E 1613 : 2004 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
ASTM E 1605 : 2018 : REV B Standard Terminology Relating to Lead in Buildings
ASTM E 2708 : 2018 Standard Terminology for Accreditation and Certification
ASTM E 1605 : 2004 Standard Terminology Relating to Lead in Buildings
ASTM D 3335 : 1985 : REV A : R2005 Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM E 1644 : 2004 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E 1979 : 1998 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E 1644 : 1998 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E 2913 : 2014 Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
ASTM E 1605 : 2001 Standard Terminology Relating to Lead in Buildings
ASTM E 2708 : 2021 Standard Terminology for Accreditation and Certification
ASTM E 1644 : 2004 : R2016 : EDT 1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E 2708 : 2010 Standard Terminology for Personnel Credentialing
ASTM D 7035 : 2004 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM E 1605 : 2004 : R2012 Standard Terminology Relating to Lead in Buildings
ASTM E 1605 : 2002 Standard Terminology Relating to Lead in Buildings
ISO 30011:2010 Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
ASTM E 1645 : 2001 : R2016 : EDT 1 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ISO 15202-2:2012 Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 2: Sample preparation
ASTM E 2708 : 2016 Standard Terminology for Accreditation and Certification

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.