ASTM E 180 : 2003
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals (Withdrawn 2009)
Available format(s)
Hardcopy , PDF
Withdrawn date
10-31-2009
Language(s)
English
Published date
10-01-2003
CONTAINED IN VOL. 15.05, 2009 Identifies uniform standards for stating bias and precision of test procedures for speciality and industrial chemicals. Covers an abridged method for development of the information, based upon simple elements of statistical analysis. It is not intended to limit qualified groups in using other techniques.
1.1 This practice establishes uniform standards for expressing the precision and bias of test methods for industrial and specialty chemicals. It includes an abridged procedure for developing this information, based on the simplest elements of statistical analysis. There is no intent to restrict qualified groups in their use of other techniques.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.3 In this practice, the vocabulary and guidelines for calculation and interpretation of statistical data according to the ISO are followed as closely as possible. Particular reference is made to ISO 5725, Parts 1 to 6.
| Committee |
E 15
|
| DocumentType |
Standard Practice
|
| Pages |
14
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Withdrawn
|
| Supersedes |
| ASTM D 3989 : 2001 : R2012 | Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method |
| ASTM D 3792 : 2016 : REDLINE | Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph |
| ASTM E 347 : 1998 | Standard Test Method for Ash in Polybasic Acids (Withdrawn 2003) |
| ASTM E 449:2008 | Standard Test Methods for Analysis of Calcium Chloride |
| ASTM D 4337 : 1989 : R2009 | Standard Test Methods for Analysis of Linear Detergent Alkylates |
| ASTM D 3969 : 2001 | Standard Test Method for Zirconium in Paint Driers by EDTA Method |
| BS ISO 25761:2014 | Plastics. Polyols for use in the production of polyurethanes. Determination of basicity (total amine value), expressed as percent nitrogen |
| 13/30278479 DC : 0 | BS ISO 25761 - PLASTICS - POLYOLS FOR USE IN THE PRODUCTION OF POLYURETHANES - DETERMINATION OF BASICITY (TOTAL AMINE VALUE), EXPRESSED AS PERCENT NITROGEN |
| ASTM D 3162 : 2012 : REDLINE | Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry) |
| ASTM E 318 : 1991 | Test Method for Uranium in Aqueous Solutions by Colorimetry (Withdrawn 1996) |
| ASTM D 2613 : 2001 : R2006 | Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method |
| ASTM D 3988 : 2005 | Standard Test Method for Vanadium in Paint Driers by EDTA Method |
| ASTM D 2373 : 2005 | Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method |
| ASTM D 5910 : 2005 | Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography |
| BS ISO 14900:2017 | Plastics. Polyols for use in the production of polyurethane. Determination of hydroxyl number |
| ASTM D 4711 : 1989 : R2009 | Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids |
| ASTM D 4274 : 2016 : REDLINE | Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols |
| ASTM E 271 : 1998 | Standard Test Methods for Analysis of Aqueous Hydrofluoric Acid (Withdrawn 2003) |
| ASTM D 4711 : 1989 : R2003 | Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids |
| ASTM E 2409 : 2013 : REDLINE | Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol<brk/>(Gas Chromatographic Method) |
| ASTM E 2313 : 2015 : REDLINE | Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry) |
| ASTM D 3989 : 2001 | Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method |
| ASTM D 4789 : 2012 : REDLINE | Standard Test Method for Solution Color of Bisphenol A (4,4`-Isopropylidenediphenol) |
| ASTM E 2679 : 2009 : R2016 : EDT 1 | Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by<brk />Non-Aqueous Potentiometric Titration |
| ASTM D 4563 : 2002 : R2015 | Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint |
| ASTM E 1584 : 2017 : REDLINE | Standard Test Method for Assay of Nitric Acid |
| ASTM E 217 : 1985 | Test Method for Uranium by Controlled-Potential Coulometry (Withdrawn 1992) |
| ASTM D 7133 : 2016 : REDLINE | Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids |
| ASTM E 533 : 1998 | Standard Test Method for Trace Amounts of Arsenic in Inorganic Industrial Chemicals (Withdrawn 2003) |
| ASTM E 2664 : 2016 : REDLINE | Standard Test Method for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol |
| ASTM D 3329 : 2003 | Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography |
| ASTM E 302 : 1995 | Test Methods for Monobasic Organic Acids (Withdrawn 2001) |
| ASTM D 3670 : 1991 : R2001 | Standard Guide for Determination of Precision and Bias of Methods of Committee D22 |
| ASTM D 4252 : 1989 : R2017 | Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates |
| ASTM D 3804 : 2002 : R2008 | Standard Test Method for Iron in Paint Driers by EDTA Method |
| ASTM D 3988 : 2005 : R2017 | Standard Test Method for Vanadium in Paint Driers by EDTA Method |
| ASTM E 70 : 2007 : R2015 | Standard Test Method for pH of Aqueous Solutions With the Glass Electrode |
| ASTM D 4608 : 1989 : R2017 | Standard Test Method for Citrate in Detergents |
| ASTM D 3893 : 2003 : R2009 | Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography |
| ASTM D 6093 : 1997 : R2003 | Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer |
| ASTM D 3970 : 2005 | Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination |
| ASTM D 3362 : 2005 | Standard Test Method for Purity of Acrylate Esters by Gas Chromatography (Withdrawn 2011) |
| ASTM D 4251 : 1989 : R1995 : EDT 1 | Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration |
| ASTM E 1100 : 1992 | Test Method for Gas Chromatographic Analysis of Specially Denatured Ethanol, Formula SD-3A (Withdrawn 1998) |
| ASTM E 2037 : 2015 : REDLINE | Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC) |
| ASTM D 6806 : 2002 | Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography |
| ASTM D 5325 : 2003 : R2008 : EDT 1 | Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints |
| ASTM E 790 : 2015 : REDLINE | Standard Test Method for Residual Moisture in Refuse-Derived Fuel Analysis Samples |
| ASTM E 953 : 1988 : R1998 | Standard Test Method for Fusibility of Refuse-Derived Fuel (RDF) Ash |
| ASTM E 70 : 2007 | Standard Test Method for pH of Aqueous Solutions With the Glass Electrode |
| ASTM D 6437 : 2005 : R2010 : EDT 1 | Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols) |
| ASTM E 357 : 1998 : R2003 : EDT 1 | Standard Test Method for Phosphorus in Organic Compounds by Sodium Peroxide Bomb Ignition (Withdrawn 2008) |
| ASTM D 4660 : 2012-06 | TEST METHODS FOR POLYURETHANE RAW MATERIALS: DETERMINATION OF THE ISOMER CONTENT OF TOLUENEDIISOCYANATE |
| ASTM E 1547 : 2009 | Standard Terminology Relating to Industrial and Specialty Chemicals |
| ASTM F 2405 : 2004 : R2011 | Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer (Withdrawn 2020) |
| ASTM D 5325 : 2003 | Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints |
| ASTM E 1787 : 2016 : REDLINE | Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography |
| ASTM E 1899 : 2016 : REDLINE | Standard Test Method for Hydroxyl Groups Using Reaction with <emph type="ital">p</emph >-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide |
| ASTM D 1363 : 2006 | Standard Test Method for Permanganate Time of Acetone and Methanol |
| ASTM D 6806 : 2002 : R2017 | Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography |
| ASTM D 6093 : 1997 : R2016 | Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer |
| ASTM E 324 : 2016 | Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals |
| ISO 14900:2017 | Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number |
| ASTM D 2375 : 2005 | Standard Test Method for Manganese in Paint Driers by EDTA Method |
| ASTM D 7232:2006 | Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight |
| ASTM D 4251 : 1989 : R2009 | Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration |
| ASTM D 3257 : 2006 | Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography |
| ASTM D 4337 : 1989 : R2017 | Standard Test Methods for Analysis of Linear Detergent Alkylates |
| ASTM E 914 : 1983 | PRACTICE FOR EVALUATION OF TEMPERATURE SCALE FOR THERMOGRAVITY |
| ASTM D 3620 : 2004 | Standard Specification for Glacial Acetic Acid |
| ASTM D 5200 : 2003 : R2008 : EDT 1 | Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans |
| ASTM D 4457 : 2002 : R2014 | Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph (Withdrawn 2019) |
| ASTM E 300 : 2003 : R2009 | Standard Practice for Sampling Industrial Chemicals |
| ASTM E 711 : 1987 : R2004 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter (Withdrawn 2004) |
| ASTM D 6714 : 2016 : REDLINE | Standard Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation) |
| ASTM D 2373 : 2005 : R2011 | Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method (Withdrawn 2016) |
| ASTM D 5200 : 2003 : R2014 | Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans |
| ISO 25761:2014 | Plastics Polyols for use in the production of polyurethanes Determination of basicity (total amine value), expressed as percent nitrogen |
| ASTM D 5806 : 1995 : R2009 | Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration |
| ASTM D 4457 : 2002 | Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph |
| ASTM D 5806 : 1995 : R2003 | Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration |
| CGSB 25.1-13.2 : 1995 | METHODS OF SAMPLING AND TESTING WAXES AND POLISHES - STANDARD TEST METHOD FOR PH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE |
| ASTM D 3989 : 2001 : R2006 | Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method |
| ASTM D 3545 : 2006 | Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography |
| ASTM D 4608 : 1989 : R2009 | Standard Test Method for Citrate in Detergents |
| ASTM D 4764 : 2001 : R2006 | Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint |
| ASTM D 3670 : 1991 : R1996 : EDT 1 | Standard Guide for Determination of Precision and Bias of Methods of Committee D22 |
| ASTM D 7232 : 2006 : R2016 | Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight |
| ASTM D 7232 : 2006 : R2012 | Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight |
| ASTM D 4251 : 1989 : R2016 | Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration |
| ASTM D 2804 : 2002 : R2012 | Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography (Withdrawn 2021) |
| ASTM D 3960 : 2005 | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
| ASTM D 4017 : 2002 : R2015 | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
| ASTM D 2369 : 2010 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 3329 : 2003 : R2017 | Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography |
| ASTM D 4584 : 2005 | Standard Test Method for Measuring Apparent pH of Electrocoat Baths |
| ASTM D 2613 : 2001 : R2017 | Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method |
| ASTM D 2369 : 2010 : EDT 1 | Standard Test Method for Volatile Content of Coatings |
| ASTM E 357 : 1998 | Standard Test Method for Phosphorus in Organic Compounds by Sodium Peroxide Bomb Ignition |
| ASTM D 2369 : 2010 : R2015 : EDT 1 | Standard Test Method for Volatile Content of Coatings |
| ASTM D 3960 : 2005 : R2013 | Standard Practice for Determining Volatile Organic Compound (VOC)Content of Paints and Related Coatings |
| ASTM D 3620 : 2004 : R2009 | Standard Specification for Glacial Acetic Acid |
| ASTM E 830 : 1987 : R2004 | Standard Test Method for Ash in the Analysis Sample of Refuse-Derived Fuel (Withdrawn 2004) |
| ASTM D 3969 : 2001 : R2012 | Standard Test Method for Zirconium in Paint Driers by EDTA Method |
| ASTM D 5547 : 1995 : R2009 | Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption |
| ASTM E 611 : 2008 : R2015 : EDT 1 | Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography (Withdrawn 2020) |
| ASTM E 321 : 1996 : R2005 | Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method) |
| ASTM E 321 : 1996 | Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method) |
| ASTM E 300 : 2003 | Standard Practice for Sampling Industrial Chemicals |
| ASTM D 3893 : 2003 : R2017 | Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography |
| ASTM D 3970 : 2005 : R2017 | Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination |
| ASTM D 5547 : 1995 : R2017 | Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption |
| ASTM D 3804 : 2002 : R2014 | Standard Test Method for Iron in Paint Driers by EDTA Method |
| ASTM E 257 : 1998 | Standard Test Method for Sulfur in Organic Compounds by Sodium Peroxide Bomb Ignition |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| ASTM D 4764 : 2001 : R2012 | Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint |
| ASTM D 5325 : 2003 : R2014 | Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints |
| ASTM D 4608 : 1989 : R1995 : EDT 1 | Standard Test Method for Citrate in Detergents |
| ASTM D 3804 : 2002 | Standard Test Method for Iron in Paint Driers by EDTA Method |
| ASTM E 223 : 2016 : REDLINE | Standard Test Methods for Analysis of Sulfuric Acid |
| ASTM D 3125 : 2006 : R2012 | Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid (Withdrawn 2021) |
| ASTM E 300 : 2003 : R2017 | Standard Practice for Sampling Industrial Chemicals |
| ASTM E 2036 : 2015 : REDLINE | Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC) |
| ASTM D 6093 : 1997 : R2011 | Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer |
| ASTM E 441 : 1990 | Test Method for Vinyl Unsaturation in Organic Compounds with Mercuric Acetate (Withdrawn 1996) |
| ASTM D 4584 : 2005 : R2010 | Standard Test Method for Measuring Apparent pH of Electrocoat Baths |
| ASTM D 1475 : 2013 : REDLINE | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
| ASTM E 1060 : 1985 | PRACTICE FOR INTERLABORATORY TESTING OF SPECTROCHEMICAL METHODS OF ANALYSIS |
| ASTM E 200 : 2016 : REDLINE | Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis |
| ASTM D 4711 : 1989 : R2017 | Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids |
| ASTM D 3064 : 1997 : R2008 | Terminology Relating to Aerosol Products |
| ASTM D 5910 : 2005 : R2012 | Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography |
| ASTM D 4584 : 2005 : R2015 | Standard Test Method for Measuring Apparent pH of Electrocoat Baths |
| ASTM E 829 : 2016 | Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis |
| ASTM E 411 : 2017-05 | TEST METHOD FOR TRACE QUANTITIES OF CARBONYL COMPOUNDS WITH 2,4-DINITROPHENYLHYDRAZINE |
| ASTM E 830 : 1987 : R1996 | Standard Test Method for Ash in the Analysis Sample of Refuse-Derived Fuel |
| ASTM F 1710 : 2008 : R2016 | Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer (Withdrawn 2023) |
| ASTM D 4251 : 1989 : R2003 | Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration |
| ASTM D 4563 : 2002 : R2008 | Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint |
| ASTM D 4213 : 2008 | Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
| ASTM D 3988 : 2005 : R2011 | Standard Test Method for Vanadium in Paint Driers by EDTA Method |
| ASTM D 6438 : 2005 : R2010 | Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography |
| ASTM E 567 : 1991 | Test Method for Tertiary Hydroxyl Groups with Hydrogen Bromide (Withdrawn 1996) |
| ASTM D 4213 : 2008 : R2012 | Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
| ASTM D 4608 : 1989 : R2003 | Standard Test Method for Citrate in Detergents |
| ASTM D 4711 : 1989 : R1995 : EDT 1 | Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids |
| ASTM E 202 : 2012-06 | TEST METHODS FOR ANALYSIS OF ETHYLENE GLYCOLS AND PROPYLENE GLYCOLS |
| ASTM D 1363 : 2006 : R2011 | Standard Test Method for Permanganate Time of Acetone and Methanol |
| ASTM D 4451 : 2002 | Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing |
| ASTM E 222 : 2017 : REDLINE | Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation |
| ASTM D 2195 : 2005 | Standard Test Methods for Pentaerythritol (Withdrawn 2011) |
| ASTM E 1064 : 2016 : REDLINE | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM D 5547 : 1995 : R2003 | Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption |
| ASTM E 1615 : 2016 : REDLINE | Standard Test Method for Iron in Trace Quantities Using the FerroZine Method |
| ASTM D 4337 : 1989 : R1995 : EDT 1 | Standard Test Methods for Analysis of Linear Detergent Alkylates |
| ASTM E 611 : 2008 | Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography |
| ASTM D 2804 : 2002 : R2007 | Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography |
| ASTM E 449 : 2008 : R2013 | Standard Test Methods for Analysis of Calcium Chloride |
| ASTM E 358 : 1995 | Test Methods for Analysis of Phosphoric Acid (Withdrawn 2000) |
| ISO 17710:2002 | Plastics — Polyols for use in the production of polyurethane — Determination of degree of unsaturation by microtitration |
| ASTM D 4764 : 2001 : R2016 | Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint |
| ASTM D 5629 : 2016 : REDLINE | Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers |
| ASTM E 897 : 1988 : R2004 | Standard Test Method for Volatile Matter in the Analysis Sample of Refuse-Derived Fuel (Withdrawn 2004) |
| ASTM D 5517 : 2014 : REDLINE | Standard Test Method for Determining Extractability of Metals from Art Materials |
| ASTM D 3670 : 1991 : R2007 | Standard Guide for Determination of Precision and Bias of Methods of Committee D22 |
| ASTM E 325 : 1991 | Test Method for Silicon in Organic Compounds by Sodium Peroxide Bomb Ignition (Withdrawn 1996) |
| ASTM D 4451 : 2002 : R2008 | Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing |
| ASTM E 819 : 1998 | Standard Test Method for Trace Amounts of Arsenic in Organic Industrial Chemicals (Withdrawn 2003) |
| ASTM E 700 : 1979 : R1990 : EDT 1 | Test Method for Water in Gases Using Karl Fischer Reagent (Withdrawn 1995) |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| BS ISO 14899:2001 | Plastics. Polyols for use in the production of polyurethane. Determination of basicity |
| ASTM D 6979 : 2013-11 | TEST METHOD FOR POLYURETHANE RAW MATERIALS: DETERMINATION OF BASICITY IN POLYOLS, EXPRESSED AS PERCENT NITROGEN |
| ASTM D 2613 : 2001 | Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method |
| ASTM D 2374 : 2005 | Standard Test Method for Lead in Paint Driers by EDTA Method |
| ASTM E 2469 : 2016 : REDLINE | Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography |
| ASTM D 4017 : 2002 | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
| ASTM D 6437 : 2005 | Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols) |
| ASTM D 5200:2003 | Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans |
| ASTM E 953 : 1988 : R2004 | Standard Test Method for Fusibility of Refuse-Derived Fuel (RDF) Ash |
| ASTM E 234 : 1998 | Standard Test Method for Total Bromine Number of Unsaturated Aliphatic Chemicals |
| ASTM D 5806 : 1995 | Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration |
| ASTM E 203 : 2016 : REDLINE | Standard Test Method for Water Using Volumetric Karl Fischer Titration |
| ASTM D 5145 : 2009 : R2014 | Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths |
| ASTM E 1230 : 1996 | Test Method for the Approximate Determination of Low Molecular Weight Hydrocarbons in Anhydrous Hydrogen Fluoride (Withdrawn 2001) |
| ASTM D 3064 : 1997 : R2003 | Terminology Relating to Aerosol Products |
| ASTM D 6806 : 2002 : R2007 : EDT 1 | Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography |
| ASTM D 4563 : 2002 | Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint |
| ASTM D 3970 : 2005 : R2011 | Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination |
| ASTM E 1228 : 2017 : REDLINE | Standard Test Method for Assay of Peroxy Esters—Catalyzed Iodometric Procedure |
| ASTM F 2405 : 2004 | Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer |
| ASTM E 1547 : 2009 : R2017 | Standard Terminology Relating to Industrial and Specialty Chemicals |
| ASTM D 4764 : 2001 | Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint |
| ASTM D 6806 : 2002 : R2012 | Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography |
| ASTM D 3125 : 2006 | Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid |
| ASTM C 242 : 2018 : REDLINE | Standard Terminology of Ceramic Whitewares and Related Products |
| ASTM D 3960 : 2005 : R2018 | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
| ASTM E 394 : 2015 : REDLINE | Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method |
| ASTM D 3620 : 2004 : R2017 | Standard Specification for Glacial Acetic Acid |
| ASTM D 3980 : 1988 | Practice for Interlaboratoy Testing of Paint and Related Materials (Withdrawn 1998) |
| ASTM E 534 : 2013-11 | TEST METHODS FOR CHEMICAL ANALYSIS OF SODIUM CHLORIDE |
| ASTM D 3064 : 1997 | Terminology Relating to Aerosol Products |
| ASTM D 4252 : 1989 : R2003 | Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates |
| ASTM E 440 : 1972 : R1988 | Test Method for Traces of Peroxides in Organic Solvents with N, N=+ -Diphenyl-P-Phenylenediamine (Withdrawn 1994) |
| ASTM D 4252 : 1989 : R2009 | Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates |
| ASTM E 224 : 2016 : REDLINE | Standard Test Methods for Analysis of Hydrochloric Acid |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| ASTM D 6438 : 2005 : R2015 | Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography |
| ASTM E 326 : 1996 | Test Method for Hydroxyl Groups by Phthalic Anhydride Esterification (Withdrawn 2001) |
| ASTM E 70 | TEST METHOD FOR PH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE |
| ASTM D 3329 : 2003 : R2009 | Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography |
| BS ISO 17710:2002 | Plastics. Polyols for use in the production of polyurethane. Determination of degree of unsaturation by microtitration |
| ASTM D 6437 : 2005 : R2016 : EDT 1 | Standard Test Method for Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols) |
| ASTM D 2375 : 2005 : R2011 | Standard Test Method for Manganese in Paint Driers by EDTA Method (Withdrawn 2016) |
| ASTM D 3969 : 2001 : R2006 | Standard Test Method for Zirconium in Paint Driers by EDTA Method |
| ASTM E 335 : 1996 | Standard Test Method for Hydroxyl Groups by Pyromellitic Dianhydride Esterification (Withdrawn 2003) |
| ASTM D 3257 : 2006 : R2012 | Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography (Withdrawn 2021) |
| ASTM D 4252 : 1989 : R1995 : EDT 1 | Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates |
| ASTM D 4671 : 2016 : REDLINE | Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of Polyols |
| ASTM D 6656 : 2016 : REDLINE | Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation) |
| ASTM D 5145 : 2009 | Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths |
| ASTM D 6438 : 2005 | Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography |
| ASTM E 233 : 1990 | Test Method for Assay of N-Butyllithium Solutions (Withdrawn 1996) |
| ASTM D 5547 : 1995 | Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption |
| ASTM E 776 : 2016 : REDLINE | Standard Test Method for Determination of Forms of Chlorine in Refuse-Derived Fuel |
| ASTM E 611 : 2008 : R2015 | Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography |
| ASTM D 4337 : 1989 : R2003 | Standard Test Methods for Analysis of Linear Detergent Alkylates |
| ASTM E 778 : 2015 : REDLINE | Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples |
| ASTM D 2804 : 2002 | Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 3893 : 2003 | Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography |
| ASTM D 5806 : 1995 : R2017 | Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration |
| ASTM E 2679 : 2009 | Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by<br> Non-Aqueous Potentiometric Titration |
| ASTM E 359 : 2017 : REDLINE | Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) |
| ASTM E 2193 : 2016 : REDLINE | Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry) |
| ASTM D 3670 : 1991 : R2014 | Standard Guide for Determination of Precision and Bias of Methods of Committee D22 |
| ASTM D 4017 : 2002 : R2008 : EDT 1 | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
| ASTM F 1710 : 2008 | Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer |
| ASTM E 321 : 1996 : R2012 | Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method) |
| ASTM D 4457 : 2002 : R2008 | Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph |
| ASTM D 4451 : 2002 : R2014 | Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing |
| ASTM D 6093 : 1997 | Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer |
| ASTM D 3545 : 2006 : R2012 | Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography (Withdrawn 2021) |
| ASTM D 2374 : 2005 : R2011 | Standard Test Method for Lead in Paint Driers by EDTA Method (Withdrawn 2016) |
| ASTM E 711 : 1987 : R1996 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter |
| ASTM E 775 : 2015 : REDLINE | Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel |
| ASTM D 2613 : 2001 : R2012 | Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method |
| ASTM E 897 : 1988 : R1998 | Standard Test Method for Volatile Matter in the Analysis Sample of Refuse-Derived Fuel |
| ASTM E 177 : 2014 : REDLINE | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM D 1727 : 1960 : REV T : R1976 | Method of Test for Urea Content of Nitrogen Resins (Withdrawn 1982) |
| ASTM D 1013 : 1993 : R1998 | Standard Test Method for Determining Total Nitrogen in Resins and Plastics (Withdrawn 2007) |
| ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
US$83.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.